R/C Hobbyist thread

[Revolution]

eh max, this is my find at redhill mscp earlier on regarding the power source. which we tok abt over d phone

rooks like 15amp plug.
machiam those for air con one?

maybe zheng hu scare we ish hot?

 

[Matrix23x]

Maybe if I get a WRX body, I should paint it to local TP colour then can simulate NFS:MW Singaporean edition hors?

hehe someone frm sgdrifters make before le keke see before le

 

[Matrix23x]

eh max, this is my find at redhill mscp earlier on regarding the power source. which we tok abt over d phone

wah this type ah big holes ones i tot small ones... ermmm hw ah ?

 

[blankies]

wah this type ah big holes ones i tot small ones... ermmm hw ah ?

get a adaptor la....

This is for high current flow de. Work work for us normal peeps also. so no worries.

 

[blankies]

rooks like 15amp plug.
machiam those for air con one?

maybe zheng hu scare we ish hot?

no la....all the power machine they used to wash floor needs big current drive, and also, need to provide for our wedding and funerals leh?

 

[blankies]

...... prusss 1

Dun prss 1 leh....what time you folks meeting?

 

[TheoDR]

Where chius all want to meet tomorrow?

 

[Matrix23x]

Where chius all want to meet tomorrow?

gd question n whos falling in for the 1st meet? dxgal where r u chius?

who wants to meet up or who wants to go?

 

[sexydude]

hi guys,(06/01/07) @ 3.30 pm there will be a drift meet at jalan kukoh.heres the map http://www.streetdirectory.com/asia...0&travel_site=1 we will be at blk 8A mscp second storey hope to see u guys..tracks will be provided.anyway we play every saturday cheers..

 

[OniHibiki]

ok i bac in action in new office so tomolo how? if i nv reply update mi by sms.

 

[Revolution]

butties,

ask u all...

is there something wrong with my servo? or is it due to interference?

because, when i turn on my car, steering will auto lock to right.....

then suddenly it will throttle, steering go str8 and lock again?

simi taiji?

blurs riaos.

 

[OniHibiki]

u usin 2pl? tried to tune to the correct frequency. u need proper setup on the transmitter gun. is not plug n play.

 

[Revolution]

u usin 2pl? tried to tune to the correct frequency. u need proper setup on the transmitter gun. is not plug n play.

Yup 2pl
what do you mean by tune to correct freq?

its not determined by my xtals?

setup what on the tx gun?

confused riaos....

 

[Matrix23x]

Yup 2pl
what do you mean by tune to correct freq?

its not determined by my xtals?

setup what on the tx gun?

confused riaos....

eh frequency should be ok leh, while the alignment of the servo piece u got align properly?

my one didnt tune anything... juz everything ok then run le~

ermmm did u follow the manual properly? should be ok wor..

 

[Revolution]

eh frequency should be ok leh, while the alignment of the servo piece u got align properly?

my one didnt tune anything... juz everything ok then run le~

ermmm did u follow the manual properly? should be ok wor..

it seems there are some interference in the freq.

if i were to adjust the antenna upright using my hand...(cos haven done my shell) no probs.

then if i were to just drop it to say near the ground, thats when my interference part come in.
Will have auto throttle n turn left right issue.

right now the servo issue is resolved, probably due to to the way my wires are packed.
(coiled them together initally, seems that i move abit here and there problems gone.

read from some sites that some electrical devices can cause interference....not too sure. but
will monitor.

after some 6 hours yesterday building the car and some 4 hours today, im beat.
take 5 first.....

 

[Matrix23x]

erm floor mayb ba .. whole floor tiling wor whole flat rehs talking abt few rooms link up?

my wire i coil it at the cover stands there juz coil ard there loh~ should be ok ba if not then tml we take a rooks at ur car loh, let the chief Enginner Theo take a rooks

 

[TheoDR]

it seems there are some interference in the freq.

if i were to adjust the antenna upright using my hand...(cos haven done my shell) no probs.

then if i were to just drop it to say near the ground, thats when my interference part come in.
Will have auto throttle n turn left right issue.

right now the servo issue is resolved, probably due to to the way my wires are packed.
(coiled them together initally, seems that i move abit here and there problems gone.

read from some sites that some electrical devices can cause interference....not too sure. but
will monitor.

after some 6 hours yesterday building the car and some 4 hours today, im beat.
take 5 first.....

Hmm, your transmitter's steering and throttle settings are in neutral right? If not, check again and reset. Do not bunch your receiver's signal wire (the long thin black one) and servo and ESC signal wires (the 3 core black, white and red ones) together with the thick wires that come from the battery as well as the ones connecting the ESC to the motor.

 

[Revolution]

Hmm, your transmitter's steering and throttle settings are in neutral right? If not, check again and reset. Do not bunch your receiver's signal wire (the long thin black one) and servo and ESC signal wires (the 3 core black, white and red ones) together with the thick wires that come from the battery as well as the ones connecting the ESC to the motor.

Noted.

Later will try again,

after i arrange the wires, no more servo probs, but after the adjustment my left digital trim is @ 20 after i adjust.

maybe later will set to neutral n reset again. tml chiu all praying where?

my shell not ready rehs...

 

[blankies]

play earlier leh! haha
I afternn cannot

 

[TheoDR]

Noted.

Later will try again,

after i arrange the wires, no more servo probs, but after the adjustment my left digital trim is @ 20 after i adjust.

maybe later will set to neutral n reset again. tml chiu all praying where?

my shell not ready rehs...

I went to scope out Vivo just nows, found power prugs riaos! Dunch know whether the others want to go where. Tmrw is a weekend, I think Vivo confirm crowded rikes siaos