MyRepublic fibre - Part 4

Status
Not open for further replies.

leongws

Master Member
Joined
May 31, 2003
Messages
3,068
Reaction score
688
How is it if you are using padavan, I find the stock firmware is already very stable with good wifi strength.

I'm not sure as i have not use stock fw before. One different is for stock fw, the 5 GHz mode is 2T2R, which is 300 Mbps/300Mbps. However, padavan fw can unlock the 3rd R, giving u 2T3R. Which means 300Mbps/450Mbps. Never encounter any problem with padavan fw on N56u till i changed to ac68u few days back.
 

Dexter71

Senior Member
Joined
Jul 29, 2000
Messages
524
Reaction score
2
Hi

I just gotten my 1Gps plan installed. I tried a wired speedtest on Mac to gigabit hub and it only returned 95mb/s DL speed which is only <10$% of 1Gbps. I am doing a speed test using a singapore based server. My router is AC56U.

Anything else I need to check?

Thx
 

Boltersdriveer

Senior Member
Joined
Aug 8, 2010
Messages
1,862
Reaction score
0
Hi

I just gotten my 1Gps plan installed. I tried a wired speedtest on Mac to gigabit hub and it only returned 95mb/s DL speed which is only <10$% of 1Gbps. I am doing a speed test using a singapore based server. My router is AC56U.

Anything else I need to check?

Thx

Hi Dexter,

Kindly open the "Network Utility" on your Mac and check the "Link Speed" portion under the appropriate interface (screenshot: http://puu.sh/82Z2w.png). Also, check that you have a cat 6 ethernet cable for best results (though quality cat 5e cables work too).

Bolts
 

xRenol

Supremacy Member
Joined
Dec 27, 2011
Messages
7,243
Reaction score
194
Hi

I just gotten my 1Gps plan installed. I tried a wired speedtest on Mac to gigabit hub and it only returned 95mb/s DL speed which is only <10$% of 1Gbps. I am doing a speed test using a singapore based server. My router is AC56U.

Anything else I need to check?

Thx

1. Check the network adapter if it can support 1Gbps.

2. Do a speedtest on http://speedtest.myrepublic.com.sg/ on direct connection from ONT.
 

Just Me

Arch-Supremacy Member
Joined
Jan 1, 2000
Messages
14,249
Reaction score
41
I'm not sure as i have not use stock fw before. One different is for stock fw, the 5 GHz mode is 2T2R, which is 300 Mbps/300Mbps. However, padavan fw can unlock the 3rd R, giving u 2T3R. Which means 300Mbps/450Mbps. Never encounter any problem with padavan fw on N56u till i changed to ac68u few days back.
How do you unlock the 3rd R?
 

casshern

Master Member
Joined
Nov 21, 2005
Messages
3,670
Reaction score
0
just got my 1gbps installed.

Direct from ONT
3429786275.png
 

Izumanyan

Senior Member
Joined
Nov 18, 2009
Messages
840
Reaction score
114
My dad just received SMS from MR after they initially cancelled my appointment on the morning of the actual day itself due to "technical problems" (9th april) and promised to call back on Friday to schedule another appointment.

"Opennet is still experiencing issue and the appointments would be delayed till further notice (truncated)"

How long is the wait expected to be? I've never really had anything bad to comment about MR until now sia... Really quite disappointing.
 

blitzio

Senior Member
Joined
Apr 24, 2007
Messages
587
Reaction score
2
Got this in the mail today:

Dear Mr blitzio,

As of today, we have installed over 1,200 customers with MyRepublic 1Gbps. At our field team's busiest time over the weekends, we install about 200 customers a day, and we expect to do so faster and more efficiently in the many days to come.

We're telling you this not as an excuse, but to hopefully give you an understanding into our efforts in getting everyone connected to MyRepublic 1Gbps as soon as possible.

We do value your support.

As such, it is with sincere regret when we say that we are experiencing a delay with the activation of 1Gbps service to your address. While we are currently unable to now say how long the delay will be, our experience is that 80% of delays are resolved within 30-days.

Firstly, we say "your address" because this current resource limitation is highly location specific. The fibre lines, fibre resources and backend infrastructure managed by OpenNet are different for every address.

A number of customers who sign up during the same period as yourself may have no such issues at all.

What's Going On?

We understand there's been some confusion as to what's been causing customers to wait for their MyRepublic 1Gbps. Please allow us to help clear the air.

Before we even start moving forward with a MyRepublic 1Gbps installation, we need to submit our order to OpenNet for their processing and approval.

If OpenNet does not give us the OK to proceed for your address, we - as well as any other Singapore internet service provider - are unable to proceed with your installation.

For some cases, OpenNet will not take our orders if there are backend resource limitations affecting certain addresses. Our order would be rejected as invalid.

What Should I Do Now?

There is no need to update us. Our team is working feverishly with OpenNet to have confirmed your installation date, at the earliest possible date.

We will contact you with an update and to arrange for a new appointment as soon as these backend fibre issues have been resolved.

We understand that our customer hotline is currently experiencing a high volume of calls due to OpenNet-side delays. If you've been trying to get through and are unable to, we apologise.

In our experience, OpenNet technicians do not show up for their appointments as often as 4 times a day, which has resulted in a fair amount of frustrations.

To be fair, years ago in the early days of NBN fibre residential installations the percentage of installation failures due to OpenNet issues relating from the move from DSL/cable to fibre (e.g. fibre-top up, no signal, spring-board) was relatively high. Working together with the NBN companies, over-time these rates of failures on the residential side have been reduced dramatically, to an acceptable level (i.e. less than 3%).

We expect the same to happen with the MyRepublic 1Gbps rollout such that within 6 to 8 weeks, 97% of people who sign up will not experience OpenNet delays.

We humbly ask for your patience and kind understanding.

Sincerely,
The MyRepublic Team

Appreciate the transparency and updates, more of this please.
 

jamespang

Junior Member
Joined
Feb 28, 2010
Messages
6
Reaction score
0
On April 9th Myrepublic is supposed to come down to switch my plan to 1gbps with open net. Myrepublic came down first and made the switch but it can't be used because open net still have not switched yet. I waited one while day and when it seems like open net is not coming down, I go into Myrepublic chat to ask them to switch back. The operator told me she will escalate to relevant team. Now is my second day and night, I made a second chat and same reply. For two days no internet. Can someone here just switch me back to 150mbps plan? ID is C1005487
 

ntec66

Senior Member
Joined
Jan 27, 2010
Messages
1,052
Reaction score
0
Got this in the mail today:
...Before we even start moving forward with a MyRepublic 1Gbps installation, we need to submit our order to OpenNet for their processing and approval.

If OpenNet does not give us the OK to proceed for your address, we - as well as any other Singapore internet service provider - are unable to proceed with your installation.

For some cases, OpenNet will not take our orders if there are backend resource limitations affecting certain addresses. Our order would be rejected as invalid.
Appreciate the transparency and updates, more of this please.

Observed OpenNet procedures were not clearly defined. For awareness, refer to the actual ICO Agreement at - ICO Agreement | OpenNet, specifically the following clauses in Schedule 1 on installation procedures:

tcW8MAJ.png

Bk2VmY3.png


Very detailed contract with terms, conditions, SLA. Got time can read and compare for the full picture.
 

Dexter71

Senior Member
Joined
Jul 29, 2000
Messages
524
Reaction score
2
Hi

I just gotten my 1Gps plan installed. I tried a wired speedtest on Mac to gigabit hub and it only returned 95mb/s DL speed which is only <10$% of 1Gbps. I am doing a speed test using a singapore based server. My router is AC56U.

Anything else I need to check?

Thx

Hi

I have connected my mbp to ONT and the router and did speedtest seperately.

Good news is I am getting 900plus DL and 700plus UL speed.:D

Thx
 

xRenol

Supremacy Member
Joined
Dec 27, 2011
Messages
7,243
Reaction score
194
Observed OpenNet procedures were not clearly defined. For awareness, refer to the actual ICO Agreement at - ICO Agreement | OpenNet, specifically the following clauses in Schedule 1 on installation procedures:

tcW8MAJ.png

Bk2VmY3.png


Very detailed contract with terms, conditions, SLA. Got time can read and compare for the full picture.

That means OpenNet can take up to a maximum of 40 days to reject a Request if there is insufficient capacity. When ISPs/RSPs submit another Request, the whole cycle repeats.
 
Status
Not open for further replies.
Important Forum Advisory Note
This forum is moderated by volunteer moderators who will react only to members' feedback on posts. Moderators are not employees or representatives of HWZ Forums. Forum members and moderators are responsible for their own posts. Please refer to our Community Guidelines and Standards and Terms and Conditions for more information.
Top