Official MIO TV Thread.......

[renfred89]

Basically it would not work.
Set top box require an assigned IP Address to the subscriber ONR/ONT connect to.
It is not an independent setup as cable set top box and android type box.

indeed. however if one has subscribed to singtel tv, any singtel issued equipment hooked onto the singtel tv network should work. I don't think the network will differentiate between devices

 

[ah_cleo]

i am thinking to try to use singtel router, hook up 2 mio tv setup box. not sure if it works.

 

[renfred89]

i am thinking to try to use singtel router, hook up 2 mio tv setup box. not sure if it works.

Of cos not. One set TOP box, one account, one IP address.

You want another set TOP box you have to rent from singtel again..

 

[eric3743]

i am thinking to try to use singtel router, hook up 2 mio tv setup box. not sure if it works.

Of cos not. One set TOP box, one account, one IP address.

You want another set TOP box you have to rent from singtel again..

Beside i think it connect by subscriber address.

 

[ah_cleo]

i previously was using motorola silver setup box.. my asus ac3200 is very sure now that on singtel-others and on port 4 but it is not working anymore..

change to the black cisco setup box also cannot. tried with singtel router. it can work.

both setup box and router are newly RMA.. ZZZ

anyone can help?

 

[5star_pundit]

I am already a MIO tv subscriber. any picture in picture TV to recommend ?? I wanna watch 2 epl matches at the same time

 

[renfred89]

Anyway using asus ac3200 cant get mio tv to start?

Tried with singtel router ok?

I am on port 4 and isp setting done liao leh.

Restarted router and set TOP box still the same?

 

[ah_cleo]

Restarted router and set TOP box still the same?

yes i even off ONT, unplug power, wait 3 minutes, turn on til all led on.. turn on router.. fully stable, turn on setup box. same..

stuck at almost done..make sure modem is connect blah blah blah

 

[renfred89]

yes i even off ONT, unplug power, wait 3 minutes, turn on til all led on.. turn on router.. fully stable, turn on setup box. same..

stuck at almost done..make sure modem is connect blah blah blah

Did I apply correctly the settings? As in using SingTel-others and confirm plugged into port 4? I had ac3200 and used singtel tv also, confirm can work one leh..

 

[ah_cleo]

Did I apply correctly the settings? As in using SingTel-others and confirm plugged into port 4? I had ac3200 and used singtel tv also, confirm can work one leh..

yes i confirmed is plug into port 4 and use singtel-others profile.

now i begining to believe the installer words that there is firmware upgrade.

quick check. u on Motorola(silver) or cisco(Black) setup box.

 

[renfred89]

yes i confirmed is plug into port 4 and use singtel-others profile.

now i begining to believe the installer words that there is firmware upgrade.

quick check. u on Motorola(silver) or cisco(Black) setup box.

Was on the silver Motorola, tried resetting the set TOP box? It will lead you to a firmware reinstallation...

 

[ah_cleo]

How to do it ah?

 

[renfred89]

How to do it ah?

Repeatedly press and hold the power button until the gear icon appears on your tv..

 

[ah_cleo]

managed to solve my issue. but thing is i did 2 things. not which did did. last nite press and hold power button for my cisco setup box. went to some testing page etc. today, instead of using singtel-others profile, i tried singtel-mio. now working very well.

 

[renfred89]

managed to solve my issue. but thing is i did 2 things. not which did did. last nite press and hold power button for my cisco setup box. went to some testing page etc. today, instead of using singtel-others profile, i tried singtel-mio. now working very well.

Then it’s the firmware issue for ac3200 lor. SingTel-mio uses port 3 for voip and port 4 for singtel tv.. likely need a reset of router to address reliability issue..

 

[elimmel]

My black Cisco STB won’t boot up properly. Stays at red power button with no signal to TV. Tried the press and hold reboot but nothing happens. Power off/on also doesn’t work.
Other 2 STB in the house no issues.
ST taking their own sweet time getting back to me.

 

[renfred89]

My black Cisco STB won’t boot up properly. Stays at red power button with no signal to TV. Tried the press and hold reboot but nothing happens. Power off/on also doesn’t work.
Other 2 STB in the house no issues.
ST taking their own sweet time getting back to me.

got a picture?

try turning the power adapter off, then press and hold the power button when turning the switch on. repeats until you see the gear icon on tv..

 

[elimmel]

No picture at all. Will try your method when I get home

 

[elimmel]

Doesn’t work. ST got back to me and asked me to bring back for 1-1 exchange

 

[renfred89]

Doesn’t work. ST got back to me and asked me to bring back for 1-1 exchange

I see. No tech come down do 1-1 replacement?