DNS-323 Network Storage

[AT]

Hi All,

I would like to take out my 1.5TB HDD from the DNS-323 and clone it to another new HDD using a regular PC via Acroinis software. Would I have problems ?

After the clone is done I will want to install the newly clone disk back to the NAS and use it, possible?

TIA

Cheers

 

[Palmster]

I read on the net that Seagate 1.5TB 7200.11 Barracuda has a problem working with Dlink DNS-323. Some lag issue. Anyone has this problem still? I'm hoping to use that HD which I bought last year for a new purhase on an Dlink 323.

Hope to hear any feedback specific to this HD. Thanks!

 

[Errz]

my DNS-323 spoil (no more warranty). was running on Raid 1 (mirror). anyway to access the drive?

 

[MarineX]

my DNS-323 spoil (no more warranty). was running on Raid 1 (mirror). anyway to access the drive?

can, plug into your PC... use ext2fsd

 

[gbjack]

my DNS-323 spoil (no more warranty). was running on Raid 1 (mirror). anyway to access the drive?

What is your product lifespan? NAS are suppose build to last

 

[rubbadubbaducky!]

hi guys, whats your average copying speed from laptop to NAS?
im copying 28gb worth of files and the speed is only 500mb+/sec. problem lies with my network?

 

[angcsbenny]

hi guys, whats your average copying speed from laptop to NAS?
im copying 28gb worth of files and the speed is only 500mb+/sec. problem lies with my network?

500mb+/ sec ? u using ssd in ur nas ?

 

[MarineX]

500mb+/ sec ? u using ssd in ur nas ?

problem is... 323 can hit that speed or not. lol

 

[OKK77]

500mb+/ sec ? u using ssd in ur nas ?

Even if it is 500Mbps and not 500MB/s, it is still

 

[angcsbenny]

haha true.. dun even think theres much ssd if any at all that can write 500mb/s

 

[rubbadubbaducky!]

fwah.
just came home, and checked that my 28gb finally finished transfering @ 1mb+/s

BTW, my bad. last night it was 500kb/s lol.

anyway from the manual, it was stated RAID 0 (Stripping - Best Performance)
so by using RAID 0, transfer speed would be better? im currently using Standard.

 

[sk37]

Hi all,

I have a problem here, i cant ftp with my dlink dns 323 from outside of my network. I am using 1.08 firmware. My fren is able to connect his 1.07 firmware. So the different between the 1.08 and 1.07 is the Passive mode option, and SSL/TLS (1.07 dun have this two). what setting should i choose for my passive mode option, and what is the port range. I have my default port 21 forward in my dlink router (model: dsl 2640T). anything i have miss out. pls advise.... I have a hard time trying to figure out what's went wrong.

Thanks alot.....

 

[gbjack]

Using wireless will slow the speed even more. You want more speed have to get better NAS that cost more.

 

[treecom]

V1.09 firmware is out.

ftp://ftp.dlink.com/Multimedia/dns323/Firmware/

 

[tnk001]

V1.09 firmware is out.

ftp://ftp.dlink.com/Multimedia/dns323/Firmware/

What are the changes?

 

[cochran]

will like to know the changes too.

 

[tekster]

wanna ask, is it easy to update firmware? can it be done wirelessly? if not, what ways do i have to update the dns-323 nas?

 

[tnk001]

Highly not recommended to use wireless to update...

 

[Rogue]

What are the changes?

I post for year 2010....

Firmware: 1.09
Date: 06/16/10

1. Support CTERA Online Backup.

Note: Basically... allow an external company to "backup" your data on dns-323 using cloud computing through internet. Free Trial, but need to pay afterward

Here's the press release : http://it.tmcnet.com/news/2010/06/16/4850486.htm


*********
Firmware: 1.08
Date: 02/17/10

1. Now supports 2TB Disks.
2. Add Scandisk support.
3. Add Support for EXT3.
4. Supports D-Link’s DNS-323 Yahoo! Widget. Check out your BT downloads right from your desktop!
5. New applications can be modulized and be installed to disk using APKG.
6. Support for Bonjour added via APKG modules.
7. Support for NFS (as a server) added via APKG modules.
8. Support System Logging/FTP Logging.
9. Bugfix: Unable to save the modified word/excel file which already in device through Samba.
10. Bugfix: when upgrading from a older f/w to the latest v1.08 f/w, the FAN run in high speed continually.
11. Email Alerts: Extends the Sender´s address limitation to 63 characters.
12. Email Alerts: Can now send email notification when BT is done downloading.
13. Email Alerts: Can now send email when the raid is put in degrade mode.
14. Email Alerts: Now Capable of sending logs by email.
15. Email Setup: Add the ability to manually configure your SMTP mail server port.
16 FTP Server: Now supports Hebrew codepage.
17. FTP Server: Now supports FXP transfers.
18 FTP Server: Add the ability to specify Passive port ranges for FTP.
19. FTP Server: Add the ability to set the FTP server to ONLY accept SSL/TLS connections and reject regular non-authenticated connections.
20. Users can now assign a shared folder for storing BT´s torrents.
21. UPnP AV Server: Now supports streaming the following file extensions: WAV, OGG, FLAC, MKV, APE, IFO, ISO, AAC, DIVX, M4A, M2TS, ISO
22. UPnP AV Server: Now able to handle spaces in file names.
23. UPnP AV Server: Now able to handle long file names.
24. UPnP AV Server: If it runs across a corrupt file then it just skip´s it instead of stopping the scan all together.
25. iTunes Server: iTunes Server is now capable of indexing more than 50,000 songs.
26. ITunes Server: Ability Replace existing iTunes server (mt-daapd) with new released software, Firefly by APKG module..
27. BitTorrent: BT can be uninstalled if it is installed via APKG.
28. Quota setting are now saved to the Configuration file.
29. DDNS: Add support for no-ip via APKG module.
30. Improved DST GUI design.
31. Disk formatting error codes are now given to help troubleshoot.
32. Ability to control the devices LED status of ON or OFF to minimize the amount of blue ‘radiance’ generated by your DNS-323.
33. Add the ability to turn off the hard drive after more than 30 minutes (1 hour, 2 hours, etc.) in Power Management Settings.
34. Status Page: More In-depth Network information on status page, (Current Rx/Tx, Day/Week/Month etc., Device Uptime).
35. Samba Share mode and User mode auto switching to fix Vista login issue.
36. Support Auto Power Recovery (For HW C1 only).
37. The following items have had Help information added on the GUI:
FTP Server->Passive Mode,SSL/TSL.
Time->Daylight Saving Dates(DST Start,DST End).
System->Power LED CONTROL.
POWER MANAGEMENT->FAN CONTROL.
38. GUI has the ability to enable HTTPS (SSL) access only instead of allowing HTTP/S access by default.
39. Normal to Raid1: Creates a new volume for the remaining disk space after creating the Raid partition.
40. PHYSICAL DISK INFO: Now shows "L"--Left or "R"--Right instead of "1" or "2".
41. Shut off fan at desired temp (ability to check always on low, Add always on).
42. Applications: Scheduled downloads URL limit increased to 235 characters (up from 120).
43. Applications: Scheduled downloads now has Ajax Download bar similar to BT Page (no refresh required).

 

[ckman3]

Hi, currently using one HDD in DNS-323. By adding another HDD of same capacity and changing to RAID1, do I need to reformat all HDDs or just the new HDD alone. Appreciate advice. TIA.