MyRepublic fibre - Part 4

Status
Not open for further replies.

xRenol

Supremacy Member
Joined
Dec 27, 2011
Messages
7,243
Reaction score
194
That would be overly hopeful. In all my communications with OpenNet, they could only tell me they will try to resolve "insufficient fiber capacity" issues within 20 working days (i.e. one month).

For my case, OpenNet didn't show up at the scheduled appointment on 21st March. Subsequently, they showed up outside my house (without prior appointment) on 2nd April and did something to the electrical cabinet outside my house. On 3rd April, MR says OpenNet fixed whatever issues they had and scheduled an installation for me, tomorrow (6th April, was meant to be 26th March).

At least I didn't have to wait 20 working days for OpenNet (only 9 working days, should I be glad?) to get their act together (though I won't know for sure until MR shows up tomorrow, if they do).

Nope. I don't think that SLA refers to delays or postponements.

OpenNet will not provide any timeline for issue rectification whatsoever. They will only let you know once it is rectified, not any earlier.

That's the painful truth I'm afraid. If you are not satisfied with the situation, I suggest you write in IDA / MCI to complain. I did.

I thought OpenNet will only go to your block not your house to do something on their back end system on the schedule installation date. MR Field Engineer is the one who will go into your house to install the ONT and router (if you opt for one).
 

Phen8210

High Supremacy Member
Joined
Jul 29, 2011
Messages
29,116
Reaction score
8,338
MR came down to install my fiber yesterday. End up, OpenNet TP has no signal, so it's OpenNet's fault now. Why is the TP off in the first place? Why MR cannot liase with OpenNet to check the infrastructure first before making a wasted trip?

Will I be bumped to the back of the queue (i.e. be one of the last ones to get wired up)? Any priority? I don't have internet connection in my house now and I am wasting my data plan to surf on my laptop. Oh yeah, waste of leave

i also faced the same issue.. just keep calling them.
i called them more then 10 times past 2 days, the technician left without my internet working.

miraculously it's working now
 

xsrike

Senior Member
Joined
Oct 31, 2007
Messages
1,222
Reaction score
0
on direct ONT result?

Direct from Asus RT-N56U, wired cat 6. router firmware was updated beforehand and no further changes was made prior to the speed decrease

Direct ONT gives me the exact same result
 
Last edited:

bigtux

Member
Joined
Apr 17, 2008
Messages
251
Reaction score
0
1st post http://forums.hardwarezone.com.sg/84551556-post3699.html
2nd post http://forums.hardwarezone.com.sg/84714986-post4203.html

Now try again ...

Status check as we are coming to the end of Mar 2014 ...

C1000345
- was out of contract and then signed up for the 1Gbps deal on 14 Jan 2014
- was informed via the sign-up process that my estimated installation date was 01 Mar 2014 onwards
- have the signup confirmation email from 14 Jan 2014 and relevant screenshots
- no news thereafter

Would appreciate a status update and if possible to email me on the email that you have on record as I don't pop by HWZ daily.

Thank you.
 

misato

Supremacy Member
Joined
Jan 1, 2000
Messages
6,148
Reaction score
0

YouKilledKenny

Master Member
Joined
Aug 10, 2003
Messages
4,916
Reaction score
19
Just did some pre-installation testing (installation appointment tomorrow, half-expecting more delays) to make sure that my internal LAN cabling is fully gigabit-capable.

PkX6vwj.jpg


Now let's see what MyRepublic has to offer :)
 

echutah

Member
Joined
Nov 20, 2007
Messages
388
Reaction score
1
98% refers to successful one, totally no issue. Not inclusive of any that they rejected or cancel for any reason.

i would say 3 days to 7days is too long even if it's 100% successful.

Will release more details on this soon.

Can you reply my PM? I sent you 3 already since 2 weeks until now but no response, through twitter, myrepublic website and facebook..
 

qingtian

Supremacy Member
Joined
Jul 13, 2000
Messages
8,146
Reaction score
1
Hi Johnny,

Yes you could be right on that speedtest could be an indication/reference since there are couple of things that could affect this reading.

However the reading for a handful of us over here are totally off the scale of MR 1gbps advertised speed while another group of users over here could hit 900++mbps right in this forum.

In this case pls explain the rational of MR setting up a speedtest page right under myrepublic.com.sg domain which this indication are not as reliable as you suggested? While at the same time MR is using this as some kind of indication on the 1gbps performance as shown in the FB:-
https://www.facebook.com/MyRepublic...0.1396701368./807625045931510/?type=3&theater

FYI, traceroute to speedtest.myrepublic.com.sg is 3 hope away to your locally hosted site:-
10f1jbb.jpg


I do not understand what is the optimization that are missing in place for this low reading since a handful of the users here are getting good reading which you are potentially saying measurement could not be reliable.

Should this methodology from speedtest.myrepublic.com.sg are not reliable.

I strong advised MR set a http/ftp download site with a large file which could handle our 1gbps download. From there we would be able to gauge is this indeed a actual 1gbps downstream we are getting.

As a gentle reminder, you had not response to our concern that I had mention in my previous posting that I had highlighted in dark green.

In this scenario, what would be MR arrangement for this group of customers? I guess MR shouldn't be expecting us to pay for the FULL amount of subscription fee at the end of this month since we are not getting the advertised speed?

Hi qingtian, sorry I believe I might have been not very clear what I meant by "speed test inconsistencies".

I meant specifically for speed tests, which is just a measure by that particularly test route and may not be an actual indication of the potential speed that broadband line can give you. In other words, there are times when speed TEST results are low, but actual speeds remain optimal.

There are a number of reasons why this is so. Speed test routes may be unable to measure 1Gbps properly because they're actually not capable of measuring that speed. Something could be wrong "in between" us and the test server. This is why you're seeing higher upload speeds than download speeds.

So what I meant was - our 1Gbps may not be optimised for *tests* yet, which is different from actual speed.
 
Last edited:

nivleK1985

Senior Member
Joined
Feb 20, 2005
Messages
1,710
Reaction score
0
Hi Johnny,

Yes you could be right on that speedtest could be an indication/reference since there are couple of things that could affect this reading.

However the reading for a handful of us over here are totally off the scale of MR 1gbps advertised speed while another group of users over here could hit 900++mbps right in this forum.

In this case pls explain the rational of MR setting up a speedtest page right under myrepublic.com.sg domain which this indication are not as reliable as you suggested? While at the same time MR is using this as some kind of indication on the 1gbps performance as shown in the FB:-
https://www.facebook.com/MyRepublic...0.1396701368./807625045931510/?type=3&theater

FYI, traceroute to speedtest.myrepublic.com.sg is 3 hope away to your locally hosted site:-
10f1jbb.jpg


I do not understand what is the optimization that are missing in place for this low reading since a handful of the users here are getting good reading which you are potentially saying measurement could not be reliable.

Should this methodology from speedtest.myrepublic.com.sg are not reliable.

I strong advised MR set a http/ftp download site with a large file which could handle our 1gbps download. From there we would be able to gauge is this indeed a actual 1gbps downstream we are getting.

As a gentle reminder, you had not response to our concern that I had mention in my previous posting that I had highlighted in dark green.

In this scenario, what would be MR arrangement for this group of customers? I guess MR shouldn't be expecting us to pay for the FULL amount of subscription fee at the end of this month since we are not getting the advertised speed?


Hi if your ONT is not capable of hitting the speed. We will swap the ONT. Kindly drop me a mail @ Solomon@myrepublic.com.sg and I will arrange someone to drop by and do some check. Swap it and verify everything is working on the spot.
 

Boltersdriveer

Senior Member
Joined
Aug 8, 2010
Messages
1,862
Reaction score
0
Hi Johnny,

Yes you could be right on that speedtest could be an indication/reference since there are couple of things that could affect this reading.

However the reading for a handful of us over here are totally off the scale of MR 1gbps advertised speed while another group of users over here could hit 900++mbps right in this forum.

In this case pls explain the rational of MR setting up a speedtest page right under myrepublic.com.sg domain which this indication are not as reliable as you suggested? While at the same time MR is using this as some kind of indication on the 1gbps performance as shown in the FB:-
https://www.facebook.com/MyRepublic...0.1396701368./807625045931510/?type=3&theater

FYI, traceroute to speedtest.myrepublic.com.sg is 3 hope away to your locally hosted site:-
10f1jbb.jpg


I do not understand what is the optimization that are missing in place for this low reading since a handful of the users here are getting good reading which you are potentially saying measurement could not be reliable.

Should this methodology from speedtest.myrepublic.com.sg are not reliable.

I strong advised MR set a http/ftp download site with a large file which could handle our 1gbps download. From there we would be able to gauge is this indeed a actual 1gbps downstream we are getting.

As a gentle reminder, you had not response to our concern that I had mention in my previous posting that I had highlighted in dark green.

In this scenario, what would be MR arrangement for this group of customers? I guess MR shouldn't be expecting us to pay for the FULL amount of subscription fee at the end of this month since we are not getting the advertised speed?

Hi qingtian,

Perhaps you are not fully getting the idea about hosting a Speed Test server within our network. Basically by setting up the speed test server within our network, you are testing the connection from your place and the only variables in place are:
(a) Your last mile connectivity from the OLTs in the COs to your place
(b) Your computer's connection (Wireless, FE, GE)
(c) Your computer's configuration settings
(d) Your router (if your PC not connected directly to the ONT)

Typically if b, c and d are not actual factors (connected by a system which you know is able to get up to a Gigabit of throughput), then we may have to look into your connection further. It's hard to define these factors though, as some systems which have a GE network adaptor may not even be capable of hitting up to that speed.

For users who are far off from the 1Gbps mark, typically above 600-800 means that there is generally nothing wrong, while for the rest it really depends, further investigation may be necessary before coming to a conclusion.

Bolts
 

SkatyBoy

Member
Joined
Apr 27, 2012
Messages
297
Reaction score
0
Really sorry about the delay SkatyBoy, but I can assure you that all such cases (we call them failed installations) are at the top of the priority queue, not the bottom, and is being looked into by a separate team.

We do check with OpenNet... but when they don't tell us there's an issue, we won't know until we go down also. :(

Can you send DM me your Customer ID or email address? We'll help to track this for you.

Thanks for the assurance. I got a call from MR today, giving me a joint installation date next week. Hopefully, my installation won't delay again for any reasons such as complex problem with the TP or forgetting their screwdriver.

I'm not mad, just very disappointed by OpenNet's inefficiency. I'll give MR the benefit of doubt. They are new to this massive influx of customers and I can see that they are working hard.
 
Last edited:

kicknikuku

Supremacy Member
Joined
Feb 15, 2006
Messages
9,260
Reaction score
349
Got my 1gbps fixed today, signed up on first day of big launch. Haven't had problems along the way, pretty good, no complaints.

But the guy who came to install didnt tell me the user and pass for the ac68u. I want to configure the router. Tried admin and admin, it gives me a blank page, used both IE and chrome.

Any help?
 

Anybody

Senior Member
Joined
Jan 1, 2000
Messages
929
Reaction score
2
Got my 1gbps fixed today, signed up on first day of big launch. Haven't had problems along the way, pretty good, no complaints.

But the guy who came to install didnt tell me the user and pass for the ac68u. I want to configure the router. Tried admin and admin, it gives me a blank page, used both IE and chrome.

Any help?

Maybe try the reset button to restore it to default factory settings?
 

bigtux

Member
Joined
Apr 17, 2008
Messages
251
Reaction score
0
My Installation failed.. and was somehow "forgotten" judging from the lack of correspondence. Thus If you ask me which one is worst.. I would say both... but the failed installation would be the devil of the two as the subscriber (me) actually wasted a day of leave from work just to have things failed.

Definitely agree that it was a wasted day from work.

I guess in the quest to be "different" from the traffic lights, MR is actually slowly falling in line to be one of them. It might be too soon to judge but I am still very hopefully that the differentiating factors from the traffic lights that was once such a breath of fresh air would continue.

In the mean time, I will continue to wait for some form of correspondence. Maybe placing the following as part of my signature on replies on this thread might help. Maybe it will attract come attention? :p

- C1000345
- 14 Jan 2014 - signed up for the 1Gbps deal
- 14 Jan 2014 - sign-up process informed estimate installation = 01 Mar 2014
- no news thereafter
- still waiting...
 

YouKilledKenny

Master Member
Joined
Aug 10, 2003
Messages
4,916
Reaction score
19
Guys, Johnny, Solomon, just had my 1Gbps fixed.

I observed the same problem that many people on here faced with the AC68U.

When I changed the wireless defaults (set my own SSID, set both to WPA2, set the channel settings, etc.), the speedtest (speedtest.myrepublic.com.sg) results drop way back down to 300mbps+.

When I reset the router to default settings (then changed the internal LAN address to my previous LAN settings, i.e. all devices on 192.168.0.0/8), I get back again the wonderful results as follows,

VlbfRDi.jpg


Please contact your ASUS counterparts and try to recreate this problem. I have left my wireless networks switched off for now (by using the side-button on the AC68U to disable the wifi network).
 

Boltersdriveer

Senior Member
Joined
Aug 8, 2010
Messages
1,862
Reaction score
0
Got my 1gbps fixed today, signed up on first day of big launch. Haven't had problems along the way, pretty good, no complaints.

But the guy who came to install didnt tell me the user and pass for the ac68u. I want to configure the router. Tried admin and admin, it gives me a blank page, used both IE and chrome.

Any help?

Hi kicknikuku,

Default login is admin ; admin. If it doesn't work, try doing a factory reset by holding down the button on the side of the router for about 15 seconds. You should go through the initial setup configuration again.

Bolts
 

qingtian

Supremacy Member
Joined
Jul 13, 2000
Messages
8,146
Reaction score
1
Hi Bolts,

I appreciate your time in sharing the information with regards on a speed test server and the variables that could have affect the reading.

I would like to clarify that that I do fully understand how it work should not why would I even need to agreed in my last response that speedtest could be an indication/reference since there are couple of things that could affect this reading.

In case you had overlook my second last response.
http://forums.hardwarezone.com.sg/84768227-post4380.html

I would like to stress that that my speedtest reading is totally way off the scale which is around 200mbps instead of the others getting 900++mbps. and the Testing was done directly via ONT Modem.

I guess you could have given the ideas that I did a speedtest behind the router as I provide a traceroute from there.

With regards to your response:-
For users who are far off from the 1Gbps mark, typically above 600-800 means that there is generally nothing wrong, while for the rest it really depends, further investigation may be necessary before coming to a conclusion.


Thus with this reason which also inline with your response.
My scale are definitely far off from 1Gbps mark which do not fall in the range of 600-800mbps.

In this case, how the investigation so far from MR which I had been escalating for a couples of time with NO further follow Up and response via the MR customer service hotline that are done via proper channel?

Adding further, I would also like to share that the problem definitely is not the case of my Internal network as all of my wired devices are Gigabit capable and all are running via CAT 6 cable.

Other than this, Asus AC56U router had been hard rest before.
And it was confirmed on Router Level, it is seeing my device as 1000mbps.

Other troubleshooting steps that I had take also include update to latest ASUS official firmware and had also tried Melin Build.

Hi qingtian,

Perhaps you are not fully getting the idea about hosting a Speed Test server within our network. Basically by setting up the speed test server within our network, you are testing the connection from your place and the only variables in place are:
(a) Your last mile connectivity from the OLTs in the COs to your place
(b) Your computer's connection (Wireless, FE, GE)
(c) Your computer's configuration settings
(d) Your router (if your PC not connected directly to the ONT)

Typically if b, c and d are not actual factors (connected by a system which you know is able to get up to a Gigabit of throughput), then we may have to look into your connection further. It's hard to define these factors though, as some systems which have a GE network adaptor may not even be capable of hitting up to that speed.

For users who are far off from the 1Gbps mark, typically above 600-800 means that there is generally nothing wrong, while for the rest it really depends, further investigation may be necessary before coming to a conclusion.

Bolts
 
Last edited:
Status
Not open for further replies.
Important Forum Advisory Note
This forum is moderated by volunteer moderators who will react only to members' feedback on posts. Moderators are not employees or representatives of HWZ Forums. Forum members and moderators are responsible for their own posts. Please refer to our Community Guidelines and Standards and Terms and Conditions for more information.
Top