Proposal Ring - Part 4

[coldwinter00]

Guys & Pros, what size of diamond can I get at JP with 10k budget?

 

[hisGRIMness]

Guys & Pros, what size of diamond can I get at JP with 10k budget?

0.8. Maybe 0.9 if G colour.

 

[beermachine]

Need help. Does any bros here have the Oval hearts and arrows in the 0.6ct range reserved from JP? The one from there white series collection. I need my ring in 1 month and they do not have any available in stock. Seems like their ovals in the 0.5-0.6ct range has been sold out. If anyone has an oval 0.6ct on reserve, can pass it to me? I'm willing to pay abit more for what you've paid for it. Pls PM me

 

[coldwinter00]

0.8. Maybe 0.9 if G colour.

Thanks. how much will it cost for 1 ct decagon diamond

 

[Thanksall]

Hi all, appreciate if anyone can share if this decagon is worth getting and if there is any quality issue. Thanks in advance.

AGS 104112654080

 

[HansenDeHardwarezone]

Hi all, appreciate if anyone can share if this decagon is worth getting and if there is any quality issue. Thanks in advance.

AGS 104112654080

very good. only tiny pinpoints on the bottom, which very normal. hummm...not sure you confirm the strong or not, just a personal suggestion...since you already at sic, and in vvs range, maybe you can consider downgrade the colour and make sure for ct? d colour not visible difference for a 0.4 ct diamond.

 

[Thanksall]

very good. only tiny pinpoints on the bottom, which very normal. hummm...not sure you confirm the strong or not, just a personal suggestion...since you already at sic, and in vvs range, maybe you can consider downgrade the colour and make sure for ct? d colour not visible difference for a 0.4 ct diamond.

Hi, thanks for the suggestion and wil certainly consider it. Other than this, I was actually concerned about its proportions as it appeared smaller when compared with a Round 10 and Round SIC of similar ct. Hence, wonder if there is anything wrong with its proportions. Planning to make it into an ear stud.

 

[chesterchew]

Hi, thanks for the suggestion and wil certainly consider it. Other than this, I was actually concerned about its proportions as it appeared smaller when compared with a Round 10 and Round SIC of similar ct. Hence, wonder if there is anything wrong with its proportions. Planning to make it into an ear stud.

Wow. 0.41 D VVS1. That's a high spec. The White Series cut with superior brightness than the SIC already. So I feel it might not be necessary to go for a high Color. I've seen even the G Color looks very bright and white. But that's just a personal preference. Though a D VVS1 combo can giving you more bragging rights

The Decagon measurements is different from the rounds. The cert measures the tip to tip length and flat to flat length. The tip to tip length would be similar to the rounds.

 

[Thanksall]

Wow. 0.41 D VVS1. That's a high spec. The White Series cut with superior brightness than the SIC already. So I feel it might not be necessary to go for a high Color. I've seen even the G Color looks very bright and white. But that's just a personal preference. Though a D VVS1 combo can giving you more bragging rights

The Decagon measurements is different from the rounds. The cert measures the tip to tip length and flat to flat length. The tip to tip length would be similar to the rounds.

Haha not for bragging for sure . Wil certainly consider lower colour as long it looks right. Btw, is the table, depth etc of this piece acceptable? Thanks for the clarifying on how Decagon was measured.

 

[HansenDeHardwarezone]

Hi, thanks for the suggestion and wil certainly consider it. Other than this, I was actually concerned about its proportions as it appeared smaller when compared with a Round 10 and Round SIC of similar ct. Hence, wonder if there is anything wrong with its proportions. Planning to make it into an ear stud.

Haha not for bragging for sure . Wil certainly consider lower colour as long it looks right. Btw, is the table, depth etc of this piece acceptable? Thanks for the clarifying on how Decagon was measured.

the cut for decagon white series was new and unique in the market. can not use the usual round diamond table:depth ration to evaluate decagon cut. light performance is the key for white series. personally i trust jp’s work. like majority of the bros here. anyway, can go back to normal round sic range, which already then most of the diamonds in market. and will save you 5-10%.

 

[Thanksall]

the cut for decagon white series was new and unique in the market. can not use the usual round diamond table:depth ration to evaluate decagon cut. light performance is the key for white series. personally i trust jp’s work. like majority of the bros here. anyway, can go back to normal round sic range, which already then most of the diamonds in market. and will save you 5-10%.

Great, I trust their work too n agree on the quality especially on their decagons.

 

[freewilly5000]

Haha not for bragging for sure . Wil certainly consider lower colour as long it looks right. Btw, is the table, depth etc of this piece acceptable? Thanks for the clarifying on how Decagon was measured.

Actually, they have a indepth video about the Decagon and how it's cut. And they also got say it will look much brighter for its color grade.

 

[fliggy]

Hi all, really appreciate if anyone can help on whether this one is worth getting: GIA 2374737740, 1.91ct G VS1, HCA 1.2. Seems not many inclusions on the report but it is graded VS1, so I guess I am missing something Thanks in advance!

 

[baracrat]

haha thanks for the welcome!

the fiancee was pleased with it. the decagon was worth it!

just got to go resize the ring.

specs are

AGS Ideal 0
0.751 cts
F
VVS2

$7.7k for stone and $550 for ring
total $8.25k

hello hello.

my confirmed diamond is of similar specs and is existing stock. now waiting for 3D rendering of the ring.

how long did you have to wait for the 3D render of your ring?

And after getting the 3D render, how long did u wait for the completed ring to be ready for collection?

Thanks!

 

[HansenDeHardwarezone]

Hi all, really appreciate if anyone can help on whether this one is worth getting: GIA 2374737740, 1.91ct G VS1, HCA 1.2. Seems not many inclusions on the report but it is graded VS1, so I guess I am missing something Thanks in advance!

severity level of inclusion is another important factor here. you need to take a closer look for that needle. by the way, noticed the this is a diamond with faint fluorescence, if you aware?

 

[pinkybooboo]

Does Anyone have a comparison of Poh Kim vs JP ??

can someone also quote 0.6-0.7 decagon white series price range?? Thanks!

 

[Luc777]

hello hello.

my confirmed diamond is of similar specs and is existing stock. now waiting for 3D rendering of the ring.

how long did you have to wait for the 3D render of your ring?

And after getting the 3D render, how long did u wait for the completed ring to be ready for collection?

Thanks!

mine quite chill sia. simi 3d rendering also bo
basically walked in day one for tutorial. day two buy ring then just wait to collect nia. lol.

 

[Fallenstar3d]

Does Anyone have a comparison of Poh Kim vs JP ??

can someone also quote 0.6-0.7 decagon white series price range?? Thanks!

my one was round 10
0.63-0.66, F/G, Vvs1-vvs2, $5200-$6000

if it helps.

 

[pinkybooboo]

my one was round 10
0.63-0.66, F/G, Vvs1-vvs2, $5200-$6000

if it helps.

Thanks!!

 

[baracrat]

Proposed to my gf liao Sharing my ring pics!
Special thanks to Avery for being very patient with us. There were just too many choices and all their White Series cuts have their own unique points. We changed our deposit afew times and chose their White Series Round 10. We visited their store 6 times in total to discuss about our diamond and design. Throughout the whole process, Avery was very accommodating and giving us good advice. She was even replying our whatsapp msges at 3am.. Didn't expect this at all, but am amazed by her dedication.

My diamond is a 1.05 G VVS2 White Series Round 10. It's a custom cut order that was suppose to be a F-G, VS1-VS2. The clarity turned out higher than expected so we got a free clarity upgrade If you can wait to custom cut your diamond, it's worth the wait.

Our initial concern was the rose gold crown head. Cos we read that rosegold rings can affect the diamond color. My gf wanted some rose gold elements, while keeping the base white. Avery assured us that the rose gold crown has been done before on other white series cut and it was fine. Their white series light return is much higher than even the SICs. So it won't see through the diamond to the rose gold.

Here's a pic from the front. Diamond still look very white In fact, some of her friend's even thought it was a ''D'' Color. Glad we followed Avery's suggestions.

This is with some morning sun shining on the diamond. Can see the sparkles of the diamond reflecting on the table. I think because the diamond is so bright and sparkly, it makes it look bigger than expected. I've seen my other friends 1ct rings before but don't rem them looking this big. Or maybe I'm just seeing what I want to see

Congrats!! I am also being served by Avery, definitely agree with you on her fantastic customer service.

I am currently waiting for the 3D render of the ring. How long was your entire process? Thanks!