Is there a cursor blinking during black screen?
Don't even have cursor
Now just progress to cannot detect display
If no signal to display, likely gpu problem. U have to verify if this. Swap the display cable first, just in case.
Yesterday, I have bsod, startup repair loop.
Now it has progress to cannot enter bios and now it is black screen already
I have already tried replacing the CMOS battery, reseating the ram
The keyboard and mouse lights up but the issue still the same
If it's not the ram, it's likely your cpu/gpu. run the system without your external gpu, see if that triggers the boot. if it doesn't, it's highly likely the problem is with your motherboard.
u hav spare psu to test...?
Yes i already tested with the spare pay already, taken from another mobo
I don't hae any external GPU. How is it possible for me o test the mother board for failure now.
usually it beep when ok? try disconnect all sata cable & usb then
try remove all ram & gpu - power on got error beep?
rub clean the rams' golden area with soft eraser, put 1 stick ram back in
error beep got change pattern?
usually it beep when ok? try disconnect all sata cable & usb then
try remove all ram & gpu - power on got error beep?
rub clean the rams' golden area with soft eraser, put 1 stick ram back in
error beep got change pattern?