iRobot Scooba experience

Status
Not open for further replies.

aptget

Supremacy Member
Joined
May 6, 2001
Messages
8,427
Reaction score
1
I have laminated flooring, so Scooba is OK with the washing /scrubbing ? Does it vaccum as well ? or do I have to buy both Roomba for vaccum and Scooba was washing ?
 

uno_bliss

Senior Member
Joined
Oct 4, 2009
Messages
852
Reaction score
2
I have laminated flooring, so Scooba is OK with the washing /scrubbing ? Does it vaccum as well ? or do I have to buy both Roomba for vaccum and Scooba was washing ?
iRobot specifically said Scooba not suitable for laminate. Laminate is too sensitive to moisture, might warp.
Scooba is generally quite dry, but wear & tear can result in excessive wetness. Certain faults can lead to inability to suck back water & all water left on ur laminate will be disastrous.

Roomba is dry vacuum sweeper, so no risk of damage to laminate.
 

Jubooo

Senior Member
Joined
Apr 30, 2008
Messages
625
Reaction score
0
I have laminated flooring, so Scooba is OK with the washing /scrubbing ? Does it vaccum as well ? or do I have to buy both Roomba for vaccum and Scooba was washing ?

Scooba does have a prep vacuum stage where it'll pickup loose debris. If you can tolerate the amount of dust and debris in between using scooba, by all means. If not a roomba is very good for daily upkeeping as it can pickup a bunch of dust everyday. Scooba will compliment it as the floor really feel fresh after running through with water.

Feel free to checkout www.RobovacShop.com
 

Vachel Chan

Member
Joined
May 6, 2011
Messages
299
Reaction score
0
I have laminated flooring, so Scooba is OK with the washing /scrubbing ? Does it vaccum as well ? or do I have to buy both Roomba for vaccum and Scooba was washing ?

Scooba is actually not really recommended for all laminated flooring. It is stated in the manufacturer's guide. Anyway pretty sure you can arrange for a demonstration of the Scooba on your flooring to see if the wetness is suitable.
For a safer bet, May want to consider some models which have a wet wipe function and vacuums at the same time. The iclebo arte ($749) and latest Lg Roboking square 6260 ($858). can do that.
The new LG Roboking allows for an attachment of a large microfiber cloth for wet wiping. Although is it not the same as the washing of the Scooba. But if the Scooba is deemed too wet for your liking. This may be of consideration too. You may use the Wet wipe function for only selected areas like the kitchen. It navigates systematically too and its square design covers all areas comprehensively. You can place it in your kitchen, start it up and enclose it there. Once its done, it would return to the same spot and angle you place it. Thanks for your PM, would do our utmost to assist. :)

For videos and specifications for a range of Robotic Cleaners. Do checkout Autovacstore.com
 

wongkc

Arch-Supremacy Member
Joined
Sep 18, 2001
Messages
21,792
Reaction score
9,637
Scooba is actually not really recommended for all laminated flooring. It is stated in the manufacturer's guide. Anyway pretty sure you can arrange for a demonstration of the Scooba on your flooring to see if the wetness is suitable.
For a safer bet, May want to consider some models which have a wet wipe function and vacuums at the same time. The iclebo arte ($749) and latest Lg Roboking square 6260 ($858). can do that.
The new LG Roboking allows for an attachment of a large microfiber cloth for wet wiping. Although is it not the same as the washing of the Scooba. But if the Scooba is deemed too wet for your liking. This may be of consideration too. You may use the Wet wipe function for only selected areas like the kitchen. It navigates systematically too and its square design covers all areas comprehensively. You can place it in your kitchen, start it up and enclose it there. Once its done, it would return to the same spot and angle you place it. Thanks for your PM, would do our utmost to assist. :)

For videos and specifications for a range of Robotic Cleaners. Do checkout Autovacstore.com

Does the 6260 comes with the wet wipe attachment? need to buy the microfiber cloth separately or can use any kind of microfiber cloth?
 

peter2883

Member
Joined
Dec 16, 2005
Messages
239
Reaction score
0
Does the 6260 comes with the wet wipe attachment? need to buy the microfiber cloth separately or can use any kind of microfiber cloth?

From what I read the Microfiber cloth comes with the 6260...
Roboking1_zps67ae8d81.png

Roboking2_zpsaca5ec03.png

Roboking3_zpsefb67663.png

Roboking4_zps84ffe517.png
 

Vachel Chan

Member
Joined
May 6, 2011
Messages
299
Reaction score
0
Does the 6260 comes with the wet wipe attachment? need to buy the microfiber cloth separately or can use any kind of microfiber cloth?

Hi, comes with 2 washable microfiber cloth, can be washed and used repeatedly, would probably a year. Using any microfiber cloth is ok, provided the side fits or is made to fit as the original. it attaches to detachable Cloth holder mold with Velcro design. Many thanks for the interest. :)
 

stonefish35

Master Member
Joined
Jan 13, 2004
Messages
3,608
Reaction score
71
Hi, The LG Roboking VR6270LVM (red, $988) has a function which allows it to activate its "turbo mode" automatically when it cleans carpets and rugs. The LG Roboking VR6260LVM (black, $858) has a turbo mode too which can be activated manual with a click of a button. Both the Latest LG Roboking models have exacting parts and specifications, comes with systematic navigation and dual side brush with square design for better coverage. Many thanks for the interest.

For videos and specifications on a range of Robotic Cleaners, Do checkout Autovacstore.com


I see, Thanks for the reply.
 

wongkc

Arch-Supremacy Member
Joined
Sep 18, 2001
Messages
21,792
Reaction score
9,637
Had bought the scooba 380 from them as well... but i couldn't say the same for it... i am rather disappointed... although Vincent from autovac did a demonstration and that my unit was working when he delivered it... I couldn't get it to work the next day... The 380 was not sucking in the water and the dirty tank was completely dry... luckily i didn't let it run unattended the first time... else i would have flooded my area... I contacted Vincent and asked him for troubleshooting methods... he suggested putting in more Magic Clean solution and try to flush the inlet to clear any chokage... Tried once it wasn't working... and Vincent assured me they would change for me on the spot if really faulty when they come to check... The next day i try flushing it with higher pressure of water... and it worked this time... the 380 is able to suck in the dirty water now... I am not sure if it was a user problem or is the machine prone to chokage(despite only used it once for demo, i will continue to monitor it)?

Now for the performance... i will say i am disappointed... Firstly the 380 is too wet for my liking... after the clean water tank is empty and it goes into the drying mode... it did not cover the whole area even though it is just a small square room... you can see the random water trail the 380 had run thru... Next i tried it on my homogeneous tiles... it performed even more poorly... the 380 rubber blade beneath seems have a lot of fiction with the floor and it cannot travel smoothly throughout... i think becoz of this... it is unable to navigate properly thus cozing it to dry the area poorly... I can see watermark everywhere... i am unsure if this is normal... will try a few more times to see izzit becoz my tiles are new and thus so much friction...

Perhaps all these are normal? Can other scooba 380 users comment on this?
 

Vachel Chan

Member
Joined
May 6, 2011
Messages
299
Reaction score
0
Now for the performance... i will say i am disappointed... Firstly the 380 is too wet for my liking... after the clean water tank is empty and it goes into the drying mode... it did not cover the whole area even though it is just a small square room... you can see the random water trail the 380 had run thru... Next i tried it on my homogeneous tiles... it performed even more poorly... the 380 rubber blade beneath seems have a lot of fiction with the floor and it cannot travel smoothly throughout... i think becoz of this... it is unable to navigate properly thus cozing it to dry the area poorly... I can see watermark everywhere... i am unsure if this is normal... will try a few more times to see izzit becoz my tiles are new and thus so much friction...

Perhaps all these are normal? Can other scooba 380 users comment on this?

Do understand your problem with the Scooba, with it being too wet. The scooba is not prone to chokage. I believe its sucking the water back to the dirty tank, just that the floor may still be a little too wet for your liking.
A way you can better utilize it would be to not fill the tank to full, perhaps only 1/2 full, confine it to a smaller area to clean, thus when the clean tank is empty, in its drying mode, would cover the cleaned/wet area more comprehensively.
Rest assured, as promised we would replace the set with a brand new unit if its faulty and we would do our utmost to assist you.
If it is not too your liking, please contact us, would gladly offer another Robot that suits your needs. The worst thing would be to live with a Robot that does not suit your needs, and we would hate to see that too. :)

For videos and specifications on a range of Robotic Cleaners, Do checkout Autovacstore.com
 

wongkc

Arch-Supremacy Member
Joined
Sep 18, 2001
Messages
21,792
Reaction score
9,637
Do understand your problem with the Scooba, with it being too wet. The scooba is not prone to chokage. I believe its sucking the water back to the dirty tank, just that the floor may still be a little too wet for your liking.
A way you can better utilize it would be to not fill the tank to full, perhaps only 1/2 full, confine it to a smaller area to clean, thus when the clean tank is empty, in its drying mode, would cover the cleaned/wet area more comprehensively.
Rest assured, as promised we would replace the set with a brand new unit if its faulty and we would do our utmost to assist you.
If it is not too your liking, please contact us, would gladly offer another Robot that suits your needs. The worst thing would be to live with a Robot that does not suit your needs, and we would hate to see that too. :)

For videos and specifications on a range of Robotic Cleaners, Do checkout Autovacstore.com

Hi Vachel,

Thanks for the reply...

I will continue monitoring the performance... perhaps it is my tiles... If there is a need for further action or troubleshooting, i will contact you guys...

Great service and response from Autovac btw...
 

peter2883

Member
Joined
Dec 16, 2005
Messages
239
Reaction score
0
Hi Vachel,

Thanks for the reply...

I will continue monitoring the performance... perhaps it is my tiles... If there is a need for further action or troubleshooting, i will contact you guys...

Great service and response from Autovac btw...

I actually read from forums that you might need to "condition" the brushes... When it's new the bristles are kinda hard so free using it a few times it will be more seasoned and perform better...

When I first used my Scooba 380 the floor was also wet but after using it a few times now the floor is much drier now...
 

bakasa2002

Supremacy Member
Joined
Jul 26, 2006
Messages
6,308
Reaction score
3
iRobot specifically said Scooba not suitable for laminate. Laminate is too sensitive to moisture, might warp.
Scooba is generally quite dry, but wear & tear can result in excessive wetness. Certain faults can lead to inability to suck back water & all water left on ur laminate will be disastrous.

Roomba is dry vacuum sweeper, so no risk of damage to laminate.

If it's timber flooring, it's ok?
 

bakasa2002

Supremacy Member
Joined
Jul 26, 2006
Messages
6,308
Reaction score
3
Perhaps all these are normal? Can other scooba 380 users comment on this?

I am a 340 user not a 380 and I do have this problem from time to time. Hate it when it leave a watermark, I am assuming you are having glossy homogenous tiles that why it is visible. I suggest u run in for a mth or so and contact your seller if you are still not happy with it.

I have to say the flip side of the Scooba problems about wetness and watermark is that I am having a really clean floor after each wash, compared to manual mopping. :)
 

bakasa2002

Supremacy Member
Joined
Jul 26, 2006
Messages
6,308
Reaction score
3
iRobot say safe on "sealed hardwood", sealed means got protective coating, hardwood means real wood, not things like Chip Board or laminate.

I've been using Scooba on my parquet for >4 yrs.

Thanks ah ... v enlightening ... ;P
 
Status
Not open for further replies.
Important Forum Advisory Note
This forum is moderated by volunteer moderators who will react only to members' feedback on posts. Moderators are not employees or representatives of HWZ Forums. Forum members and moderators are responsible for their own posts. Please refer to our Community Guidelines and Standards and Terms and Conditions for more information.
Top