Tabletop Water Dispenser for Household

[leadbyexample]

Nope. Most of the new houses have this layout so installation is all done this way unless they decide to pull the inlet / outlet to the other side but that will require owners to hack the floor tiles and overlay which many of the new owners do not want because they got to spend extra money.

So did stitch pm you about his issue? If so what was his issue? Can resolve?

 

[leadbyexample]

Lol just say this thread. Using a swisspro water dispenser and filter, can dispense hot, cold and carbonated water by just tapping a button. Used for at least a year, highly recommended

Got photo of the one you’re using?

 

[cooler628]

Then how does the onyx work if it is truly tankless? Can share?

Bro when you press for water to dispenser, it will start to pump water out from the tap, that is why there is a delay of around 2 to 3 secs before water flow out. When you are there at the showroom, there is a demo unit where you able to see the inside of the unit, there is no tank to store the water. i m not the expert, hopefully I answer your question.

 

[leadbyexample]

My CEO Benjamin went down to the customer’s house to resolve the issue so all is good now! The review has also been removed

Your boss also started Livingcare?
https://www.homeanddecor.com.sg/gal...purifier-is-the-first-step-to-healthy-living/

 

[Vinified]

Brand	Happie	Livingcare	Hydroflux	Ruhens	Wells	Apure
Model	Joy	Onyx	Nami	Quint	True Tankless UV+	Titan Pro
Price	1688++	2288++	2188++	2499++	2700++	1199++
Filter warranty (free filter)	3 years	4 years	4 years	3 years	4 set filters? (4 years maybe?)	1 year
Warranty	3 years (1 year Motor)	3 years	Life time (1 year Motor)	3 years	3 years	1 year
Service filter Freq	Every 12 months	Every 12 months	Every 1&2 months (two filters)	unknown	unknown
Service filter price		240		249
Inlet/outlet	Yes/Unknown	Yes/Yes	Yes/Unknown	Yes/Unknown	Yes/Unknown	Yes/Unknown
Cons:		Outlet dispense alot of water	Water not as cold

I made a short list, can anyone fill up e blanks or let me know any of the missing/incorrect info?

Have two data points to add to the table. Volume dispensed and width of dispenser

Really curious if the lack of 250ml volume is a consideration for others.

Happie 120/500/cont
Onyx 110/250/500
Nami 120/500/cont
Quint 120/250/500

Sterra S 120/250/550/cont
Purehan Super cooling 120/250/500/1L

Width of the dispenser:

Onyx 135mm
Quint 160mm
Sterra S 182mm
Purehan Super cooling 190mm

 

[Deceased]

To me the cold temps are important. So far the lowest a brand can do is 4c. Not sure why can’t it be lower like 2-3c as my experience of using such machine is that the coldest is just achievable for that few second of dispense and the more it dispense the less cold it will get. The part (motor?) that is making water cold will also get less effective/efficient over time too. This is why I only go for those that can do 4c and below.

I see this cuckoo brand only mention specs about hot temp but no info about cold temp at all throughout the entire web so when the salesperson told me it can do 4c I am already quite skeptical Liao (trying to anyhow smoke).

 

[yumyumz]

Anyone tried those brand like raslok, wow etc that can be found on shopee? Selling ard $300 only.. Other than the looks and design, how does those selling at $1-2k differentiate themselves? Is it worth the price difference?


Read HWZ Forum Rules!

 

[hkchew03]

Anyone tried those brand like raslok, wow etc that can be found on shopee? Selling ard $300 only.. Other than the looks and design, how does those selling at $1-2k differentiate themselves? Is it worth the price difference?


Read HWZ Forum Rules!

You can check out the shop at IMM, happen the saw this brand ytd. Another brand is Fuji, only 300+ with installation, filter is $100/set much lower than raslok. Con is it is quite plain looking and pretty huge.

 

[hkchew03]

To me the cold temps are important. So far the lowest a brand can do is 4c. Not sure why can’t it be lower like 2-3c as my experience of using such machine is that the coldest is just achievable for that few second of dispense and the more it dispense the less cold it will get. The part (motor?) that is making water cold will also get less effective/efficient over time too. This is why I only go for those that can do 4c and below.

I see this cuckoo brand only mention specs about hot temp but no info about cold temp at all throughout the entire web so when the salesperson told me it can do 4c I am already quite skeptical Liao (trying to anyhow smoke).

Probably quite hard to instantly reduce temp to 4c especially when dispensing moderate amount unless output flow is restricted. Some uses cold storage tank to solve this issue, but will increase power consumption.

Anyone tried those brand like raslok, wow etc that can be found on shopee? Selling ard $300 only.. Other than the looks and design, how does those selling at $1-2k differentiate themselves? Is it worth the price difference?


Read HWZ Forum Rules!

You can check out the shop at IMM, happen the saw this brand ytd. Another brand is Fuji, only 300+ with installation, filter is $100/set much lower than raslok. Con is it is quite plain looking and huge. SG water is relatively safe, find little reason to pay so much for expensive purifier.

 

[Tucksoon]

Hi everyone,

I am hit with my bummer when I was told by my plumber it is difficult to fix an outlet pipe from most water dispensers which require outlet. What are the possible workarounds? Thanks.

 

[hotsnowi]

anyone tried Focuswater dispenser?

 

[yeswecan]

Anyone tried LG PuriCare? It is available in MY but not in SG... Not sure why but I'm keen to buy it from MY.

 

[johnsonheng]

Do you have a dispenser that do not use a filter?

anyone to recommend. but i do not any pipe to be be attached to it.
must i need to pure water manully.

 

[couch.potato]

Question: for those who buy the direct pipe type of machine, are u worried that you’ll be locked into the brand? Like if filters raise price by a lot, or if they no longer sell the filters, then the machine will become useless… especially if buying the smaller brands?

 

[cooler628]

To me the cold temps are important. So far the lowest a brand can do is 4c. Not sure why can’t it be lower like 2-3c as my experience of using such machine is that the coldest is just achievable for that few second of dispense and the more it dispense the less cold it will get. The part (motor?) that is making water cold will also get less effective/efficient over time too. This is why I only go for those that can do 4c and below.

I see this cuckoo brand only mention specs about hot temp but no info about cold temp at all throughout the entire web so when the salesperson told me it can do 4c I am already quite skeptical Liao (trying to anyhow smoke).

actually from my understanding that almost all dispenser also become less cold as you dispense out more water. Every morning, I will top up 1,000ML of water, the first 500ML sure no issue but when I start to dispense out the balance 500ML, it will not be as cold liao. But ok lah too much cold water not good for body also... haha

 

[evilmtv]

Have two data points to add to the table. Volume dispensed and width of dispenser

Really curious if the lack of 250ml volume is a consideration for others.

Happie 120/500/cont
Onyx 110/250/500
Nami 120/500/cont
Quint 120/250/500

Sterra S 120/250/550/cont
Purehan Super cooling 120/250/500/1L

Width of the dispenser:

Onyx 135mm
Quint 160mm
Sterra S 182mm
Purehan Super cooling 190mm

purehan is 550 instead of 500 i think, annoying for me cause its just slightly over my bottle

 

[Tucksoon]

I tried a Happie dispenser yesterday at a friend's place. The delay in dispensing hot water (85 degrees) is about 5-8 seconds. The touch buttons are not very responsive.

 

[1a2a3a]

Hi, can anyone recommend what water dispenser to get for new house?

 

[reiser]

Hi, can anyone recommend what water dispenser to get for new house?

I intend to get Well’s The One at the coming Taka promo. It’s too pretty to pass up.

 

[1a2a3a]

I intend to get Well’s The One at the coming Taka promo. It’s too pretty to pass up.

But there’s the issue of cutting the hole and higher cost of water bill. Does that trump aesthetic?