Black screen on boot

twinbaby

Supremacy Member
Joined
Jul 8, 2014
Messages
5,466
Reaction score
1,534
Yesterday, I have bsod, startup repair loop.

Now it has progress to cannot enter bios and now it is black screen already
 

evq

Arch-Supremacy Member
Joined
Jan 29, 2001
Messages
15,333
Reaction score
212
Is there a cursor blinking during black screen?
 

evq

Arch-Supremacy Member
Joined
Jan 29, 2001
Messages
15,333
Reaction score
212
Don't even have cursor

Now just progress to cannot detect display

If no signal to display, likely gpu problem. U have to verify if this. Swap the display cable first, just in case.
 

twinbaby

Supremacy Member
Joined
Jul 8, 2014
Messages
5,466
Reaction score
1,534
If no signal to display, likely gpu problem. U have to verify if this. Swap the display cable first, just in case.

Cannot be GPU.
I swap with another GPU and another card already
After which I swap with another cable already
 

twinbaby

Supremacy Member
Joined
Jul 8, 2014
Messages
5,466
Reaction score
1,534
Yesterday, I have bsod, startup repair loop.

Now it has progress to cannot enter bios and now it is black screen already

I have already tried replacing the CMOS battery, reseating the ram

The keyboard and mouse lights up but the issue still the same
 

MasterChief86

Member
Joined
Nov 25, 2016
Messages
134
Reaction score
0
I have already tried replacing the CMOS battery, reseating the ram

The keyboard and mouse lights up but the issue still the same

If it's not the ram, it's likely your cpu/gpu. run the system without your external gpu, see if that triggers the boot. if it doesn't, it's highly likely the problem is with your motherboard.
 

twinbaby

Supremacy Member
Joined
Jul 8, 2014
Messages
5,466
Reaction score
1,534
If it's not the ram, it's likely your cpu/gpu. run the system without your external gpu, see if that triggers the boot. if it doesn't, it's highly likely the problem is with your motherboard.


I don't hae any external GPU. How is it possible for me o test the mother board for failure now.
 

hlots123

Supremacy Member
Joined
Apr 5, 2006
Messages
5,207
Reaction score
11
usually it beep when ok? try disconnect all sata cable & usb then
try remove all ram & gpu - power on got error beep?

rub clean the rams' golden area with soft eraser, put 1 stick ram back in
error beep got change pattern?
 

twinbaby

Supremacy Member
Joined
Jul 8, 2014
Messages
5,466
Reaction score
1,534
usually it beep when ok? try disconnect all sata cable & usb then
try remove all ram & gpu - power on got error beep?

rub clean the rams' golden area with soft eraser, put 1 stick ram back in
error beep got change pattern?

Ram and GPU all removed.
 

twinbaby

Supremacy Member
Joined
Jul 8, 2014
Messages
5,466
Reaction score
1,534
usually it beep when ok? try disconnect all sata cable & usb then
try remove all ram & gpu - power on got error beep?

rub clean the rams' golden area with soft eraser, put 1 stick ram back in
error beep got change pattern?

Ram and GPU all removed.
Plug back in.

Ram only insert one problem still the same
 

hlots123

Supremacy Member
Joined
Apr 5, 2006
Messages
5,207
Reaction score
11
if it used to beep when working,
then now got power but no beeps at all with ram & gpu removed, even when swap to known good psu
i suspect cud be mb...
 

hawthorne

Arch-Supremacy Member
Joined
May 9, 2006
Messages
11,714
Reaction score
210
Yes. Likely motherboard. If u remove everything except processor, the motherboard will have continuous discrete beeps to signify no ram. If that also dun have means Mobo problem

Of course u must plug in a buzzer in the speaker lead
 
Important Forum Advisory Note
This forum is moderated by volunteer moderators who will react only to members' feedback on posts. Moderators are not employees or representatives of HWZ Forums. Forum members and moderators are responsible for their own posts. Please refer to our Community Guidelines and Standards and Terms and Conditions for more information.
Top