MyRepublic fibre - Part 4

Status
Not open for further replies.

bovi77

Member
Joined
Jun 20, 2012
Messages
147
Reaction score
0
I doubt it is possible because MR will collect back the old ONT and give you the new ONT when they install the 1Gbps.

by the way those of you who do stream twitch live @ source quality 99% smooth. could you share with me the transfer speed? I use networx and for me it showed a max 220KB/s when i could give the source live streams to even load. couple days back it was 20-30KB/s and today its between 50 to 150KB/s (meaning source buffers 90% of the time, High buffers 50% of the time)

appreciate it!
 

layang89

Member
Joined
May 26, 2011
Messages
161
Reaction score
0
Because MR became an OpCo; therefore, OpenNet will need to deactivate your existing fibre and MR will be changing the ONT to a new one together (with your ASUS router if you opted for one).

About the Next Gen NBN OpCo

In short, MR will be managing their own back end infrastructure instead of Nucleus Connect.
This sound very disrupting. Why cant we keep the existing ONT while MR sort out the backend connection with OpenNet, patch it to MR instead of NC.
 

Lehnsherr

Supremacy Member
Joined
Feb 19, 2001
Messages
5,312
Reaction score
49
This sound very disrupting. Why cant we keep the existing ONT while MR sort out the backend connection with OpenNet, patch it to MR instead of NC.

I am no networking expert or I work in the industry. I am guessing that the ONT that belonged to NC is configured to work for NC only, and u can't patch it anyhow. Just like cable modems, If you switch around starhub and M1 u would have to switch the cable modem as well.
 

xRenol

Supremacy Member
Joined
Dec 27, 2011
Messages
7,243
Reaction score
194
This sound very disrupting. Why cant we keep the existing ONT while MR sort out the backend connection with OpenNet, patch it to MR instead of NC.

I am no networking expert or I work in the industry. I am guessing that the ONT that belonged to NC is configured to work for NC only, and u can't patch it anyhow. Just like cable modems, If you switch around starhub and M1 u would have to switch the cable modem as well.

Yes, there are some configurations need to be done to the ONT but I am not sure if it will be that simple or not.
 

nivleK1985

Senior Member
Joined
Feb 20, 2005
Messages
1,710
Reaction score
0
Sorry, on leave today so didn't reply in the afternoon >.<"

I think Myrepublic need to improve on their cs. i recontracted and recommended my friend to signup. as a new sign up, my friend was contacted with installation date while i am still waiting.
tried calling customer support, forever on hold and advise to use online chat, use online chat, no one answer...

if i want to terminate, how can i do so now since no cs ever answer:s11::s11:.... is this their strategy tat u have no way to terminate? :vijayadmin:

Send me a mail @ solomon@myrepublic.com.sg i will redirect the mail to relevant department.

I'm on the old gamer plan and i'm experiencing very bad latency in diablo 3, could this be looked into? i'm connected via lan

This is the server issue, we will contact diablo on this. New game server = normal .

for the sake of comparison would the new ONT offer any advantage to over the old ONT if both are on the same plan?

any possibility of "defective" ONT causing poorer actualy internet performance in terms of streaming & downloading. not talking about speedtests.

We must switch the ONT because it's linked to our server

This sound very disrupting. Why cant we keep the existing ONT while MR sort out the backend connection with OpenNet, patch it to MR instead of NC.

the old ONT belong to NC and we will need to use NC in order to use that hardware

I am no networking expert or I work in the industry. I am guessing that the ONT that belonged to NC is configured to work for NC only, and u can't patch it anyhow. Just like cable modems, If you switch around starhub and M1 u would have to switch the cable modem as well.

Yup.
 

splatz

Junior Member
Joined
Jul 25, 2007
Messages
75
Reaction score
0
Just got my 1Gbps installed today.

Connected laptop to router via LAN cable (all Gigabit) max 300Mbps only. The MR staff who came to install tried using his own laptop and purple LAN cable to test too, max 300Mbps only. Can MR check please?

The MR staff then said Punggol/Sengkang area he has only seen max 300Mbps, still finetuning the backend so don't expect anywhere near 1Gbps. Only West side can see 800+, 900+ Mbps.

If this is true, then not fair for those saying in Northeast to be paying full subscription but MR not delivering.
 

Fiery84

Senior Member
Joined
Jun 29, 2002
Messages
852
Reaction score
24
Hi i would like to terminate my fiber services with immediate effect, can someone get back to me? Thanks.

C1006815

Has anyone managed to successfully terminate their myrepublic fibre? I have emailed them last saturday as well posted here but it seems i am being ignored.
 

mcmxcii

Member
Joined
Jun 30, 2007
Messages
110
Reaction score
44
Just got my 1Gbps installed today.

Connected laptop to router via LAN cable (all Gigabit) max 300Mbps only. The MR staff who came to install tried using his own laptop and purple LAN cable to test too, max 300Mbps only. Can MR check please?

The MR staff then said Punggol/Sengkang area he has only seen max 300Mbps, still finetuning the backend so don't expect anywhere near 1Gbps. Only West side can see 800+, 900+ Mbps.

If this is true, then not fair for those saying in Northeast to be paying full subscription but MR not delivering.


My LAN cable Speedtest Download Speed is 341.24Mbps.
Location: Geylang East.
 

shager

Master Member
Joined
Jan 1, 2000
Messages
4,181
Reaction score
695
Just signed up and included Home voice. Is there an unlisted number VAS so that it does not appear anywhere in the Yellow Pages etc.

Thanks.
 

bovi77

Member
Joined
Jun 20, 2012
Messages
147
Reaction score
0
the old ONT belong to NC and we will need to use NC in order to use that hardware

so you are saying if i borrow a MR ONT, it won't work on my current connection because its tied to NC?

I heard from tech support that my beta line will be using the same port on my TP, not the 2nd port. in this case is the 1st statement still true?

thx
 

xRenol

Supremacy Member
Joined
Dec 27, 2011
Messages
7,243
Reaction score
194
so you are saying if i borrow a MR ONT, it won't work on my current connection because its tied to NC?

I heard from tech support that my beta line will be using the same port on my TP, not the 2nd port. in this case is the 1st statement still true?

thx

If I am not wrong, OpenNet will deactivate the connection from NC ONT (Port 1 of TP) and connect to MR ONT (Port 1 of TP) from their back end system at your block.
 

nivleK1985

Senior Member
Joined
Feb 20, 2005
Messages
1,710
Reaction score
0
so you are saying if i borrow a MR ONT, it won't work on my current connection because its tied to NC?

I heard from tech support that my beta line will be using the same port on my TP, not the 2nd port. in this case is the 1st statement still true?

thx

yup.

yup. =)
 

henrylim1972

Senior Member
Joined
Jul 4, 2011
Messages
1,355
Reaction score
0
Puzzled

Hi,

A couple of things to note:

a) Those with Home Voice - you will not need the ATA anymore. Whoopee !!:s12:

b) I tested 900 directly from the ONT but when I plug into the router (N66U) and test it from the room which goes thru a 1GB Switch, it drops to 176 instead. Any ideas?

c) You can use http://speedtest.myrepublic.com.sg/ to test the connection.
 
Status
Not open for further replies.
Important Forum Advisory Note
This forum is moderated by volunteer moderators who will react only to members' feedback on posts. Moderators are not employees or representatives of HWZ Forums. Forum members and moderators are responsible for their own posts. Please refer to our Community Guidelines and Standards and Terms and Conditions for more information.
Top