PC chassis cleaning

[ragnarok95]

Used until song song till now. Nothing happen for my 4 sets of pc.

Sure, u use on free spinning fans for 4 sets. Then you can continue to damage your system.

 

[yukita]

i seldom clean my pc, because i seldom use it.
but for my Synology NAS which always on, a couple months ago, i clean it, basically taking it out and use brush to clean the dust. after plug it back, and turn ON, the NAS beeping fan error end up took my old S-Flex fan which has sony bearing and replace it. had to tune the fan setting to quiet, else will be too fast.

Not sure what killed the fan. i thought fan seldom spoil.

 

[abstrax]

Sure, u use on free spinning fans for 4 sets. Then you can continue to damage your system.

If spoilt just change, fans dun cost much too. Fans normally last a few yrs b4 start to wear out.

 

[ragnarok95]

If spoilt just change, fans dun cost much too. Fans normally last a few yrs b4 start to wear out.

lol. Its not about the fans.

 

[starlust]

switch to laptop..dust not so glaring..

 

[Jurong640]

switch to laptop..dust not so glaring..

haha it happened. I saw red lights on my motherboard.


End up, i didn't attach the GPU cables back

 

[tigerwoods]

switch to laptop..dust not so glaring..

i always pray after clean up

 

[Phen8210]

chey i thought u wan provide free service, turns out ask for

 

[Vanyel]

chey i thought u wan provide free service, turns out ask for

I ownself hate cleaning up my own rigs already lol

Free assembly help maybe still got motivation haha

 

[KleoZy]

I ownself hate cleaning up my own rigs already lol

Free assembly help maybe still got motivation haha

Just dump into a bucket of distill water, shake shake up and down.. pull out hang and let it dry, then spray isopropyl alcohol 99%, run down where the bottom have another bucket to catch the alcohol, like squeezing sugar cane juice like that.. as in a repeat cycle, till you see no black black stop. let dry or alcohol evaporates.
once done, final touch. spray one layer of Jackie Spray 60 to your entire system... let it dry. you can start to use it as per normal the next day.

 

[TanKianW]

How does everyone clean their fans ar?
I generally take a damp coth and use index finger slowly wiggle the blades one by one
Tedious process

I use an air compressor, attached to hose and air gun. Strong and effective. For home use can get a smaller one. If need detailing then I use a disposable cloth with 99% IPA.

If you blow every 1-2 months (subject to deploy locations and environment), you dun really need a wipe down.​

 

[Vanyel]

somehow coincidentally this popped up on my youtube feeds

 

[PES1989]

https://forums.hardwarezone.com.sg/threads/pc-rig-building-upgrade-again.7111202/

I bought the same case as you but I airship over. Delivered this afternoon. I unboxed just now but got shocked that my case the aluminium part got dented badly. Llst have to settle with the seller...

 

[fkchon]

just air blow every week good enough

 

[Vanyel]

I bought the same case as you but I airship over. Delivered this afternoon. I unboxed just now but got shocked that my case the aluminium part got dented badly. Llst have to settle with the seller...

taobao also?
was the outer carton ok?

 

[PES1989]

taobao also?
was the outer carton ok?

Yup Taobao. Tempered glass never break. The internal case quite oily. I noticed some of the rivet screws/bolts/nuts came off. The outer carton can see is not in good condition...

 

[Vanyel]

Yup Taobao. Tempered glass never break. The internal case quite oily. I noticed some of the rivet screws/bolts/nuts came off. The outer carton can see is not in good condition...

suggest u apply refund for the whole thing and see how the shop responds

 

[PES1989]

suggest u apply refund for the whole thing and see how the shop responds

The shop said will try to send me 2 replacement parts for the rear and side which is more seriously dented. Top & side they asked me to hammer it straight then can use already...

I tried applying for refund, but I will get partial refund which will result in me lugi the $80+. They managed to send the correct qty for the normal (concave) fans & reverse blade (convex) fans.