Lancool K-series Users Group

KeYoKe

High Supremacy Member
Joined
Jul 14, 2005
Messages
37,861
Reaction score
10,102
haha.. yeah.. i think you should up your NB voltage... haha XD

how high shld i increase sia =X hmmm, just now i increase vcore till 1.5V cos trying 4ghz. once i save settings mobo auto switch off power... turn on den its 1.5V... tink going over e limit le hahahas!
 

Kzhan00b

Arch-Supremacy Member
Joined
Dec 20, 2009
Messages
23,939
Reaction score
4
how high shld i increase sia =X hmmm, just now i increase vcore till 1.5V cos trying 4ghz. once i save settings mobo auto switch off power... turn on den its 1.5V... tink going over e limit le hahahas!
haha dont worry i think i reached 1.525v with my mobo to try 4.0 before... and its not stable.. LOL

uhh... i suggest you slowly increase ba... dont suddenly increase so much.. haha..

for 3.7 i think.. you can try up by 0.025v first ba.. or 1 unit on your mobo.. lol
 

KeYoKe

High Supremacy Member
Joined
Jul 14, 2005
Messages
37,861
Reaction score
10,102
haha dont worry i think i reached 1.525v with my mobo to try 4.0 before... and its not stable.. LOL

uhh... i suggest you slowly increase ba... dont suddenly increase so much.. haha..

for 3.7 i think.. you can try up by 0.025v first ba.. or 1 unit on your mobo.. lol

roger... hahas... 3.8 leh? tink i push 200mhz for now... vcore a bit high sia... scary leh LOL! how bout NB speed? for 3.8 need lower to 1968 bo?
 

Kzhan00b

Arch-Supremacy Member
Joined
Dec 20, 2009
Messages
23,939
Reaction score
4
roger... hahas... 3.8 leh? tink i push 200mhz for now... vcore a bit high sia... scary leh LOL! how bout NB speed? for 3.8 need lower to 1968 bo?
haha i dunno ba... use your current settings, the 3.7 one, and up your NB voltage until its stable, then you up your fsb by 2 or 3 units until not stable, then up CPU or NB volts till stable, and repeat till 3.8,3.9,4.0! :D

but must stress ah :D

1 hour to be safe, 20 minutes if you no time :D

but since you studying.. why not? :D
 

KeYoKe

High Supremacy Member
Joined
Jul 14, 2005
Messages
37,861
Reaction score
10,102
haha i dunno ba... use your current settings, the 3.7 one, and up your NB voltage until its stable, then you up your fsb by 2 or 3 units until not stable, then up CPU or NB volts till stable, and repeat till 3.8,3.9,4.0! :D

LOL all rites... try in 5 mins =X :s13: so means NB speed dun need adjust ah? how bout ram? ya lor... can stress dun worry hahahas!
 

Kzhan00b

Arch-Supremacy Member
Joined
Dec 20, 2009
Messages
23,939
Reaction score
4
LOL all rites... try in 5 mins =X :s13: so means NB speed dun need adjust ah? how bout ram?
Haha good luck! :D

do tell me your temps when you reach 3.8... and the settings too.. cause when i was at 3.8, my load temps were 79... XDXD
 

KeYoKe

High Supremacy Member
Joined
Jul 14, 2005
Messages
37,861
Reaction score
10,102
Haha good luck! :D

do tell me your temps when you reach 3.8... and the settings too.. cause when i was at 3.8, my load temps were 79... XDXD

ram dun need adjust le ah? let it at 640mhz? ur ram running at its full stock speed or got lower? mine ddr1333 become 1280 =X
 

Kzhan00b

Arch-Supremacy Member
Joined
Dec 20, 2009
Messages
23,939
Reaction score
4
ram dun need adjust le ah? let it at 640mhz? ur ram running at its full stock speed or got lower? mine ddr1333 become 1280 =X
I fsb from 200 to 225, so my rams are running at 1499mhz at stock volts.. no problem here.. :D

depends actually... you test how high your rams can run before it fails to run/not stable.. then from that maybe its easy to guage when to turn down the ram multiplier..

not sure.. my noob opinion.. not a expert overclocker here.. :D
 

KeYoKe

High Supremacy Member
Joined
Jul 14, 2005
Messages
37,861
Reaction score
10,102
I fsb from 200 to 225, so my rams are running at 1499mhz at stock volts.. no problem here.. :D

depends actually... you test how high your rams can run before it fails to run/not stable.. then from that maybe its easy to guage when to turn down the ram multiplier..

not sure.. my noob opinion.. not a expert overclocker here.. :D

adjust voltage if too high mobo will auto turn off and turn on again, normal ah
 

repel89

Banned
Joined
May 31, 2008
Messages
5,076
Reaction score
0
I would say finally, 4.0Ghz below 60 degrees is no longer a dream :D:D

P1080510.jpg


P1080511.jpg
 

Kzhan00b

Arch-Supremacy Member
Joined
Dec 20, 2009
Messages
23,939
Reaction score
4
I would say finally, 4.0Ghz below 60 degrees is no longer a dream :D:D
Xigmatek fans soooo nice x.x
Power Phases lights looks... out of place in this white/blue/purple led lights.. XD
Unisleeved 24pins for you sir? :D
Still want my AGP GFX? :D
Time for you to get 5970,
and time for you to go WC
Plus, remember to go 4.5ghz soon!

AND.... FRONT PANEL?!?!? XD

Oh yeah... and having my processor at 4.0ghz at idle below 60 degrees is still a dream... for me :D:D:D
 

repel89

Banned
Joined
May 31, 2008
Messages
5,076
Reaction score
0
Some temps reports. All reports different. Note that though OCCT reports 2 cores its actually testing 4 cores. Average temps is around 63 degrees.

abc.jpg
 

FastForwardToFriday

Senior Member
Joined
Jul 1, 2010
Messages
1,620
Reaction score
0
repel bro! guess ur rig is up and running!! hahas! DAMN MAN! the xigmatek black fan looks sweets! hahas.. show ur kama bay leh! i wan see! :p
 
Important Forum Advisory Note
This forum is moderated by volunteer moderators who will react only to members' feedback on posts. Moderators are not employees or representatives of HWZ Forums. Forum members and moderators are responsible for their own posts. Please refer to our Community Guidelines and Standards and Terms and Conditions for more information.
Top