[Build Log] Project X

[gaoxing84]

will post better pics when running leak test soon!
now lazy use iphone take

 

[shadow84]

lol got enough space to close.
its facing down cause the thing is too heavy, the rotary cannot take the weight and got weigh down. LOL.
unless i glue it or something.

Your rotary might b spoil sia.. im also using straight rotary connected to Q rotary amd ball valve. Does not get weigh down.... better check that area as well.

 

[gaoxing84]

Your rotary might b spoil sia.. im also using straight rotary connected to Q rotary amd ball valve. Does not get weigh down.... better check that area as well.

OK leh. It's a angled rotary. And I doubt any rotary can hold the weight of a male to male 5cm, ball valve and a stop plug.
It's pretty heavy.

 

[gaoxing84]

Phase 2! No leaks! pray!!

 

[shadow84]

Congrats !!! Time to let it run for a few hours before using your com....

BTW, is that coolant or distilled?

 

[mr_voodoo]

Congrats !!! Time to let it run for a few hours before using your com....

BTW, is that coolant or distilled?

distilled for leak test

 

[gaoxing84]

Congrats !!! Time to let it run for a few hours before using your com....

BTW, is that coolant or distilled?

ran since 10pm till morning 8am. haha no leaks.
i am a happy man.
next, blitz pro 2 to do some clean up!

distilled! haha

 

[royfrosty]

Congrats. Nice setup!

Btw do you still have some 30 deg angle black barrow fittings?

 

[jedi5diah]

please release your Masterpiece photoshots!

 

[gaoxing84]

Congrats. Nice setup!

Btw do you still have some 30 deg angle black barrow fittings?

don't have leh. haha you want link to buy bo? taobao have

please release your Masterpiece photoshots!

haha soon soon. i haven't use the part 2 of blitz pro yet. busy at work

 

[royfrosty]

Send me through whatsapp!!!

 

[gaoxing84]

Send me through whatsapp!!!

mai la. haha the link in my com. haha pm you!

 

[gaoxing84]

sorry no pics now, nothing much now also. haha

now running blitz pro 2. just to ensure its clean before i add my mayhem pastel.
24 hours running!

tested LED strips made by roy for me. (thanks buddy!)
one of the strip broke off sad. haha lucky still got 2 more strips.

the new white LED is bright as well. but after 1 - 2 years need change cause the LED will kinda die off.

when its all done, time to mount the HDD, SSD, the cabling and the led strips.

then it will be done!

 

[gaoxing84]

cable management is hell when space is limited and your hands are big.
I thought 750D was big but boy I was damn wrong.
Best I can do with cable combs I got off taobao.
Really need to use caselab next time hahahaha

 

[XB]

May I ask what size of acrylic tube ur using?? and the respective size of the barrow fitting u bought.

I am about the embark on similar journey for my Corsair Carbide Series Air 540.

Ur advise will help me alot.

Thanks

 

[gaoxing84]

May I ask what size of acrylic tube ur using?? and the respective size of the barrow fitting u bought.

I am about the embark on similar journey for my Corsair Carbide Series Air 540.

Ur advise will help me alot.

Thanks

hi you can see the front page of what i used.
i am using ID 10 OD 14
Follow the tube sizing and buy barrows lor
i have a few fixed 90 deg angle, if you want can pm me .

 

[gaoxing84]

Sneak Peek

 

[gaoxing84]

so project ended. haha what's next?

btw is running at 30 deg idle, max 38 good temps?

realised the SP140L is darn noisy. gotta live with it. unless use a step down regulator

 

[gaoxing84]

Hooted a 4pin fan extension cable from taobao.
Route my bottom swifttech fan hub up to my cpu fan header 2.
The bios for msi sys fan header min fan speed is 50% but the fan is spinning full. Damn noisy. 4 fans spinning at full.
2 high performance sp120 and 2 af140L

Let's see if it works, if not need to replace the front intake fans to 120mm pwm high performance fans.

I think need download aida64 to test my system. I think my ram is quite chui. Oc to 1866 but kinda unstable.

Idle cpu temp 30-38
Max load temp not crossing 70 most of the time. Shall try.

Haven't got chance to load the gpu.
Lol lazy to oc. Just gonna go with stock. Unless have extra time on hand. Nvidia block the voltage control.

 

[gaoxing84]

did aida64 cpu stress. the result is pretty amazing. hahaha
never go over 70!