MyRepublic fibre - Part 4

Status
Not open for further replies.

henrylim1972

Senior Member
Joined
Jul 4, 2011
Messages
1,355
Reaction score
0
Still getting crappy speed - new router (selling old one - N66U : PM if interested)

lNWmHgB.jpg
 

YouKilledKenny

Master Member
Joined
Aug 10, 2003
Messages
4,916
Reaction score
19
So you mean that you no longer need your router mac address for the static ip?

Instructions:

  1. Ensure that your router is set to DHCP. There is no need to set your router setting to Static IP. The process is automatic from our end.
  2. Configure all devices that require Static IP with your new Static IP address.
  3. That's it! Enjoy your new Static IP.

If you forget what your Static IP is, an easy way is find out to visit What Is My IP | The IP Address Experts Since 1999 or similar websites.

If you are an existing MyRepublic customer migrating from an older plan to 1Gbps, please take special note of Step 1. Your existing router will likely have been set to Static IP instead of DHCP.

******

This is what it says in my email (MR sent me one to inform me of my static IP).
 

hangyong

Master Member
Joined
May 9, 2002
Messages
3,838
Reaction score
0
My problem with MR's new 1Gbps plan:
Connected to Wireless network but not connected to internet

Anyone encounter similar issue? I am using an old HP AIO running Windows Vista.
My other devices, laptop, ipads, phones all connected with no issues. (I dont have a lan connection, all wireless devices)

Could not update the firmware over wifi, so may try to download from Asus and install. Any other firmware i should try instead.

Appreciate any help, thanks.

just my guess ok??
your wireless NIC may have compatibility issues with the router... or vice versa...

you can try Merlin's Tower
 

nivleK1985

Senior Member
Joined
Feb 20, 2005
Messages
1,710
Reaction score
0
http://dlcdnet.asus.com/pub/ASUS/wireless/RT-AC68U/FW_RT_AC68U_30043744887.zip

Hi guys, pls download the above firmware for AC68.


Plug out every single cable, reset your router. and plug in one by one. If there's slow speed connection for that particular PC/Laptop. Kindly change to another cable and see if the speed will improve. Also try changing the ports and see if there's any improvement.

I notice that changing the cable improve my speed by 30-50Mbps, as cable over the years may wear down.

Thanks!

As for N66. Kindly give me a while more to look for the most suitable firmware to be used.

Meanwhile Asus is busy fixing the various routers.
 
Last edited:

hangyong

Master Member
Joined
May 9, 2002
Messages
3,838
Reaction score
0
http://dlcdnet.asus.com/pub/ASUS/wireless/RT-AC68U/FW_RT_AC68U_30043744887.zip

Hi guys, pls download the above firmware for AC68.


Plug out every single cable, reset your router. and plug in one by one. If there's slow speed connection for that particular PC/Laptop. Kindly change to another cable and see if the speed will improve. Also try changing the ports and see if there's any improvement.

I notice that changing the cable improve my speed by 30-50Mbps, as cable over the years may wear down.

Thanks!

As for N66. Kindly give me a while more to look for the most suitable firmware to be used.

Meanwhile Asus is busy fixing the various routers.

asus better do something about it... their router problems are reported all over the world...
 

nivleK1985

Senior Member
Joined
Feb 20, 2005
Messages
1,710
Reaction score
0
Dear MyRepublic subscribers,

We are aware of the longer-than-average waiting time on our hotlines. This is largely due to enquiries regarding OpenNet delays or 1Gbps fibre broadband installations.

We know that communication is important to our subscribers, and are currently increasing our resources and manpower to handle the higher volume of calls. We are also in the midst of implementing two new numbers specifically to handle enquiries about OpenNet delays and 1Gbps installations, which we will announce very soon.

You can also reach out to us here on Facebook or on Twitter(@MyRepublic) if you have enquiries on those or other matters. We recommend that you DM us as we require personal information (e.g. NRIC, email address) to check on your status. Thanks very much for your patience.
 

imacbie

Supremacy Member
Joined
Jul 3, 2004
Messages
6,405
Reaction score
2
on 374.40?

this one is because of a change in setting backend.
The authentication is no longer with MAC of router but rather on the ONT itself.

just leave everything in auto mode.

Yeah on 374.40
I see, will stick to auto.

What's up with the 200+ tho.. Zzz
 
Last edited:

henrylim1972

Senior Member
Joined
Jul 4, 2011
Messages
1,355
Reaction score
0
http://dlcdnet.asus.com/pub/ASUS/wireless/RT-AC68U/FW_RT_AC68U_30043744887.zip

Hi guys, pls download the above firmware for AC68.


Plug out every single cable, reset your router. and plug in one by one. If there's slow speed connection for that particular PC/Laptop. Kindly change to another cable and see if the speed will improve. Also try changing the ports and see if there's any improvement.

I notice that changing the cable improve my speed by 30-50Mbps, as cable over the years may wear down.

Thanks!

As for N66. Kindly give me a while more to look for the most suitable firmware to be used.

Meanwhile Asus is busy fixing the various routers.

No go .... upgraded the firmware ... the speed is still stuck at 300 for download .. this is crap .. man ...
 

nivleK1985

Senior Member
Joined
Feb 20, 2005
Messages
1,710
Reaction score
0
No go .... upgraded the firmware ... the speed is still stuck at 300 for download .. this is crap .. man ...

but ont is 800?

have you reset the router and tried on 2 different computer?

I notice my imac 2009 was getting 300-500Mbps. but macbook pro 2012 was getting 940.
 

henrylim1972

Senior Member
Joined
Jul 4, 2011
Messages
1,355
Reaction score
0
but ont is 800?

have you reset the router and tried on 2 different computer?

I notice my imac 2009 was getting 300-500Mbps. but macbook pro 2012 was getting 940.

Yes ... at least my situation is consistent .. I am getting 300+ via the router for 2 different computers..
 

hangyong

Master Member
Joined
May 9, 2002
Messages
3,838
Reaction score
0
No go .... upgraded the firmware ... the speed is still stuck at 300 for download .. this is crap .. man ...

I dunno if this will help....

my late 2009 MBP and 2012 MBP gives different speed even on ONT, with the 2102 one much faster...

connect to router... the difference even bigger...

so as much as I can say... the laptop NIC also got problem...


wah laoz.... this brings back memories from the olden days when still using 10mbps NICs man...
 

Just Me

Arch-Supremacy Member
Joined
Jan 1, 2000
Messages
14,249
Reaction score
41
Still getting crappy speed - new router (selling old one - N66U : PM if interested)

lNWmHgB.jpg
I run the speed test at least once a day. Always getting max speed 940+/475+

Had LAN trunking done by a very reputable contractor with 2x faceplates one at ONT and the other in bedroom with 3m cat6 cables. For the connecting cables to faceplates, I use belden cat6.
 

nivleK1985

Senior Member
Joined
Feb 20, 2005
Messages
1,710
Reaction score
0
I run the speed test at least once a day. Always getting max speed 940+/475+

Had LAN trunking done by a very reputable contractor with 2x faceplates one at ONT and the other in bedroom with 3m cat6 cables. For the connecting cables to faceplates, I use belden cat6.

940Mbps is awesome! Possible to provide us with the number for the contractor?
 

henrylim1972

Senior Member
Joined
Jul 4, 2011
Messages
1,355
Reaction score
0
I run the speed test at least once a day. Always getting max speed 940+/475+

Had LAN trunking done by a very reputable contractor with 2x faceplates one at ONT and the other in bedroom with 3m cat6 cables. For the connecting cables to faceplates, I use belden cat6.

I assume you are using AC68 as well ? What's the version of your firmware?
 
Status
Not open for further replies.
Important Forum Advisory Note
This forum is moderated by volunteer moderators who will react only to members' feedback on posts. Moderators are not employees or representatives of HWZ Forums. Forum members and moderators are responsible for their own posts. Please refer to our Community Guidelines and Standards and Terms and Conditions for more information.
Top