desktop shutdown

[whoooo]

desktop shutdown - MB spoilt need recommendations

Hi Experts;

need some opinion, my DIY desktop this week start to shutdown/restart by itself, sometime it will be ok sometime will ki-siao just restart.

I have done the following and also symptoms;

* no beeping sound indicating RAM error
* no matter it is idle or surfing web using chrome it will sometime restart
* I use the command prompt and check HDD using CIM command it says status ok
* Boot into CMOS mode and leave it there it will also have the restart symptoms (rule out HDD and Wins10 issue)
* CPU fans and all fan are turning when the desktop are ok
* when the symptoms kick it, when total power off and on , can see all the fans turns stop turn stop, (fans meanings all 6 casing fans and CPU fans)

I check event viewer it says kernel power error

Is it motherboard or power supply issue? Any good guess base on the above?

Specs of desktop as below ;

TP67B+ motherboard with I5- 2400 core
1 x 4 gb RAM
FSP 400w PSU
HD5850 Xtreme 1gb graphic card
Samsung 1TB Sata HDD
Windows 10

Thanks for any help or tips.

 

[ZrE0_Cha0s]

if u can do a paper clip test for ur psu. to test and see. if u can google how to do it.

 

[whoooo]

if u can do a paper clip test for ur psu. to test and see. if u can google how to do it.

ok just google it, thanks man. even if intermittent issue it can also detect using this method?

 

[ZrE0_Cha0s]

ok just google it, thanks man. even if intermittent issue it can also detect using this method?

well yes. but still it will be better if u got the time to test with a spare psu (if u have) else send down for RMA (if it still on warranty)

 

[ChaosDingo]

I was troubleshooting my PSU as well just recently, both personally and sending it down to Corbell.

DIY - just download HWinfo and see your 5v 12v and your 3.3v make sure it's stable. Alternatively you can use a multimeter if you know how. much more accurate.

If everything looks good, monitor the voltage while doing some burn-in test, either using prime95 or Sisoftware Sandra.

That's what the Corbell guy did as well when I went there.

Lastly, check your cables too, mine seems to be the cables as they couldn't find any issues with the PSU but were nice enough to replace the cables for me, after which everything asp normal liew.

 

[whoooo]

I was troubleshooting my PSU as well just recently, both personally and sending it down to Corbell.

DIY - just download HWinfo and see your 5v 12v and your 3.3v make sure it's stable. Alternatively you can use a multimeter if you know how. much more accurate.

If everything looks good, monitor the voltage while doing some burn-in test, either using prime95 or Sisoftware Sandra.

That's what the Corbell guy did as well when I went there.

Lastly, check your cables too, mine seems to be the cables as they couldn't find any issues with the PSU but were nice enough to replace the cables for me, after which everything asp normal liew.

Firstly thanks bro, the problem is the desktop now suka suka just shutdown. Even if install hwinfo run also cant see as shutdown lol, ask u what readings consider unstable for 12v 5v and 3.3v i know my 12v only hits 11.94v , 5.5v i gotten 5.1v

 

[ZrE0_Cha0s]

Firstly thanks bro, the problem is the desktop now suka suka just shutdown. Even if install hwinfo run also cant see as shutdown lol, ask u what readings consider unstable for 12v 5v and 3.3v i know my 12v only hits 11.94v , 5.5v i gotten 5.1v

12v : 11.94
5.5v : 5.1
3.3v : ???

Overall it seems fine though. but i aint sure the actual good range specs.

 

[whoooo]

12v : 11.94
5.5v : 5.1
3.3v : ???

Overall it seems fine though. but i aint sure the actual good range specs.

Cant find 3.3v listing

 

[whoooo]

bump my thread. bought a new PSU and change it and still same problem shld be MB up lorry liao ...any1 got good recommendation for motherboard + CPU + ram since I was told my DDR3 ram no use in the new motherboard Budget <$400

most impt i want to use back to HD5850 Xtreme 1gb graphic card can?

 

[ZrE0_Cha0s]

bump my thread. bought a new PSU and change it and still same problem shld be MB up lorry liao ...any1 got good recommendation for motherboard + CPU + ram since I was told my DDR3 ram no use in the new motherboard Budget <$400

most impt i want to use back to HD5850 Xtreme 1gb graphic card can?

can u tell us ur spoil Mobo and the casing, so we can get u the right size mobo to fit your casing as well.

and if u want we can choose a mobo to use back ddr3. but if not den we get u a skylake Mobo+cpu

dun wry u can use back your GPU.

 

[whoooo]

can u tell us ur spoil Mobo and the casing, so we can get u the right size mobo to fit your casing as well.

and if u want we can choose a mobo to use back ddr3. but if not den we get u a skylake Mobo+cpu

dun wry u can use back your GPU.

casing is CiT Vantage PC Case Black http://www.maplin.co.uk/p/cit-vantage-pc-case-black-a85ky while the spoil motheboard is BioStar TP67B+. RAM buy new is ok since 8gb is dirt cheap now lol

 

[ZrE0_Cha0s]

casing is CiT Vantage PC Case Black http://www.maplin.co.uk/p/cit-vantage-pc-case-black-a85ky while the spoil motheboard is BioStar TP67B+. RAM buy new is ok since 8gb is dirt cheap now lol

well base on ur casing and mobo its seems u can fit ATX Mobo. but im giving u a mATX(maybe ATX) mobo

MSI B150m BAZOOKA + i5 6400 @385
Kingston DDR4 8GB ram @48

Total: $433

prices quote from tradpac.
not sure if u are alright with it?

 

[whoooo]

well base on ur casing and mobo its seems u can fit ATX Mobo. but im giving u a mATX(maybe ATX) mobo

MSI B150m BAZOOKA + i5 6400 @385
Kingston DDR4 8GB ram @48

Total: $433

prices quote from tradpac.
not sure if u are alright with it?

wah abit high lol. later i go tradpac look see look see on pricing

 

[ZrE0_Cha0s]

wah abit high lol. later i go tradpac look see look see on pricing

Well I have compare among a few shops (Fuwell, PCT), they all are way above than tradepac. If not bargain with them lol

 

[whoooo]

Well I have compare among a few shops (Fuwell, PCT), they all are way above than tradepac. If not bargain with them lol

just check it was moneyface who help me on my rig lol in 2011!!! later go ask him . thanks bro

tradepac ah nie very friendly when i drop by yesterday ask ask.

 

[MoneyFace =p]

TS maybe you wanna try using your PC without the HD 5850?

 

[whoooo]

U suspect the Graphic card? Sometime the system will beep 8 or 9 times. Need to see if i can link the board to the monitor