Proposal Ring - Part 3

[hithere1]

The diamond I am looking at has a cloud and feather inclusion

Where can I get the report that shows the diagram of the diamond's top and pavilion view, that shows the inclusion?

 

[Miltah]

The diamond I am looking at has a cloud and feather inclusion

Where can I get the report that shows the diagram of the diamond's top and pavilion view, that shows the inclusion?

GIA has many types of report. It cost cheaper without the inclusion plots.
If the report does not have it, then u can’t really ask for it unless u send it for re-grading at your cost. But I wouldn’t worry since it’s a jp stone

 

[ivandemi]

JP Octagon is even better than the SIC. When you compare the Octagon with the SIC, its actually higher performing.

There is more interest settings you can do with the octagon too. Something like this.

This is mine

Octagon is the only true cut and designed by JP in the entire world, if u wanna go something unique and yet as close to the classic round and outperform the SIC, go for that. Or the cushion Brellia is another one if you are more daring.

 

[Zeion5]

Hi bros, have been reading this thread for the longest time, got scope images of a diamond I wanted, although it took 4 weeks to arrive.. not too happy with the wait.

Could anyone please give comments?
imgur.com/a/G9j2axm

Sry, do not have enough post counts to post images.

 

[mrashford86]

Uploaded for you. JP Super ideal cut right? Looks great bro. What specs?

 

[hithere1]

GIA has many types of report. It cost cheaper without the inclusion plots.
If the report does not have it, then u can’t really ask for it unless u send it for re-grading at your cost. But I wouldn’t worry since it’s a jp stone

thank you Miltah, never knew there were different GIA reports

I guess I should be reassured it's a JP SIC, and seeing so many happy customers here after purchasing it

 

[schattenjaeger]

Hi all,
I’m shopping for a proposal ring, and I’m afraid I’m really noob at this.
After reading through some of your post, I’m curious a# to what Is the price range like for a SIC from JP, around 0.6-0.8 ct?

Thx

 

[hithere1]

Hi all,
I’m shopping for a proposal ring, and I’m afraid I’m really noob at this.
After reading through some of your post, I’m curious a# to what Is the price range like for a SIC from JP, around 0.6-0.8 ct?

Thx

past prices from this thread

0.60 E, VS1, $5400
0.60 D VS1 $5300
0.62 E VVS2 $5600
0.74 G VVS2 $6800
0.72 F, VS1, $7000
0.73 F VVS2 $7200
0.76 G VS1 $7200
0.77 G VVS2 $7700
0.78 E VS1 $8100
0.82 G VS2 $8450
0.83 F, VS1, $9300

 

[schattenjaeger]

past prices from this thread

0.60 E, VS1, $5400
0.60 D VS1 $5300
0.62 E VVS2 $5600
0.74 G VVS2 $6800
0.72 F, VS1, $7000
0.73 F VVS2 $7200
0.76 G VS1 $7200
0.77 G VVS2 $7700
0.78 E VS1 $8100
0.82 G VS2 $8450
0.83 F, VS1, $9300

Thanks! I got a better idea now

 

[kopiboysean]

These are my pictures of my octagon being crafted. Super recommend Avery from JP. You can specifically book who you want in JP. Just say in the email whu you want. I asked her if I can see any photos of my ring when putting the diamond in for my wedding portfolio. She helped far and beyond and realli went the extra mile to help in my whole diamond buying.

Super excited!

 

[wlchow1985]

Hi, just general enquiries..

1) JannPaul only carrys SIC and HOH carrys ideal cut?
2) will HOH ideal cut be better than those chain store like Lee Hwa and SK signature cut etc..?

 

[bbqbeans]

Hey guys,

I've been looking through this thread these few days.

Looking to propose to my gf soon and I've seen a few post on rings prices less than $3K.


Also saw that Jann Paul seems to be the popular choice here.

I was doing some googling and also found Poh Kim jewellery (apparently quite affordable)

I have a low budget of of max $2.5K (finances really tight).

Would it be possible to get something about 0.4 to 0.5 Carat , color D or E in princess cut.

Thank you for all good advices .

 

[Miltah]

Hi, just general enquiries..

1) JannPaul only carrys SIC and HOH carrys ideal cut?
2) will HOH ideal cut be better than those chain store like Lee Hwa and SK signature cut etc..?

1. Yes
2. Most likely. Lee Hwa will up sell AGS 000 certs as top of the line but won’t show u any scopes. Not familiar with SK line. At least with Gold Heart u can still check out their 73 facets celestial range

 

[Miltah]

Hey guys,

I've been looking through this thread these few days.

Looking to propose to my gf soon and I've seen a few post on rings prices less than $3K.


Also saw that Jann Paul seems to be the popular choice here.

I was doing some googling and also found Poh Kim jewellery (apparently quite affordable)

I have a low budget of of max $2.5K (finances really tight).

Would it be possible to get something about 0.4 to 0.5 Carat , color D or E in princess cut.

Thank you for all good advices .

Are u sure u want princess cut?
It’s cheaper purely because there’s less wastage when cutting.

 

[ThiamWan]

These are my pictures of my octagon being crafted. Super recommend Avery from JP. You can specifically book who you want in JP. Just say in the email whu you want. I asked her if I can see any photos of my ring when putting the diamond in for my wedding portfolio. She helped far and beyond and realli went the extra mile to help in my whole diamond buying.

Super excited!

Nice pics. It’ll be cool if you can get them to do a video too.

 

[ThiamWan]

Hey guys,

I've been looking through this thread these few days.

Looking to propose to my gf soon and I've seen a few post on rings prices less than $3K.


Also saw that Jann Paul seems to be the popular choice here.

I was doing some googling and also found Poh Kim jewellery (apparently quite affordable)

I have a low budget of of max $2.5K (finances really tight).

Would it be possible to get something about 0.4 to 0.5 Carat , color D or E in princess cut.

Thank you for all good advices .

If u wanna go princess might as well go for brellia or octagon from JP, they are all sic standard hna. Princess is really dull and fire is so small it’s barely noticable from far. Worst of all it’s the most prone to chipping. Unless die die you want square square sharp.

 

[bbqbeans]

Are u sure u want princess cut?
It’s cheaper purely because there’s less wastage when cutting.

Yes . She was the one who told me she like Princess Cut . Personally I dun feel that princess cut is very nice.

 

[bbqbeans]

Wow sounds like princess is really not so ideal huh.

 

[wlchow1985]

Thanks Miltah!

I just came back from JannPaul.. Their service and diamond quality is really top notch.. The price is very fair also.. Much cheaper for what other chain stores quoted me without detailed scope images.

I got myself a SIC round 0.44carat F VS1 for 2850.
Setting at 550. Got bit of discount cuz I went together with my friend and both of us placed deposit. Happy buyer here!

1. Yes
2. Most likely. Lee Hwa will up sell AGS 000 certs as top of the line but won’t show u any scopes. Not familiar with SK line. At least with Gold Heart u can still check out their 73 facets celestial range

 

[aloeve]

Tian po jewellery at centrepoint or chinatown got discount.