[Official] Home Automation Thread

dennis91

Member
Joined
May 31, 2007
Messages
288
Reaction score
0
Since eTouch is not produced by Broadlink, what happens when I add it into IHC is it won’t be recognised as a Wall Light Switch RF. I will pair it first with a physical RF remote (80 key, enough for a few hundred frequencies) and set each individual frequency for on and off. Then I will go to the IHC and create the usual User Define Remote (which we have to do for all RF remotes), let RM Pro learn the on/off frequencies and then create a scene using IHC for on/off. It may sound like a lot of work, but by the third switch, I could do it all in slightly under two minutes for each individual gang on each switch.

boss, which is this 80 key remote you are using?
 

Elon Jobs

Senior Member
Joined
Jun 22, 2018
Messages
2,434
Reaction score
1,261
this info is awesome. thanks for sharing. now it makes me feel like switching out all my broadlinks into eTouch switches

It’s quite a heavy outlay if you have multiple switches. I suggest you wait for the TC2 to expire (typically 2 years or 100,000 clicks, whichever comes first). Anyway by that time, there most likely will be cheaper and hopefully, better alternatives. Or perhaps one day Google will be able to recognise something other than just lamps and scenes from Broadlink!
 

Elon Jobs

Senior Member
Joined
Jun 22, 2018
Messages
2,434
Reaction score
1,261
boss, which is this 80 key remote you are using?

It was sold to me by this lady on Carousell when I bought my eTouch switches from her.

http://carousell.com/desireeeeee/

I’m not sure if she sells it separately. You can contact her and ask.
 

earthtk

Senior Member
Joined
Feb 16, 2008
Messages
1,704
Reaction score
4
I was in China and they had a whole floor of home automation in Shenzhen. It just makes our available products v sad.. their home automation stuff quite impressive infact. Including their own assistant.

Sent from Samsung SM-G965F using GAGT
 

Elon Jobs

Senior Member
Joined
Jun 22, 2018
Messages
2,434
Reaction score
1,261
I was in China and they had a whole floor of home automation in Shenzhen. It just makes our available products v sad.. their home automation stuff quite impressive infact. Including their own assistant.

Sent from Samsung SM-G965F using GAGT

It’s not fair to compare a country of 1.4 billion with us, a mere 5 million population. Even if just 1% of China’s population is into HA, it will still outnumber our entire population three to one.
 
Last edited:

earthtk

Senior Member
Joined
Feb 16, 2008
Messages
1,704
Reaction score
4
It’s not fair to compare a country of 1.4 billion with us, a mere 5 million population. Even if just 1% of China’s population is into HA, it will still outnumber our entire population three to one.
That's not what I meant in comparison. Even UK and US are using China stuff for automation. I'm saying China has a lot of stuff which can't be used or not suitable to be used out of China. And those that are available to us from China are only a few.

Sent from Samsung SM-G965F using GAGT
 

Elon Jobs

Senior Member
Joined
Jun 22, 2018
Messages
2,434
Reaction score
1,261
That's not what I meant in comparison. Even UK and US are using China stuff for automation. I'm saying China has a lot of stuff which can't be used or not suitable to be used out of China. And those that are available to us from China are only a few.

Sent from Samsung SM-G965F using GAGT

Sorry I misunderstood your point, but I think in the year 2018, we should no longer be surprised that other countries are using made in China electronics for HA- the iPhone I’m holding right now is made in China and have been for a while now and will be for a long time to come, and HA stuff will be no exception.

The Broadlink devices I’m using are pretty much all made in China as well, but if you’re talking about variety and range of selection, it boils back down to my earlier point- why would distributors bring in so many different models of different brands for a population of 5 million, as compared to a much larger population in China/USA/UK. The critical mass just isn’t there.
 

earthtk

Senior Member
Joined
Feb 16, 2008
Messages
1,704
Reaction score
4
Yeah no issues if no distributor here. Can just buy it on Alibaba or taobao. However it needs to be supported out of China. Plus broadlink from what I see there is kinda like the low end HA due to the range or product it carry.

Sent from Samsung SM-G965F using GAGT
 

Elon Jobs

Senior Member
Joined
Jun 22, 2018
Messages
2,434
Reaction score
1,261
Yeah no issues if no distributor here. Can just buy it on Alibaba or taobao. However it needs to be supported out of China. Plus broadlink from what I see there is kinda like the low end HA due to the range or product it carry.

Sent from Samsung SM-G965F using GAGT

Personally, I’m using the “low end” Broadlink stuff and they are all supported out of China- by my definition, that means the power adapters are all UK type and compatible straight out of the box with our wall sockets, the server the IHC app connects to in the cloud works just fine in Singapore be it on WiFi or 4G network. I bought my Broadlink stuff from the official local distributor and she has done a one for one exchange for my Broadlink WiFi module. That’s pretty good support for a $9.90 piece of electronics in this day and age, wouldn’t you say so?

If you’re talking about high end HA stuff not being supported out of China, I wouldn’t be able to comment since I’m using the low end stuff; but then again, if those high end stuff are only supported within mainland China itself, it doesn’t strike me as very high end anyway.
 
Last edited:

JackDulouz

Supremacy Member
Joined
Aug 12, 2002
Messages
5,432
Reaction score
57
Where did u buy them from? Cos I was thinking of getting the RM Pro to control my KDK fan and Daikin AC..

Personally, I’m using the “low end” Broadlink stuff and they are all supported out of China- by my definition, that means the power adapters are all UK type and compatible straight out of the box with our wall sockets, the server the IHC app connects to in the cloud works just fine in Singapore be it on WiFi or 4G network. I bought my Broadlink stuff from the official local distributor and she has done a one for one exchange for my Broadlink WiFi module. That’s pretty good support for a $9.90 piece of electronics in this day and age, wouldn’t you say so?

If you’re talking about high end HA stuff not being supported out of China, I wouldn’t be able to comment since I’m using the low end stuff; but then again, if those high end stuff are only supported within mainland China itself, it doesn’t strikes me as very high end anyway.
 

argento

Junior Member
Joined
Jul 3, 2003
Messages
16
Reaction score
0
Curtain rails for my Xiaomi Aqara curtain motor arrived!

The good. The rails are silent and look very durable.

The bad, it came with no instructions! I mean seriously, took me over an hour trying to figure out how the thing operates. Assembled it fine but found it would only close properly. Opening had issues.

I disassembled the rails completely to understand how it worked before realizing the belt was not joined to form a continuous loop This was why it could not open properly.

So I rummaging the bubble wrapped bag of screws meant for mounting before spotting what I needed to join the belt.
LOL Noob problem!! :s13: So guys, take note!

Anyway it works!!!

The motor stops when the rails reach the end and can successfully open before stopping once it fully opens.

Another bad thing about the rails was the seller promised custom sizing so I ordered 12 feet in length. However it came in 4 meters. Now I need to dis-assemble it again, cut the rail and belt and hope i get my measurements right, so it all fits nicely again.

I'm sure curtain ppl can do this with their eyes closed, but I doubt they will help as I didn't buy the rails from them. Thankfully, my dad has the cutting tools to make a clean cut on the rails.
BullFrog,
Have you installed the motor/tracks yet and if so hows it working out ? What if you need two tracks ( one set of day curtains and then one to block out the light ), would that be doable as well ( Guessing you would need two tracks and two curtains and some way of joining the two tracks together in parallel ).

Thanks!
 

argento

Junior Member
Joined
Jul 3, 2003
Messages
16
Reaction score
0
I'm can't share links but you can go Carousell and type in Korean Blinds, name of company is shades n shades.

As for the motor, go Lazada and search for zemismart broadlink motorized tube.
Thanks,
This was very helpful. Did you find someone to install them for you or did you do it yourself ? I am not very confident of doing it myself and doing it right.
 

AsusEpoxy

Master Member
Joined
Aug 3, 2003
Messages
3,438
Reaction score
23
anyone managed to link their aqara switches to smartthings hub? i got stuck at the catchall.
 

AsusEpoxy

Master Member
Joined
Aug 3, 2003
Messages
3,438
Reaction score
23
waiting for the shop i bought my fan from to let me know whats my crestar fan RF freq. before i place order for RM-PRO+

don't hold out for it, my friend with a crestar skylite is unable to control with his RM PRO. He told me that it turns out that it is 500+ mhz, different from RF433mhz.
 

Elon Jobs

Senior Member
Joined
Jun 22, 2018
Messages
2,434
Reaction score
1,261
Thanks,
This was very helpful. Did you find someone to install them for you or did you do it yourself ? I am not very confident of doing it myself and doing it right.

The price of the blinds includes installation; if you’re referring to the motor, then watch this link:
https://youtu.be/Z66CwQ6Qpj8

These ones are helpful too:
https://youtu.be/OUYZQ0tBtJ4
https://youtu.be/EkveRgY44Sk

I suggest you buy one to play around first, before ordering for the entire house. And you got to make sure the person making the blinds has the tube for the right size of motor.
 

Errz

Arch-Supremacy Member
Joined
Nov 26, 2002
Messages
12,943
Reaction score
0
don't hold out for it, my friend with a crestar skylite is unable to control with his RM PRO. He told me that it turns out that it is 500+ mhz, different from RF433mhz.

shop came back to me. the fan i bought is 433mhz.
 
Important Forum Advisory Note
This forum is moderated by volunteer moderators who will react only to members' feedback on posts. Moderators are not employees or representatives of HWZ Forums. Forum members and moderators are responsible for their own posts. Please refer to our Community Guidelines and Standards and Terms and Conditions for more information.
Top