Dark rock pro 4 mounting

AnTiLooP

Supremacy Member
Joined
Jan 1, 2000
Messages
6,225
Reaction score
85
I have just mounted the cooler on, and it wiggles side to side a little, maybe 1 to 1.5mm ??. Don't think i got the installation wrong though.. it's pretty straight forward for am4.

Anyone else noticing the same ?
 

AnTiLooP

Supremacy Member
Joined
Jan 1, 2000
Messages
6,225
Reaction score
85
Mount pressure. With good thermal grease a little wiggle is possible and normal. What really matters is the pressure and contact area between hsf and CPU

OIC. ok.. temps seem hot and my fans are blaring.... but prollly cause i havent set anything up in bios.. doing it now.. haha
 

_DeS__

Senior Member
Joined
Mar 22, 2005
Messages
1,650
Reaction score
22
I have just mounted the cooler on, and it wiggles side to side a little, maybe 1 to 1.5mm ??. Don't think i got the installation wrong though.. it's pretty straight forward for am4.

Anyone else noticing the same ?

Did u use the washers provided? If yes u might want to remove them.
 

AnTiLooP

Supremacy Member
Joined
Jan 1, 2000
Messages
6,225
Reaction score
85
Did u use the washers provided? If yes u might want to remove them.

No. Am3 needs am4 doesn't I know that.

@ragnarok - not hot hot... But hotter than my 7700k for sure.

Anyway the fans damn irritating... Something not right somewhere.
 

Proximus

Supremacy Member
Joined
May 21, 2001
Messages
7,004
Reaction score
93
Anyway the fans damn irritating... Something not right somewhere.

They suppose to be at 24.3dB(A) at maximum fan speed as stated at website. Unless that is unbearable to you but it seems quiet to me..
 

_DeS__

Senior Member
Joined
Mar 22, 2005
Messages
1,650
Reaction score
22
No. Am3 needs am4 doesn't I know that.

@ragnarok - not hot hot... But hotter than my 7700k for sure.

Anyway the fans damn irritating... Something not right somewhere.

should not wiggle, mine is solid tight.
 

AnTiLooP

Supremacy Member
Joined
Jan 1, 2000
Messages
6,225
Reaction score
85
should not wiggle, mine is solid tight.

What board and cpu combo are you using?

Ragna - temps in max heat prime 95, case closed now is around 76C average. Been running for like 20 minutes now. Room ambient is around 30-31C. Earlier when i did cinebench, it went up to 65-70c thereabouts.

In windows idling, no idea why the processor doesn't throttle much, temps are around 45-50C (excluding spikes here and there).

I havent played with any bios settings yet aside from RAM and fan.

are those temps ok?
 

Proximus

Supremacy Member
Joined
May 21, 2001
Messages
7,004
Reaction score
93
What board and cpu combo are you using?

Ragna - temps in max heat prime 95, case closed now is around 76C average. Been running for like 20 minutes now. Room ambient is around 30-31C. Earlier when i did cinebench, it went up to 65-70c thereabouts.

In windows idling, no idea why the processor doesn't throttle much, temps are around 45-50C (excluding spikes here and there).

I havent played with any bios settings yet aside from RAM and fan.

are those temps ok?

Your temps are OK. I assumed that you have PBO enabled?
 

Rashkae

Arch-Supremacy Member
Joined
Sep 24, 2004
Messages
22,372
Reaction score
80
What board and cpu combo are you using?

Ragna - temps in max heat prime 95, case closed now is around 76C average. Been running for like 20 minutes now. Room ambient is around 30-31C. Earlier when i did cinebench, it went up to 65-70c thereabouts.

In windows idling, no idea why the processor doesn't throttle much, temps are around 45-50C (excluding spikes here and there).

I havent played with any bios settings yet aside from RAM and fan.

are those temps ok?

Oh. Those temps are very good. Make sure:

1. You have the latest BIOS
2. Try to update to Windows 2004
3. You have the Ryzen chipset drivers installed and the Ryzen Balanced power plan enabled.

On my system, with 24c Aircon, I can idle at 25c average.
 

Rashkae

Arch-Supremacy Member
Joined
Sep 24, 2004
Messages
22,372
Reaction score
80
Also, watch out for background apps like RGB apps etc. They can keep your CPU awake.
 

AnTiLooP

Supremacy Member
Joined
Jan 1, 2000
Messages
6,225
Reaction score
85
Oh. Those temps are very good. Make sure:

1. You have the latest BIOS
2. Try to update to Windows 2004
3. You have the Ryzen chipset drivers installed and the Ryzen Balanced power plan enabled.

On my system, with 24c Aircon, I can idle at 25c average.

all of the above has been done. by the way which is the temperature gauge which everyone is using?

Hwinfo reports several, (tcl, ccd1 and 2, average). While Ryzen master reports lower than all but similar to HWinfo's CPU DIE Average.
 

kimsix

Arch-Supremacy Member
Joined
Jan 6, 2009
Messages
20,298
Reaction score
10,165
this dark rock uses bar spreader, can wiggle a bit left right, but not up is ok bah.

I dont use ryzen master, just hwinfo less clutter, and look at 'amd ryzen xxx-enchanced' section. ccd1 ccd2, sv12 etc. those readings from cpu.

while the ITE ITxxx section are external sensors, not as accurate i guess :o
 

AnTiLooP

Supremacy Member
Joined
Jan 1, 2000
Messages
6,225
Reaction score
85
this dark rock uses bar spreader, can wiggle a bit left right, but not up is ok bah.

I dont use ryzen master, just hwinfo less clutter, and look at 'amd ryzen xxx-enchanced' section. ccd1 ccd2, sv12 etc. those readings from cpu.

while the ITE ITxxx section are external sensors, not as accurate i guess :o

Yeah it's not up or lifting. Just wiggle left or right...

Anyway I dunno man, my temps like not very good. Cinebench 20min passes 80-82c, some times spike beyond 85 but never hit 90c. I think pbo is enabled by default cause I see the wattage drawn is over 105tdp. Should I disable it ? At the same time reseat and reapply paste ?
 
Important Forum Advisory Note
This forum is moderated by volunteer moderators who will react only to members' feedback on posts. Moderators are not employees or representatives of HWZ Forums. Forum members and moderators are responsible for their own posts. Please refer to our Community Guidelines and Standards and Terms and Conditions for more information.
Top