WiFi 7 Device SpeedTest and WiFi 7 adapters

[xiaofan]

Amazon eero Max 7 MLO vs non-MLO Wifi speed.

The best speed for Intel BE200 is quite impressive, either on the 6GHz band, or 5GHz+6GHz MLO. This is especially true for the upload speed.

On the other hand, if you watch the full video, you can see the speeds vary by quite a bit.

1) 6GHz band.

2) 5GHz+6GHz MLO

 

[xiaofan]

ZTE BE7200 PRO+ WiFi 7 performance, main 2.4GHz+5GHz MLO SSID
Acer Swift Go 14 laptop 2024 model, Intel BE200 based Intel Killer BE1750 WiFi 7 adapter

3m distance

PS C:\work\networking\ookla-speedtest-1.2.0-win64> .\speedtest.exe -s 13623

   Speedtest by Ookla

      Server: Singtel - Singapore (id: 13623)
         ISP: Singtel Fibre
Idle Latency:     3.79 ms   (jitter: 0.32ms, low: 3.45ms, high: 4.19ms)
    Download:  1427.51 Mbps (data used: 2.4 GB)
                 12.29 ms   (jitter: 8.22ms, low: 3.87ms, high: 236.93ms)
      Upload:   989.87 Mbps (data used: 1.3 GB)
                 11.94 ms   (jitter: 5.16ms, low: 3.65ms, high: 35.93ms)
 Packet Loss:     0.0%
  Result URL: https://www.speedtest.net/result/c/bd59f510-4824-4a60-8f08-304ab8b133fa

1m distance

PS C:\work\networking\ookla-speedtest-1.2.0-win64> .\speedtest.exe -s 13623

   Speedtest by Ookla

      Server: Singtel - Singapore (id: 13623)
         ISP: Singtel Fibre
Idle Latency:     4.79 ms   (jitter: 0.46ms, low: 4.63ms, high: 5.54ms)
    Download:  1935.10 Mbps (data used: 3.4 GB)
                 15.97 ms   (jitter: 7.88ms, low: 4.74ms, high: 237.66ms)
      Upload:  1343.83 Mbps (data used: 1.6 GB)
                  8.48 ms   (jitter: 2.49ms, low: 4.52ms, high: 16.78ms)
 Packet Loss:     0.0%
  Result URL: https://www.speedtest.net/result/c/a87fe6ed-5707-4c28-8831-9f4d0b5162e1

 

[xiaofan]

1. Asus TUF-BE6500 WiFi performance, 2.4GHz+5GHz main SSID (WiFi 7, MLO)
Acer Swift Go 14 laptop 2024 model, Intel BE200 based Intel Killker BE1750 WiFi 7 adapter.

1) 3m distance

https://www.speedtest.net/result/d/8c67a587-ae5a-4690-bb99-b49ab926d32b

2) 1m distance

https://www.speedtest.net/result/d/d3d41a0d-c7e8-4c79-8826-8a29be336566

 

[xiaofan]

Quite some test results in the video -- just the close range speed shown here.

 

[xiaofan]

Xiaomi BE5000 WiFi performance, 2.4GHz+5GHz main SSID (WiFi 7, MLO)
Acer Swift Go 14 laptop 2024 model, Intel BE200 based Intel Killker BE1750 WiFi 7 adapter.

3m distance
https://www.speedtest.net/result/d/0661520b-1db8-4cb7-893e-94745e583a47

 

[xiaofan]

Usually I like to use 160MHz on 5GHz band when carrying out speedtest as that usually yields higher speed. But many people may not be able to get 160MHz channel Bandwidth working well due to interferences from the neighbours.

Wireless speedtest for WiFi 7 routers with 5GHz band, 80MHz vs 160MHz Channel Bandwidth.

1. Test condition:
All wireless routers-- 5GHz band, 80MHz channel bandwidth.
Acer Swift Go 14 2024 model, Intel BE200 WiFi 7 chipset, 3m distance to the router.

The Asus RT-AX86U is always present (since the other family members need to use wireless, using CH149 and 80MHz channel bandwidth) and it is 1m away from the other routers (one at a time, using CH60 on 5GHz band).

Reference speed for RT-AX86U (WiFi 6, 1024QAM), 1201Mbps PHY Speed.

PS C:\work\networking\ookla-speedtest-1.2.0-win64> .\speedtest.exe -s 13623

   Speedtest by Ookla

      Server: Singtel - Singapore (id: 13623)
         ISP: Singtel Fibre
Idle Latency:     3.10 ms   (jitter: 0.78ms, low: 2.44ms, high: 3.51ms)
    Download:   843.45 Mbps (data used: 1.5 GB)
                 17.26 ms   (jitter: 5.91ms, low: 5.02ms, high: 31.49ms)
      Upload:   500.67 Mbps (data used: 296.7 MB)
                 21.37 ms   (jitter: 16.37ms, low: 4.60ms, high: 153.13ms)
 Packet Loss:     0.0%
  Result URL: https://www.speedtest.net/result/c/d964d050-49dc-4cb1-a88b-bd742f102b4a

2. Asus TUF-BE6500 dual band WiFi 7, Asus Stock FW, CH60, 5GHz band, AP mode with 2.5Gbe WAN connection, behind main OpenWRT router.

1) 160 MHz channel bandwidth on 5GHz band. 2.4GHz+5GHz MLO enabled. PHY Speed 2882 Mbps.

PS C:\work\networking\ookla-speedtest-1.2.0-win64> .\speedtest.exe -s 13623

   Speedtest by Ookla

      Server: Singtel - Singapore (id: 13623)
         ISP: Singtel Fibre
Idle Latency:     3.47 ms   (jitter: 0.05ms, low: 3.44ms, high: 3.55ms)
    Download:  1399.18 Mbps (data used: 1.8 GB)
                  9.30 ms   (jitter: 6.58ms, low: 3.13ms, high: 238.35ms)
      Upload:   978.15 Mbps (data used: 775.5 MB)
                 11.53 ms   (jitter: 5.30ms, low: 3.60ms, high: 39.81ms)
 Packet Loss:     0.0%
  Result URL: https://www.speedtest.net/result/c/af3f0401-873a-430a-9381-56191c2662d7

2) 80 MHz channel bandwidth on 5GHz band. 2.4GHz+5GHz MLO enabled.
But MLO is no longer working in this case, fall back to 5GHz WiFi 6 connection. PHY Speed 1441 Mbps.

PS C:\work\networking\ookla-speedtest-1.2.0-win64> .\speedtest.exe -s 13623

   Speedtest by Ookla

      Server: Singtel - Singapore (id: 13623)
         ISP: Singtel Fibre
Idle Latency:     3.78 ms   (jitter: 0.73ms, low: 3.02ms, high: 4.34ms)
    Download:   854.87 Mbps (data used: 1.5 GB)
                 18.70 ms   (jitter: 7.09ms, low: 3.71ms, high: 45.69ms)
      Upload:   668.81 Mbps (data used: 1.1 GB)
                 18.33 ms   (jitter: 10.09ms, low: 3.54ms, high: 117.16ms)
 Packet Loss:     0.0%
  Result URL: https://www.speedtest.net/result/c/dc11bfd0-9d01-44b6-8d90-0814ebfd8fcc

 

[xiaofan]

3. Xiaomi BE5000 dual band WiFi 7, Xiaomi Stock FW, CH60, 5GHz band
2.5Gbe WAN Connection (Double NAT behind main OpenWRT router)

1) 160/80/40/20 MHz channel bandwidth on 5GHz band. MLO disabled. PHY Speed 2882 Mbps (160Mhz)

PS C:\work\networking\ookla-speedtest-1.2.0-win64> .\speedtest.exe -s 13623

   Speedtest by Ookla

      Server: Singtel - Singapore (id: 13623)
         ISP: Singtel Fibre
Idle Latency:     3.61 ms   (jitter: 0.35ms, low: 3.45ms, high: 3.93ms)
    Download:  1511.63 Mbps (data used: 2.7 GB)
                 10.46 ms   (jitter: 3.76ms, low: 4.72ms, high: 34.24ms)
      Upload:  1197.21 Mbps (data used: 1.1 GB)
                  9.15 ms   (jitter: 4.70ms, low: 3.16ms, high: 48.45ms)
 Packet Loss:     0.0%
  Result URL: https://www.speedtest.net/result/c/c95ab1e8-e697-459d-ac5b-688f9fb59a3d

2) 80 MHz channel bandwidth. MLO disabled. PHY Speed 1441 Mbps.

PS C:\work\networking\ookla-speedtest-1.2.0-win64> .\speedtest.exe -s 13623

   Speedtest by Ookla

      Server: Singtel - Singapore (id: 13623)
         ISP: Singtel Fibre
Idle Latency:     3.98 ms   (jitter: 0.20ms, low: 3.66ms, high: 4.16ms)
    Download:   983.25 Mbps (data used: 960.8 MB)
                 18.16 ms   (jitter: 5.76ms, low: 5.65ms, high: 35.56ms)
      Upload:   832.43 Mbps (data used: 1.2 GB)
                 14.87 ms   (jitter: 6.45ms, low: 2.75ms, high: 63.36ms)
 Packet Loss:     0.0%
  Result URL: https://www.speedtest.net/result/c/4e606b54-252b-4118-8533-f8bbce2dffe5

 

[xiaofan]

4. ZTE BE7200 dual band WiFi 7, ZTE Stock FW, CH60, 5GHz band
2.5Gbe WAN connection, Double NAT behind main OpenWRT router.

1) 160/80/40/20 MHz channel bandwidth. main 2.4GHz+5GHz MLO SSID, PHY Speed 2882 Mbps (160MHz on 5GHz band and 20MHz on 2.4GHz band)

PS C:\work\networking\ookla-speedtest-1.2.0-win64> .\speedtest.exe -s 13623

   Speedtest by Ookla

      Server: Singtel - Singapore (id: 13623)
         ISP: Singtel Fibre
Idle Latency:     3.57 ms   (jitter: 0.15ms, low: 3.37ms, high: 3.87ms)
    Download:  1271.14 Mbps (data used: 2.2 GB)
                  9.93 ms   (jitter: 3.84ms, low: 3.90ms, high: 50.30ms)
      Upload:   684.88 Mbps (data used: 429.4 MB)
                 13.05 ms   (jitter: 3.60ms, low: 7.04ms, high: 35.28ms)
 Packet Loss:     0.0%
  Result URL: https://www.speedtest.net/result/c/3092828d-4772-43cb-adc6-5b07047a2ace

2) 5GHz guest network, 160/80/40/20 MHz channel bandwidth. PHY Speed 2882 Mbps (160MHz channel bandwidth).

PS C:\work\networking\ookla-speedtest-1.2.0-win64> .\speedtest.exe -s 13623

   Speedtest by Ookla

      Server: Singtel - Singapore (id: 13623)
         ISP: Singtel Fibre
Idle Latency:     3.97 ms   (jitter: 0.22ms, low: 3.80ms, high: 4.13ms)
    Download:  1213.76 Mbps (data used: 2.2 GB)
                 13.67 ms   (jitter: 5.42ms, low: 4.11ms, high: 42.35ms)
      Upload:   843.63 Mbps (data used: 920.6 MB)
                 13.30 ms   (jitter: 6.59ms, low: 4.30ms, high: 34.44ms)
 Packet Loss:     0.0%
  Result URL: https://www.speedtest.net/result/c/bee2615f-6688-4f54-b311-4aaa88b5dfca

3) 80 MHz channel bandwidth, main 2.4GHz+5GHz MLO SSID, PHY Speed 2882 Mbps (80MHz on 5GHz band and 20MHz on 2.4GHz band).
MLO is still working but speed drops significantly.

PS C:\work\networking\ookla-speedtest-1.2.0-win64> .\speedtest.exe -s 13623

   Speedtest by Ookla

      Server: Singtel - Singapore (id: 13623)
         ISP: Singtel Fibre
Idle Latency:     3.66 ms   (jitter: 0.33ms, low: 3.51ms, high: 4.36ms)
    Download:   704.94 Mbps (data used: 913.3 MB)
                 17.85 ms   (jitter: 7.76ms, low: 5.88ms, high: 42.28ms)
      Upload:   381.26 Mbps (data used: 648.0 MB)
                 35.79 ms   (jitter: 16.80ms, low: 4.35ms, high: 157.12ms)
 Packet Loss:     0.0%
  Result URL: https://www.speedtest.net/result/c/1b4071a3-b06c-4bfe-ad1f-f5a90578122d

4) 5GHz guest network, 80 MHz channel bandwidth. PHY Speed 1441 Mbps. Same that speed drops significantly.

PS C:\work\networking\ookla-speedtest-1.2.0-win64> .\speedtest.exe -s 13623

   Speedtest by Ookla

      Server: Singtel - Singapore (id: 13623)
         ISP: Singtel Fibre
Idle Latency:     3.09 ms   (jitter: 0.16ms, low: 2.83ms, high: 3.19ms)
    Download:   757.63 Mbps (data used: 1.3 GB)
                 19.32 ms   (jitter: 8.90ms, low: 3.67ms, high: 73.62ms)
      Upload:   284.71 Mbps (data used: 504.8 MB)
                 58.76 ms   (jitter: 21.89ms, low: 3.85ms, high: 175.21ms)
 Packet Loss:     0.0%
  Result URL: https://www.speedtest.net/result/c/d1c24e29-9141-43e6-b4f3-73a0aed67a5f

 

[xiaofan]

5. TP-Link Archer BE805 triband WiFi 7 router, TP-Link stock FW, CH60, 5G band
10Gbe WAN connection, Double NAT behind main OpenWRT router.

1) 5GHz band, 160/80/40/20 MHz channel bandwidth. PHY Speed 2882 Mbps (160MHz)

PS C:\work\networking\ookla-speedtest-1.2.0-win64> .\speedtest.exe -s 13623

   Speedtest by Ookla

      Server: Singtel - Singapore (id: 13623)
         ISP: Singtel Fibre
Idle Latency:     3.57 ms   (jitter: 0.16ms, low: 3.49ms, high: 4.09ms)
    Download:  1580.65 Mbps (data used: 2.8 GB)
                 14.74 ms   (jitter: 6.06ms, low: 3.17ms, high: 34.01ms)
      Upload:   945.10 Mbps (data used: 1.7 GB)
                 12.50 ms   (jitter: 6.78ms, low: 2.66ms, high: 54.70ms)
 Packet Loss:     0.0%
  Result URL: https://www.speedtest.net/result/c/9870cafd-9c38-47c5-b855-b6cfb8836c01

2) 5GHz band, 80/40/20 MHz channel bandwidth. PHY Speed 1441 Mbps (80MHz).

PS C:\work\networking\ookla-speedtest-1.2.0-win64> .\speedtest.exe -s 13623

   Speedtest by Ookla

      Server: Singtel - Singapore (id: 13623)
         ISP: Singtel Fibre
Idle Latency:     3.55 ms   (jitter: 0.22ms, low: 3.31ms, high: 3.80ms)
    Download:   888.70 Mbps (data used: 930.2 MB)
                 16.92 ms   (jitter: 7.72ms, low: 3.22ms, high: 38.28ms)
      Upload:   711.89 Mbps (data used: 1.0 GB)
                 15.85 ms   (jitter: 8.12ms, low: 2.85ms, high: 88.89ms)
 Packet Loss:     0.0%
  Result URL: https://www.speedtest.net/result/c/d3d91eb5-6802-457b-ab07-eaecfd102535

 

[xiaofan]

6. TP-Link Archer BE805 triband WiFi 7 router, TP-Link stock FW, CH85, 6GHz band
10Gbe WAN connection, Double NAT behind main OpenWRT router.

1) 6GHz band, 320/160/80/40/20 MHz channel bandwidth. PHY Speed 5764 Mbps (320MHz)

PS C:\work\networking\ookla-speedtest-1.2.0-win64> .\speedtest.exe -s 13623

   Speedtest by Ookla

      Server: Singtel - Singapore (id: 13623)
         ISP: Singtel Fibre
Idle Latency:     3.61 ms   (jitter: 0.29ms, low: 3.32ms, high: 3.97ms)
    Download:  2715.46 Mbps (data used: 4.8 GB)
                 13.33 ms   (jitter: 5.40ms, low: 3.17ms, high: 43.00ms)
      Upload:  1567.13 Mbps (data used: 2.8 GB)
                  7.68 ms   (jitter: 3.01ms, low: 2.69ms, high: 20.47ms)
 Packet Loss:     0.0%
  Result URL: https://www.speedtest.net/result/c/708e7d85-083c-4a71-95a1-d6a6e280ba88

2) 6GHz band, 160/80/40/20 MHz channel bandwidth. PHY Speed 2882 Mbps (160MHz)

PS C:\work\networking\ookla-speedtest-1.2.0-win64> .\speedtest.exe -s 13623

   Speedtest by Ookla

      Server: Singtel - Singapore (id: 13623)
         ISP: Singtel Fibre
Idle Latency:     3.74 ms   (jitter: 0.12ms, low: 3.52ms, high: 4.00ms)
    Download:  1842.57 Mbps (data used: 3.2 GB)
                 14.64 ms   (jitter: 5.58ms, low: 2.82ms, high: 30.66ms)
      Upload:  1222.18 Mbps (data used: 1.3 GB)
                  9.35 ms   (jitter: 3.79ms, low: 2.99ms, high: 21.19ms)
 Packet Loss:     0.0%
  Result URL: https://www.speedtest.net/result/c/2db6b6b6-6ac4-4026-988c-b5a8b5a7e83e

3) 6GHz band, 80/40/20 MHz channel bandwidth. PHY Speed 1441 Mbps (80MHz)

PS C:\work\networking\ookla-speedtest-1.2.0-win64> .\speedtest.exe -s 13623

   Speedtest by Ookla

      Server: Singtel - Singapore (id: 13623)
         ISP: Singtel Fibre
Idle Latency:     3.80 ms   (jitter: 0.95ms, low: 3.49ms, high: 5.48ms)
    Download:   953.76 Mbps (data used: 1.2 GB)
                 16.72 ms   (jitter: 6.75ms, low: 3.26ms, high: 45.49ms)
      Upload:   662.94 Mbps (data used: 853.0 MB)
                 18.49 ms   (jitter: 7.96ms, low: 4.12ms, high: 56.66ms)
 Packet Loss:     0.0%
  Result URL: https://www.speedtest.net/result/c/1d10e145-0938-4b28-96a6-c67ef538f983

 

[xiaofan]

BTW, TP-Link Archer BE805 WiFi 7 router FW 1.3 has fixed my MLO issues with Intel BE200 based Intel BE1750 WiFi 7 adapter. MLO SSID is now similar to 6GHz band in close range (3m distance tested).

TP-Link Archer BE805 triband WiFi 7 router, TP-Link stock FW, CH85, 5GHz+6GHz MLO,
10Gbe WAN connection, Double NAT behind main OpenWRT router.

6GHz band, 320/160/80/40/20 MHz channel bandwidth, CH85
5GHz band, 160/80/40/20 MHz channel bandwidth, CH60
PHY Speed 5764 Mbps (same as 6GHz band with 320MHz channel bandwidth)

PS C:\work\networking\ookla-speedtest-1.2.0-win64> .\speedtest.exe -s 13623

   Speedtest by Ookla

      Server: Singtel - Singapore (id: 13623)
         ISP: Singtel Fibre
Idle Latency:     3.49 ms   (jitter: 0.33ms, low: 3.37ms, high: 3.98ms)
    Download:  2639.44 Mbps (data used: 4.6 GB)
                 12.26 ms   (jitter: 5.19ms, low: 3.93ms, high: 32.14ms)
      Upload:  1545.14 Mbps (data used: 1.0 GB)
                  8.81 ms   (jitter: 2.66ms, low: 4.21ms, high: 23.87ms)
 Packet Loss:     0.0%
  Result URL: https://www.speedtest.net/result/c/a208e059-ddaf-488b-a138-cc3b03aa2de5

 

[xiaofan]

Another very good speed for TP-Link Archer BE805, 6GHz band.

Never get above 3.2gbps for BE805 for mine SD8 elite phone phone before.. Today test.. Wow.. What a surprise..

 

[Nakedtoes]

Another very good speed for TP-Link Archer BE805, 6GHz band.

Yes for firmware 1.3....now 1.3.1 I can't get anymore

 

[kappak]

Which Phone Has The Fastest Wi-Fi 7? | iPhone 16 Pro Max, Pixel 10 Pro XL, S25 Ultra & OnePlus 13​

 

[kappak]

Iphone 17 speedtest

 

[xiaofan]

Iphone 17 speedtest

Looks like iPhone 17 series mobile phones with the Apple N1 wireless networking chip still do not support 320 MHz channel bandwidth on the 6GHz band.

But the speed seems to be better than iPhone 16 series. It could be now 4096 QAM is supported, increasing the max PHY speed to 2882 Mbps (iPhone 16 series do not support 4096 QAM, only 1024 QAM).

Need to wait for Apple to update the following website. Now it only has WiFi spec data until iPhone 16 series.
https://support.apple.com/en-sg/guide/deployment/dep268652e6c/web

Wi-Fi specification details for iPhone models​

Wi-Fi specifications for the following iPhone models are detailed in the table below: iPhone 16, iPhone 16 Plus, iPhone 16 Pro, iPhone 16 Pro Max. These models also support Wi-Fi 7 in the 2.4 GHz, 5 GHz and 6 GHz bands, and Multi-Link Operation (MLO).

802.11 standard, name, frequency	Maximum PHY data rate	Maximum channel bandwidth	Maximum MCS index	Maximum spatial streams / Type
be@6 GHz	2400 Mbps	160MHz	11 (EHT)	2/MIMO
be@5 GHz	2400 Mbps	160MHz	11 (EHT)	2/MIMO
be@2.4 GHz	229 Mbps	20MHz	9 (EHT)	2/MIMO
ax@6 GHz	2400 Mbps	160MHz	11 (HE)	2/MIMO
ax@5GHz	2400 Mbps	160MHz	11 (HE)	2/MIMO
ac@5GHz	866 Mbps	80MHz	9 (VHT)	2/MIMO
a/n@5GHz	300 Mbps	40MHz	7 (HT)	2/MIMO
ax@2.4GHz	229 Mbps	20MHz	9 (HE)	2/MIMO
b/g/n@2.4GHz	144 Mbps	20MHz	7 (HT)	2/MIMO

 

[kimsix]

Looks like iPhone 17 series mobile phones with the Apple N1 wireless networking chip still do not support 320 MHz channel bandwidth on the 6GHz band.

But the speed seems to be better than iPhone 16 series. It could be now 4096 QAM is supported, increasing the max PHY speed to 2882 Mbps (iPhone 16 series do not support 4096 QAM, only 1024 QAM).

Need to wait for Apple to update the following website. Now it only has WiFi spec data until iPhone 16 series.
https://support.apple.com/en-sg/guide/deployment/dep268652e6c/web

iphone 17pm vs 15pm, both connect same 6ghz, stand right in front of eb810v

do you know if 16pm is faster than 15pm?

 

[kappak]

iphone 17pm vs 15pm, both connect same 6ghz, stand right in front of eb810v

do you know if 16pm is faster than 15pm?

16PM max about 1600Mbps.
You can watch speedtest youtube video 3 posts above.

 

[xiaofan]

https://www.macrumors.com/2025/09/13/apple-n1-chip-has-wi-fi-7-limitation/

According to FCC documents reviewed by MacRumors, the N1 chip in all of the new iPhone models supports up to 160 MHz channel bandwidth for Wi-Fi 7, short of the standard's 320 MHz maximum. This limitation means the devices cannot achieve the peak theoretical speeds possible with Wi-Fi 7.

 

[xiaofan]

This one is supposed to come to Singapore soon -- based on MediaTek MT7927 chipset. So so sure about pricing, for Desktop only.
https://www.tp-link.com/sg/home-networking/adapter/archer-tbe550e/
https://einfoldtech.com/2024/02/tp-link-archer-tbe550e-be9300-wifi-7-bluetooth-5-4-pcie-adapter/

Seems to be available now, at about S$89.

Price is just for reference, from a quick search from SIM LIM Square Price List, on 4-Oct-2025
Example: https://www.laser.com.sg/price.pdf

There are many cheaper MT7925 based WiFi 7 adapters from Chinese vendors. There are also a few cheaper USB WiFi 7 adapters from Chinese vendors (eg: Comfast and Fenvi).

TP-Link WiFi 7 adapters:
https://www.tp-link.com/sg/home-networking/all-adapter/

1. TBE550E --> WiFi 7, PCIe, BE9300, MT7927 chipset, about S$89
https://www.tp-link.com/sg/home-networking/adapter/archer-tbe550e/

6 GHz:​

11be: Up to 5760 Mbps(dynamic)​

11ax: Up t0 2402Mbps(dynamic)​

5 GHz:​

11be: Up to 2880 Mbps(dynamic)​

11ax: Up to 2402 Mbps(dynamic)​

2.4 GHz:​

11be: Up to 688 Mbps(dynamic)​

11ax: Up to 574 Mbps(dynamic)​

2. TBE400E --> WiFi 7, PCIe, BE6500, MT7925 chipset, about S$70. Price is on high side, cheaper to buy from Chinese vendors if you do not care about warranty.
https://www.tp-link.com/sg/home-networking/adapter/archer-tbe400e/

6 GHz:​

11be: Up to 2882 Mbps(dynamic)​

11ax: Up to 2402Mbps(dynamic)​

5 GHz:​

11be: Up to 2882 Mbps(dynamic)​

11ax: Up to 2402 Mbps(dynamic)​

2.4 GHz:​

11be: Up to 688 Mbps(dynamic)​

11ax: Up to 574 Mbps(dynamic)​

3. TBE400UH --> WiFi 7, USB, BE6500, high gain, about S$83, Realtek RTL8912U chipset, not recommended.
https://www.tp-link.com/sg/home-networking/adapter/archer-tbe400uh/

6 GHz:​

11be: Up to 2882 Mbps(dynamic)​

11ax: Up t0 2402Mbps(dynamic)​

5 GHz:​

11be: Up to 2882 Mbps(dynamic)​

11ax: Up to 2402 Mbps(dynamic)​

2.4 GHz:​

11be: Up to 688 Mbps(dynamic)​

11ax: Up to 574 Mbps(dynamic)​