[HELP] New Rig Error

[LIN_JOEL]

Using thumb drive to install Win 8.1 pro but error detect as corrupted software.
My new Rig sometimes can Post Bios, most of the time just light & fans running but never post Bios. Just blank...

Please advise how do I troubleshoot
Thank U

I5 6600K
Asrock Z170 Gaming ITX
Corsair LPX 2* 8GB
Samsung 850 EVO 1TB
Silverstone Sfx 600w
Corsair H100i GTX

 

[mib500]

Using thumb drive to install Win 8.1 pro but error detect as corrupted software.
My new Rig sometimes can Post Bios, most of the time just light & fans running but never post Bios. Just blank...

Please advise how do I troubleshoot
Thank U

I5 6600K
Asrock Z170 Gaming ITX
Corsair LPX 2* 8GB
Samsung 850 EVO 1TB
Silverstone Sfx 600w
Corsair H100i GTX

you try to reinstall again??

 

[Phen8210]

try to resit rams, normally if my pc get everyth running but no post its my ram.. really need resit many time dk y =.=..

 

[zenniz]

Is this the scenario that you encountered?

1) Power on desktop.
2) Desktop's led, fan, and everything is running as per normal.
3) Monitor did not receive any signal.

Question. Do you have any graphic card?

 

[LIN_JOEL]

I had tried reinstall n delete previous partition that left behind after installation failed.
Still cannot and I had re download the OS.

The biggest problem I facing is booting of bios, maybe 2 out of 10times is successful.
Everything is detected if I able to boot and the temp of cpu ard 3x to low 40s.
While ram at 2133 instead of 2666mhz

 

[LIN_JOEL]

Is this the scenario that you encountered?

1) Power on desktop.
2) Desktop's led, fan, and everything is running as per normal.
3) Monitor did not receive any signal.

Question. Do you have any graphic card?

No graphic card, using onboard hdmi connect to monitor using DVI connector.
Got signal.

Using Microsoft X6 keyboard, if my keyboard lighted up means able to boot Bios.

Otherwise just fan spinning and power switch lighted

 

[Dreamer_Wind]

Got extra monitor ? Try other monitor

 

[mib500]

I had tried reinstall n delete previous partition that left behind after installation failed.
Still cannot and I had re download the OS.

The biggest problem I facing is booting of bios, maybe 2 out of 10times is successful.
Everything is detected if I able to boot and the temp of cpu ard 3x to low 40s.
While ram at 2133 instead of 2666mhz

yeah ram will remain default at 2133.... but mine i don't have any issue...

 

[speedknight]

Have you try to resit your rams like previously mentioned?

 

[mib500]

try install just using one ram... see how...

 

[LIN_JOEL]

Resit still the same, dvd rom spinning.
Cooler fan running but keyboard no light, system nv boot.

 

[Krabs.]

reset bios jumper ? then go in Use Optimized Default

confirm only 1 ram in the second slot ?

 

[oddbasket]

cannot post, hardware failure or bios settings wrong.
data corruption, ram

try remove cmos batt to rest bios, then see can post anot
if can, don't change settings first except boot settings to UEFI then try install win8.1

if cannot post, try each stick of ram individually and see can post anot

 

[LIN_JOEL]

I tried all the methods except remove cmos battery.
Only turn off all power n press the clear cmos.

Tried numerous times of all the method mention and finally got to boot and load win 8 installation screen.
Hang for very long and I reboot, cannot boot again.

Very late Liao, shall try again tomorrow.
Thanks all for the advise

 

[mib500]

I tried all the methods except remove cmos battery.
Only turn off all power n press the clear cmos.

Tried numerous times of all the method mention and finally got to boot and load win 8 installation screen.
Hang for very long and I reboot, cannot boot again.

Very late Liao, shall try again tomorrow.
Thanks all for the advise

Yeah keep trying... its weird cause i dont have this kind of issue... must be something wrong... suspect its ram... make sure your bios setting all at default...

 

[jtjt00]

Suspect ram issue.

 

[LIN_JOEL]

Suspect ram issue.

I think so.... cos I search webby and found I'm not the only one with booting issue with Z170 / X99 board.

Will try to take out ram & boot to confirm again, if got 3 beep = all ok except ram?

 

[mib500]

I think so.... cos I search webby and found I'm not the only one with booting issue with Z170 / X99 board.

Will try to take out ram & boot to confirm again, if got 3 beep = all ok except ram?

Try to use one ram first... sometime its memory management issue..

 

[LIN_JOEL]

Try to use one ram first... sometime its memory management issue..

tried again was able to boot with 1 ram on the 2nd slot.
Once run with USB for setup, Error appear saying windows checking for system/hardware error....

Very sian...dunno what to do now..

 

[mib500]

tried again was able to boot with 1 ram on the 2nd slot.
Once run with USB for setup, Error appear saying windows checking for system/hardware error....

Very sian...dunno what to do now..

hhmm very complicated... best you bring down to nigel see if he can assist....