Ask a Bicycle Question - Part 5

Status
Not open for further replies.

wind_blast942

Member
Joined
Feb 21, 2005
Messages
170
Reaction score
0
I used to ride this very bulky and slow bike; and now that it has broken down, I am thinking of looking into bikes with thinner wheels. Came across the Solo bike by bicycles.sg.

http://bicycles.sg/shop/solo-road-bicycle/

which is quite close to my budget. But my question is that is this a good bike for a beginner? Price wise is this good, or for this range there is a better model? Also is it good to get directly from the website?
 

Ratbag

Junior Member
Joined
Feb 21, 2010
Messages
19
Reaction score
0
Hi. Does anybody know where I can get a replacement for my damaged rear wheel in the North, Woodlands area? I've checked with Bikelink 2 and Rodalink at Woodlands 11 with no luck.

Last night after accompanying a friend home from our cycling trip to the Sembawang hot springs a taxi whacked into my rear wheel as I was slowly cycling across the zebra crossing. Luckily I only sustained a minor scratch on my knee when I fell but the rim on my rear wheel is totally bent out of shape.

I'm still using the stock wheelset for the Raleigh MV7 except for the tube and tyre. I believe it is a 20"/406 rim. Would it also be advisable to upgrade to a new 10 speed wheelset instead of finding a replacement for the current 7 speed?

Thanks in advance!
 
Last edited:

aerosmiths

Arch-Supremacy Member
Joined
Oct 2, 2008
Messages
11,093
Reaction score
2
anyone can recommend a bike shop in bukit panjang or any other place nearby. my grandma wheelchair the valve spoil cannot pump air, so the dealer online send me new tyre but need a bike shop to help me replace.

how much would labor cost to be considered reasonable? $50?
 

MIVEC525

High Supremacy Member
Joined
Feb 8, 2003
Messages
27,952
Reaction score
4,769
Hi. Does anybody know where I can get a replacement for my damaged rear wheel in the North, Woodlands area? I've checked with Bikelink 2 and Rodalink at Woodlands 11 with no luck.

Last night after accompanying a friend home from our cycling trip to the Sembawang hot springs a taxi clipped into my rear wheel as I was slowly cycling across the zebra crossing. Luckily I only sustained a minor scratch on my knee when I fell but the rim on my rear wheel is totally bent out of shape.

I'm still using the stock wheelset for the Raleigh MV7 except for the tube and tyre. I believe it is a 20"/406 rim. Would it also be advisable to upgrade to a new 10 speed wheelset instead of finding a replacement for the current 7 speed?

Thanks in advance!

https://www.facebook.com/pages/Cheap-John-Enterprise-SG/69676456945?fref=ts
 

Sadisticnoob

High Supremacy Member
Joined
Jun 12, 2006
Messages
39,855
Reaction score
1,834
anyone can recommend a bike shop in bukit panjang or any other place nearby. my grandma wheelchair the valve spoil cannot pump air, so the dealer online send me new tyre but need a bike shop to help me replace.

how much would labor cost to be considered reasonable? $50?
shouldnt cost more than $10
 

binary_0011

Supremacy Member
Joined
Nov 28, 2003
Messages
8,300
Reaction score
276
h Bikelink 2 and Rodalink at Woodlands 11 with no luck.

Last night after accompanying a friend home from our cycling trip to the Sembawang hot springs a taxi whacked into my rear wheel as I was slowly cycling across the zebra crossing. Luckily I only sustained a minor scratch on my knee when I fell but the rim on my rear wheel is totally bent out of shape.

are you able to claim from his insurance?
 

likehotbutter

Supremacy Member
Joined
Oct 20, 2010
Messages
5,798
Reaction score
819
Hi. Does anybody know where I can get a replacement for my damaged rear wheel in the North, Woodlands area? I've checked with Bikelink 2 and Rodalink at Woodlands 11 with no luck.

Last night after accompanying a friend home from our cycling trip to the Sembawang hot springs a taxi whacked into my rear wheel as I was slowly cycling across the zebra crossing. Luckily I only sustained a minor scratch on my knee when I fell but the rim on my rear wheel is totally bent out of shape.

I'm still using the stock wheelset for the Raleigh MV7 except for the tube and tyre. I believe it is a 20"/406 rim. Would it also be advisable to upgrade to a new 10 speed wheelset instead of finding a replacement for the current 7 speed?

Thanks in advance!

Glad that you're ok. Is the taxi going to bear responsibility for your repair?

You can remount your 7 speed sprocket on your new wheel. If not change to 10 speed u need to change group set.

Wheel can also check togoparts
 
Last edited:

BestPilot

Senior Member
Joined
Dec 1, 2012
Messages
2,038
Reaction score
3
My road bike brake lever banged into a wall and is very loose now. Any shops in the north area offers cheap repair or replacement?
 

Sadisticnoob

High Supremacy Member
Joined
Jun 12, 2006
Messages
39,855
Reaction score
1,834
Hi. Does anybody know where I can get a replacement for my damaged rear wheel in the North, Woodlands area? I've checked with Bikelink 2 and Rodalink at Woodlands 11 with no luck.

Last night after accompanying a friend home from our cycling trip to the Sembawang hot springs a taxi whacked into my rear wheel as I was slowly cycling across the zebra crossing. Luckily I only sustained a minor scratch on my knee when I fell but the rim on my rear wheel is totally bent out of shape.

I'm still using the stock wheelset for the Raleigh MV7 except for the tube and tyre. I believe it is a 20"/406 rim. Would it also be advisable to upgrade to a new 10 speed wheelset instead of finding a replacement for the current 7 speed?

Thanks in advance!

Can just get a 2nd hand wheel on Togo should be around 100 sgd or so

10 speed replacement will cost more than your bike new so you might wanna consider the cost benefit
 

aerosmiths

Arch-Supremacy Member
Joined
Oct 2, 2008
Messages
11,093
Reaction score
2
i also just bought a bike cheap cheap one just to test test. i realized it is extremely tiring to peddle it. as i struggle, i just see others zoom past me like nothing. is is because i really unfit or is there something wrong with the bike. its a foldable aleoca mountain bike.
 

rarenick

High Supremacy Member
Joined
Jul 12, 2008
Messages
26,307
Reaction score
3,732
i also just bought a bike cheap cheap one just to test test. i realized it is extremely tiring to peddle it. as i struggle, i just see others zoom past me like nothing. is is because i really unfit or is there something wrong with the bike. its a foldable aleoca mountain bike.
Those zoom passed you are using thin road tyres or mountain bike knobby tyres?

But since is edwmer, must be u bui bui hence slow.

Jokes aside, perhaps your bike body is too heavy, the brakes are rubbing against the rim, the saddle height is too low, or your gear is set too high.

Sent from Samsung SM-C115 using GAGT
 
Last edited:

aerosmiths

Arch-Supremacy Member
Joined
Oct 2, 2008
Messages
11,093
Reaction score
2
Those zoom passed you are using thin road tyres or mountain bike knobby tyres?

But since is edwmer, must be u bui bui hence slow.

Jokes aside, perhaps your bike body is too heavy, the brakes are rubbing against the rim, the saddle height is too low, or your gear is set too high.

Sent from Samsung SM-C115 using GAGT

must be because bui bui lol.

anyway, i did raise it to the highest, helps a bit, i then pump the tyres to 50PSI which is max for that tyre as observed on the side imprinted. this change made a big difference. no brakes was rubbing. the thing about the gear is i really don't know how to use, set too low or too high seems to be equally tiring.

those that zoom past me like relaxing pace are road bikes, thin tyre type. but the ones that shock me is when i see auntie riding those simple visit-market-buy-groceries bike faster than me, and they seem to be cruising at ease while i am panting, really really tiring.

could it just be the fact that the bike is super lousy or is it really me being unfit. just as a gauge, i can still pass IPPT.
 

rarenick

High Supremacy Member
Joined
Jul 12, 2008
Messages
26,307
Reaction score
3,732
must be because bui bui lol.

anyway, i did raise it to the highest, helps a bit, i then pump the tyres to 50PSI which is max for that tyre as observed on the side imprinted. this change made a big difference. no brakes was rubbing. the thing about the gear is i really don't know how to use, set too low or too high seems to be equally tiring.

those that zoom past me like relaxing pace are road bikes, thin tyre type. but the ones that shock me is when i see auntie riding those simple visit-market-buy-groceries bike faster than me, and they seem to be cruising at ease while i am panting, really really tiring.

could it just be the fact that the bike is super lousy or is it really me being unfit. just as a gauge, i can still pass IPPT.
U got GPS on your phone? Perhaps download some apps like runtastic to measure your highest as well as average speed. I ride on hardtail mtb clocking at 18km/hr for average speed and 25km/hr for highest speed. I'm considered slow.

Sent from Samsung SM-C115 using GAGT
 

iamlenon

High Supremacy Member
Joined
Jul 18, 2010
Messages
38,822
Reaction score
3
Hi. Does anybody know where I can get a replacement for my damaged rear wheel in the North, Woodlands area? I've checked with Bikelink 2 and Rodalink at Woodlands 11 with no luck.

Last night after accompanying a friend home from our cycling trip to the Sembawang hot springs a taxi whacked into my rear wheel as I was slowly cycling across the zebra crossing. Luckily I only sustained a minor scratch on my knee when I fell but the rim on my rear wheel is totally bent out of shape.

I'm still using the stock wheelset for the Raleigh MV7 except for the tube and tyre. I believe it is a 20"/406 rim. Would it also be advisable to upgrade to a new 10 speed wheelset instead of finding a replacement for the current 7 speed?

Thanks in advance!

glad u are not in bad shape
did the taxi stop to aid u?
rmb to claim damage fee from him
if looking for cheap alternative, can try 2nd hand stuff, look at togoparts, carousell
 

IronMac

Supremacy Member
Joined
Mar 25, 2012
Messages
9,006
Reaction score
11
must be because bui bui lol.

anyway, i did raise it to the highest, helps a bit, i then pump the tyres to 50PSI which is max for that tyre as observed on the side imprinted. this change made a big difference. no brakes was rubbing. the thing about the gear is i really don't know how to use, set too low or too high seems to be equally tiring.

those that zoom past me like relaxing pace are road bikes, thin tyre type. but the ones that shock me is when i see auntie riding those simple visit-market-buy-groceries bike faster than me, and they seem to be cruising at ease while i am panting, really really tiring.

could it just be the fact that the bike is super lousy or is it really me being unfit. just as a gauge, i can still pass IPPT.

IPPT tests different muscle groups. Your biking muscle groups are probably non-existent at the moment. Keep riding! :)
 
Status
Not open for further replies.
Important Forum Advisory Note
This forum is moderated by volunteer moderators who will react only to members' feedback on posts. Moderators are not employees or representatives of HWZ Forums. Forum members and moderators are responsible for their own posts. Please refer to our Community Guidelines and Standards and Terms and Conditions for more information.
Top