Pioneer Plasma Thread

mingj

Master Member
Joined
Jan 1, 2000
Messages
3,265
Reaction score
23
For those who are interested....

Wooohooo, I managed to enable my isf-day, isf-night and isf-auto on my KRP :) (Using Kuro Control).... Currently using some reference setting from AVSForum.... PQ Not bad.... not bad at all.. Significant ?? Not really but do seem better.

Personally Reference Pure setting is still a bit too bright for me.... currently using isf-night for both day and night watching.
 
Last edited:

petetherock

Moderator
Moderator
Joined
Jan 7, 2007
Messages
10,153
Reaction score
1,108
For those who are interested....

Wooohooo, I managed to enable my isf-day, isf-night and isf-auto on my KRP :) (Using Kuro Control).... Currently using some reference setting from AVSForum.... PQ Not bad.... not bad at all.. Significant ?? Not really but do seem better.

Personally Reference Pure setting is still a bit too bright for me.... currently using isf-night for both day and night watching.

Good, maybe you can share who did your ISF calibration, cheers.
 

mingj

Master Member
Joined
Jan 1, 2000
Messages
3,265
Reaction score
23
Good, maybe you can share who did your ISF calibration, cheers.

I used one of the ISF reference setting used by one of the avsforums forumer who engaged D-Nice (from AVSForums)to calibrate. True it is not real calibration as he did not do it physically. But it better then nothing..

Local Calibration do not seem possible as it seem that no one is doing it ... I check with pioneer and some of its authorised venders.
 

petetherock

Moderator
Moderator
Joined
Jan 7, 2007
Messages
10,153
Reaction score
1,108
I used one of the ISF reference setting used by one of the avsforums forumer who engaged D-Nice (from AVSForums)to calibrate. True it is not real calibration as he did not do it physically. But it better then nothing..

Local Calibration do not seem possible as it seem that no one is doing it ... I check with pioneer and some of its authorised venders.

Bro share the settings then... cheers
 

mingj

Master Member
Joined
Jan 1, 2000
Messages
3,265
Reaction score
23
Bro share the settings then... cheers

Sure no prob..

Pioneer Kuro Settings
Date & Time : 10/05/2010 21:52:06
Model : KRP-600M

Input & Screen
Input : 5 (HDMI 1)
Input Signal: *********/***.*
Input Setup : Video/RGB16-235
Screen Size : FULL or FULL1080i

Picture
AV Selection: ISF-Night
Contrast : 24
Brightness : 1
Color : 6
Tint : 0
Sharpness : -15
Color Temp : Manual
Red High : 0
Green High : 0
Blue High : 8
Red Low : -1
Green Low : 1
Blue Low : 0
Gamma : 3 (ISF 9 Point Gamma in use)

ISF Gamma 1 2 3 4 5 6 7 8 9
Red : -2 -2 -2 -3 -3 -3 -3 -3 -3
Green : -2 -2 -2 -3 -3 -3 -3 -3 -3
Blue : -2 -2 -2 -3 -3 -3 -3 -3 -3

ISF Gamma |1|2|3|4|5|6|7|8|9
Red |-2|-2|-2|-3|-3|-3|-3|-3|-3
Green |-2|-2|-2|-3|-3|-3|-3|-3|-3
Blue |-2|-2|-2|-3|-3|-3|-3|-3|-3

Pure Cinema
Film Mode : Advance
Text Optimization: Off

Intelligent Mode: Off

Picture Detail
DRE Picture : Off
Black Level : Off
ACL : Off
Enhancer Mode: Hard

Color Detail
CTI: Off
Color Management
R (RED) : 0
Y (YELLOW) : 2
G (GREEN) : -2
C (CYAN) : 0
B (BLUE) : 0
M (MAGENTA): 0
Color Space : 2

Noise Reduction
3DNR : Off
Field NR : Off
Block NR : Off
Mosquito NR: Off

Other
3DYC : Middle
IP Mode : 2 (Standard)
Drive Mode : 1 (75Hz)
Game Control : Off
Blue Only Mode: Off

Power & Options
Energy Save Mode : Save1
Room Light Sensor: On


--------------------------------------------------------------------------------

Pioneer Kuro Settings
Date & Time : 10/05/2010 21:54:26
Model : KRP-600M

Input & Screen
Input : 5 (HDMI 1)
Input Signal: 1080P/60.0
Input Setup : Video/RGB16-235
Screen Size : FULL or FULL1080i

Picture
AV Selection: ISF-Day
Contrast : 36
Brightness : 1
Color : 6
Tint : 0
Sharpness : -15
Color Temp : Manual
Red High : -2
Green High : 0
Blue High : 8
Red Low : -1
Green Low : 1
Blue Low : 0
Gamma : 3 (ISF 9 Point Gamma in use)

ISF Gamma 1 2 3 4 5 6 7 8 9
Red : -2 -2 -2 -2 -3 -3 -3 -3 -3
Green : -2 -2 -2 -2 -3 -3 -3 -3 -3
Blue : -2 -2 -2 -2 -3 -3 -3 -3 -3

ISF Gamma |1|2|3|4|5|6|7|8|9
Red |-2|-2|-2|-2|-3|-3|-3|-3|-3
Green |-2|-2|-2|-2|-3|-3|-3|-3|-3
Blue |-2|-2|-2|-2|-3|-3|-3|-3|-3

Pure Cinema
Film Mode : Advance
Text Optimization: Off

Intelligent Mode: Off

Picture Detail
DRE Picture : Off
Black Level : Off
ACL : Off
Enhancer Mode: Hard

Color Detail
CTI: Off
Color Management
R (RED) : 0
Y (YELLOW) : 2
G (GREEN) : -2
C (CYAN) : 0
B (BLUE) : 0
M (MAGENTA): 0
Color Space : 2

Noise Reduction
3DNR : Off
Field NR : Off
Block NR : Off
Mosquito NR: Off

Other
3DYC : Middle
IP Mode : 2 (Standard)
Drive Mode : 1 (75Hz)
Game Control : Off
Blue Only Mode: Off

Power & Options
Energy Save Mode : Save1
Room Light Sensor: On


--------------------------------------------------------------------------------

Pioneer Kuro Settings
Date & Time : 10/05/2010 21:55:01
Model : KRP-600M

Input & Screen
Input : 5 (HDMI 1)
Input Signal: 1080P/60.0
Input Setup : Video/RGB16-235
Screen Size : FULL or FULL1080i

Picture
AV Selection: ISF-Auto
Contrast : 36
Brightness : 1
Color : 6
Tint : 0
Sharpness : -15
Color Temp : Manual
Red High : -2
Green High : 0
Blue High : 8
Red Low : -1
Green Low : 1
Blue Low : 0
Gamma : 3 (ISF 9 Point Gamma in use)

ISF Gamma 1 2 3 4 5 6 7 8 9
Red : -2 -2 0 -2 -3 -3 -3 -3 -3
Green : -2 -2 0 -2 -3 -3 -3 -3 -3
Blue : -2 -2 0 -2 -3 -3 -3 -3 -3

ISF Gamma |1|2|3|4|5|6|7|8|9
Red |-2|-2|0|-2|-3|-3|-3|-3|-3
Green |-2|-2|0|-2|-3|-3|-3|-3|-3
Blue |-2|-2|0|-2|-3|-3|-3|-3|-3

Pure Cinema
Film Mode : Advance
Text Optimization: Off

Intelligent Mode: Off

Picture Detail
DRE Picture : Off
Black Level : Off
ACL : Off
Enhancer Mode: Hard

Color Detail
CTI: Off
Color Management
R (RED) : 0
Y (YELLOW) : 2
G (GREEN) : -2
C (CYAN) : 0
B (BLUE) : 0
M (MAGENTA): 1
Color Space : 2

Noise Reduction
3DNR : Off
Field NR : Off
Block NR : Off
Mosquito NR: Off

Other
3DYC : Middle
IP Mode : 2 (Standard)
Drive Mode : 1 (75Hz)
Game Control : Off
Blue Only Mode: Off

Power & Options
Energy Save Mode : Save1
Room Light Sensor: On


--------------------------------------------------------------------------------
 

athenaesword

Master Member
Joined
Mar 11, 2007
Messages
3,419
Reaction score
0
The last i check (ard 1 month back) there are still Pioneer Plasma avalible for sale... you need to go to Pioneer Showroom. :) not those HN/BD outlet...

hey thanks for sharing. may i know where this pioneer showroom is?
 

mingj

Master Member
Joined
Jan 1, 2000
Messages
3,265
Reaction score
23
hey thanks for sharing. may i know where this pioneer showroom is?

You can try either

Pioneer Gallery
Merdeka Audio Pte Ltd #01-51/52 Sim Lim Square
Tel: 6337-3737

Pioneer Gallery
Seng Heng Electrical Trading #01-02 The Adelphi
Tel: 6338-4111

The one i ask is Pioneer Gallery @ The Adelphi
 

isaac9

Member
Joined
Sep 11, 2000
Messages
422
Reaction score
0
Was walking around @ BD Vivocity yesterday and saw a last display set Pioneer Kuro 50inch FHD plasma selling @ $2999
 

athenaesword

Master Member
Joined
Mar 11, 2007
Messages
3,419
Reaction score
0
You can try either

Pioneer Gallery
Merdeka Audio Pte Ltd #01-51/52 Sim Lim Square
Tel: 6337-3737

Pioneer Gallery
Seng Heng Electrical Trading #01-02 The Adelphi
Tel: 6338-4111

The one i ask is Pioneer Gallery @ The Adelphi

thanks for the heads up.. will try out those places
 

mingj

Master Member
Joined
Jan 1, 2000
Messages
3,265
Reaction score
23
Not sure if any one try this

I have a KPR running for slightly less then 300 hrs.

I display a 0 IRE ( 0% stimulus (16,16,16) )Image from my PC and stream to Kuro (via My PC using PS3Media Server). I could see a dark gray glow.... not Inky BLACK which i am expecting.


I let the image sit for around 15 sec.
The image i used is from http://72.9.159.100/avs-vb/attachment.php?attachmentid=168986&d=1267742107

As for the room setup it is almost black with some lights from stars and nearby flats.....as i did the testing during the night..


Am i expecting too much?Or is my KPR flawed?

Settings:
Bluray Device: PS3
Input : Video RGB/Limited

AVR: Denon 1909
HDMI Input: RGB/ Normal (RGB16-235)
 

mingj

Master Member
Joined
Jan 1, 2000
Messages
3,265
Reaction score
23
Not sure if any one try this

I have a KPR running for slightly less then 300 hrs.

I display a 0 IRE ( 0% stimulus (16,16,16) )Image from my PC and stream to Kuro (via My PC using PS3Media Server). I could see a dark gray glow.... not Inky BLACK which i am expecting.


I let the image sit for around 15 sec.
The image i used is from http://72.9.159.100/avs-vb/attachment.php?attachmentid=168986&d=1267742107

As for the room setup it is almost black with some lights from stars and nearby flats.....as i did the testing during the night..


Am i expecting too much?Or is my KPR flawed?

Settings:
Bluray Device: PS3
Input : Video RGB/Limited

AVR: Denon 1909
HDMI Input: RGB/ Normal (RGB16-235)

Anyone tied it ????
 
Important Forum Advisory Note
This forum is moderated by volunteer moderators who will react only to members' feedback on posts. Moderators are not employees or representatives of HWZ Forums. Forum members and moderators are responsible for their own posts. Please refer to our Community Guidelines and Standards and Terms and Conditions for more information.
Top