http://www.dabrim.com/html/products/cycling/rezzo.htm
Seen anyone in SG using this?
Sent from Samsung SM-C115 using GAGT
Seen anyone in SG using this?
Sent from Samsung SM-C115 using GAGT
Hi. Does anybody know where I can get a replacement for my damaged rear wheel in the North, Woodlands area? I've checked with Bikelink 2 and Rodalink at Woodlands 11 with no luck.
Last night after accompanying a friend home from our cycling trip to the Sembawang hot springs a taxi clipped into my rear wheel as I was slowly cycling across the zebra crossing. Luckily I only sustained a minor scratch on my knee when I fell but the rim on my rear wheel is totally bent out of shape.
I'm still using the stock wheelset for the Raleigh MV7 except for the tube and tyre. I believe it is a 20"/406 rim. Would it also be advisable to upgrade to a new 10 speed wheelset instead of finding a replacement for the current 7 speed?
Thanks in advance!
shouldnt cost more than $10anyone can recommend a bike shop in bukit panjang or any other place nearby. my grandma wheelchair the valve spoil cannot pump air, so the dealer online send me new tyre but need a bike shop to help me replace.
how much would labor cost to be considered reasonable? $50?
It's consider north east and pretty far away. Maybe try get from chain reaxtion
h Bikelink 2 and Rodalink at Woodlands 11 with no luck.
Last night after accompanying a friend home from our cycling trip to the Sembawang hot springs a taxi whacked into my rear wheel as I was slowly cycling across the zebra crossing. Luckily I only sustained a minor scratch on my knee when I fell but the rim on my rear wheel is totally bent out of shape.
Hi. Does anybody know where I can get a replacement for my damaged rear wheel in the North, Woodlands area? I've checked with Bikelink 2 and Rodalink at Woodlands 11 with no luck.
Last night after accompanying a friend home from our cycling trip to the Sembawang hot springs a taxi whacked into my rear wheel as I was slowly cycling across the zebra crossing. Luckily I only sustained a minor scratch on my knee when I fell but the rim on my rear wheel is totally bent out of shape.
I'm still using the stock wheelset for the Raleigh MV7 except for the tube and tyre. I believe it is a 20"/406 rim. Would it also be advisable to upgrade to a new 10 speed wheelset instead of finding a replacement for the current 7 speed?
Thanks in advance!
My road bike brake lever banged into a wall and is very loose now. Any shops in the north area offers cheap repair or replacement?
Hi. Does anybody know where I can get a replacement for my damaged rear wheel in the North, Woodlands area? I've checked with Bikelink 2 and Rodalink at Woodlands 11 with no luck.
Last night after accompanying a friend home from our cycling trip to the Sembawang hot springs a taxi whacked into my rear wheel as I was slowly cycling across the zebra crossing. Luckily I only sustained a minor scratch on my knee when I fell but the rim on my rear wheel is totally bent out of shape.
I'm still using the stock wheelset for the Raleigh MV7 except for the tube and tyre. I believe it is a 20"/406 rim. Would it also be advisable to upgrade to a new 10 speed wheelset instead of finding a replacement for the current 7 speed?
Thanks in advance!
Those zoom passed you are using thin road tyres or mountain bike knobby tyres?i also just bought a bike cheap cheap one just to test test. i realized it is extremely tiring to peddle it. as i struggle, i just see others zoom past me like nothing. is is because i really unfit or is there something wrong with the bike. its a foldable aleoca mountain bike.
Those zoom passed you are using thin road tyres or mountain bike knobby tyres?
But since is edwmer, must be u bui bui hence slow.
Jokes aside, perhaps your bike body is too heavy, the brakes are rubbing against the rim, the saddle height is too low, or your gear is set too high.
Sent from Samsung SM-C115 using GAGT
foldable aleoca mountain bike.
U got GPS on your phone? Perhaps download some apps like runtastic to measure your highest as well as average speed. I ride on hardtail mtb clocking at 18km/hr for average speed and 25km/hr for highest speed. I'm considered slow.must be because bui bui lol.
anyway, i did raise it to the highest, helps a bit, i then pump the tyres to 50PSI which is max for that tyre as observed on the side imprinted. this change made a big difference. no brakes was rubbing. the thing about the gear is i really don't know how to use, set too low or too high seems to be equally tiring.
those that zoom past me like relaxing pace are road bikes, thin tyre type. but the ones that shock me is when i see auntie riding those simple visit-market-buy-groceries bike faster than me, and they seem to be cruising at ease while i am panting, really really tiring.
could it just be the fact that the bike is super lousy or is it really me being unfit. just as a gauge, i can still pass IPPT.
Hi. Does anybody know where I can get a replacement for my damaged rear wheel in the North, Woodlands area? I've checked with Bikelink 2 and Rodalink at Woodlands 11 with no luck.
Last night after accompanying a friend home from our cycling trip to the Sembawang hot springs a taxi whacked into my rear wheel as I was slowly cycling across the zebra crossing. Luckily I only sustained a minor scratch on my knee when I fell but the rim on my rear wheel is totally bent out of shape.
I'm still using the stock wheelset for the Raleigh MV7 except for the tube and tyre. I believe it is a 20"/406 rim. Would it also be advisable to upgrade to a new 10 speed wheelset instead of finding a replacement for the current 7 speed?
Thanks in advance!
must be because bui bui lol.
anyway, i did raise it to the highest, helps a bit, i then pump the tyres to 50PSI which is max for that tyre as observed on the side imprinted. this change made a big difference. no brakes was rubbing. the thing about the gear is i really don't know how to use, set too low or too high seems to be equally tiring.
those that zoom past me like relaxing pace are road bikes, thin tyre type. but the ones that shock me is when i see auntie riding those simple visit-market-buy-groceries bike faster than me, and they seem to be cruising at ease while i am panting, really really tiring.
could it just be the fact that the bike is super lousy or is it really me being unfit. just as a gauge, i can still pass IPPT.