[Official] Home Automation Thread

IloveEmma

Senior Member
Joined
Nov 13, 2013
Messages
1,186
Reaction score
0
I've the exact same setup, Xiaomi GW, temperature sensor, Broadlink rm mini (if you don't need RF, use mini instead of pro). However I use Home Assistant to make them work together.

Another way is to go all Xiaomi products, buy Xiaomi IR blaster instead of Broadlink. You should use China server for better device support. I don't know how complicated are your automation but simple ones should be supported in MiHome app.

Wow thanks. I have some RF livolo lights and also ceiling fans which I want to control as well. Can HA make them work together? So basically HA = the hub?

I also have sonos / alexa (but i haven't activate yet). HA also can?

Thanks a lot..
 

viix

Master Member
Joined
Nov 17, 2001
Messages
3,236
Reaction score
2
Wow thanks. I have some RF livolo lights and also ceiling fans which I want to control as well. Can HA make them work together? So basically HA = the hub?

I also have sonos / alexa (but i haven't activate yet). HA also can?

Thanks a lot..

HASS.io is the software, which u can install on various hardware..
 
Last edited:

pustefix

Senior Member
Joined
Feb 6, 2012
Messages
537
Reaction score
10
Wow thanks. I have some RF livolo lights and also ceiling fans which I want to control as well. Can HA make them work together? So basically HA = the hub?

As viix has mentioned, HA is the software, you still need the hub to connect to those Zigbee/Zwave devices. For Xiaomi sensor, you setup using the gateway and Mi Home app, then all your automation can be handled by HA. For wifi devices like RM pro, just connect using the app, then automate with HA. If I am not wrong, HA has one of the best device compatibility for this kind of automation. If it is not compatible yet, someone is most probably working on it. I was involved in helping to turn on support for Xiaomi fan.
 

AsusEpoxy

Master Member
Joined
Aug 3, 2003
Messages
3,438
Reaction score
23
As viix has mentioned, HA is the software, you still need the hub to connect to those Zigbee/Zwave devices. For Xiaomi sensor, you setup using the gateway and Mi Home app, then all your automation can be handled by HA. For wifi devices like RM pro, just connect using the app, then automate with HA. If I am not wrong, HA has one of the best device compatibility for this kind of automation. If it is not compatible yet, someone is most probably working on it. I was involved in helping to turn on support for Xiaomi fan.

you are awesome!
 

pajamasguy

Junior Member
Joined
Sep 28, 2007
Messages
83
Reaction score
0
Hi everyone, I'm new here.
I read with interest the problems some of you guys are facing with the Aqara wall switches (no neutral type)

I have about a dozen Aqara wall switches and using them since CNY 2018 - They do get switch on and switch off quite a lot, even during the daytime. So far I have not encounter any problems and hope it stays that way :)

My system consists mainly of Xiaomi/Aqara stuff. So far all the sensors, etc has been working great for me. Currently I have a total of 62 devices (according to my Mi Home app)

Those of you that had switches burnt and no longer working - I take it that even manually pressing the rockers cant turn on the lights? Where did you all bought them from?
 

IloveEmma

Senior Member
Joined
Nov 13, 2013
Messages
1,186
Reaction score
0
As viix has mentioned, HA is the software, you still need the hub to connect to those Zigbee/Zwave devices. For Xiaomi sensor, you setup using the gateway and Mi Home app, then all your automation can be handled by HA. For wifi devices like RM pro, just connect using the app, then automate with HA. If I am not wrong, HA has one of the best device compatibility for this kind of automation. If it is not compatible yet, someone is most probably working on it. I was involved in helping to turn on support for Xiaomi fan.

Hello.. thanks again for the reply.

"For wifi devices like RM pro, just connect using the app, then automate with HA"

Which app? Is it the hub app or the Mi home app?

Sorry if sound so noob.
 

pustefix

Senior Member
Joined
Feb 6, 2012
Messages
537
Reaction score
10
My system consists mainly of Xiaomi/Aqara stuff. So far all the sensors, etc has been working great for me. Currently I have a total of 62 devices (according to my Mi Home app)

Wow, that is a lot of devices, are you using more than 1 gateway?

"For wifi devices like RM pro, just connect using the app, then automate with HA"
Which app? Is it the hub app or the Mi home app?

For RM pro, it should be the IHC app, basically use the app specified by the manufacturer to connect the device to your WiFi network.
 

freel4ncer

Junior Member
Joined
May 11, 2010
Messages
45
Reaction score
0
Mijia pros, a bit confused

Can i use Alexa purely for voice control over mijia products?

Can i use more xiao ai and alexa at the same time and hook to the same hub?

I understand that aqara can be hooked to mijia

Read somewhere that not all mijia products can be hooked up to alexa (2017)

Saw in mi home app (which logically can connect to alexa) able to add most miji products now, and hence automation
 

MaoZeDuo

Supremacy Member
Joined
Aug 16, 2012
Messages
9,806
Reaction score
66
One of my xm double switch stop working for a few days... i tot uplorry... suddenly its ok again
 

pajamasguy

Junior Member
Joined
Sep 28, 2007
Messages
83
Reaction score
0
Wow, that is a lot of devices, are you using more than 1 gateway?



For RM pro, it should be the IHC app, basically use the app specified by the manufacturer to connect the device to your WiFi network.
Yes two gateways but majority of them are on the main gateway. I think about 47 zigbee devices on my main gateway and less than 10 on the other. The rest are wifi devices
 

AsusEpoxy

Master Member
Joined
Aug 3, 2003
Messages
3,438
Reaction score
23
Hi everyone, I'm new here.
I read with interest the problems some of you guys are facing with the Aqara wall switches (no neutral type)

I have about a dozen Aqara wall switches and using them since CNY 2018 - They do get switch on and switch off quite a lot, even during the daytime. So far I have not encounter any problems and hope it stays that way :)

My system consists mainly of Xiaomi/Aqara stuff. So far all the sensors, etc has been working great for me. Currently I have a total of 62 devices (according to my Mi Home app)

Those of you that had switches burnt and no longer working - I take it that even manually pressing the rockers cant turn on the lights? Where did you all bought them from?

Yours are all non neutral Aqara switches too?
 

AsusEpoxy

Master Member
Joined
Aug 3, 2003
Messages
3,438
Reaction score
23
Yes non neutral type

hmm..good to hear yours still going strong.
For mine, they simply just died. No burns or anything. No marks on pcb too.

I using them way below the 800w per gang specs too. so its really vexing.
Bought online.... there is this local shop called passiongadgets selling too, but they have so many problems with this switch they offer only 7 days warranty instead of the normal warranty for other HA products they bring in. Check out their page with disclaimer....seems that the problem is more common than we think actually. so i guess ur very lucky!
 

MaoZeDuo

Supremacy Member
Joined
Aug 16, 2012
Messages
9,806
Reaction score
66
I tot mine died... i left it alone for a few days then it was working again

hmm..good to hear yours still going strong.
For mine, they simply just died. No burns or anything. No marks on pcb too.

I using them way below the 800w per gang specs too. so its really vexing.
Bought online.... there is this local shop called passiongadgets selling too, but they have so many problems with this switch they offer only 7 days warranty instead of the normal warranty for other HA products they bring in. Check out their page with disclaimer....seems that the problem is more common than we think actually. so i guess ur very lucky!
 

AsusEpoxy

Master Member
Joined
Aug 3, 2003
Messages
3,438
Reaction score
23
I tot mine died... i left it alone for a few days then it was working again

mine doesnt resurrect like yours cos i waited a few weeks cos need time to order new switch. But even if it works again, that still speaks volumes of its reliability.
 
Joined
May 11, 2017
Messages
62,282
Reaction score
11,756
don't buy yale locks

the absalloy doesn't support smart devices. taiji all the way. if the digital lock has finger print as entrance pw, it doesn't trigger the zwave device. they are still in la la land
 

9N1Y9N1Y

Senior Member
Joined
Mar 9, 2007
Messages
612
Reaction score
0
anyone come across padlock that can be unlock from app without bluetooth?
Looking for something to lock my gate such that i can unlock when courier call so that they can leave my bigger parcel inbetween the wooden door and gate.
 

AsusEpoxy

Master Member
Joined
Aug 3, 2003
Messages
3,438
Reaction score
23
don't buy yale locks

the absalloy doesn't support smart devices. taiji all the way. if the digital lock has finger print as entrance pw, it doesn't trigger the zwave device. they are still in la la land

so that means even if the lock supports z-wave, its moot? doesn't make sense
 
Important Forum Advisory Note
This forum is moderated by volunteer moderators who will react only to members' feedback on posts. Moderators are not employees or representatives of HWZ Forums. Forum members and moderators are responsible for their own posts. Please refer to our Community Guidelines and Standards and Terms and Conditions for more information.
Top