RAM question; overclocking

elsenoire

Member
Joined
May 16, 2007
Messages
174
Reaction score
0
Hi shifus,

Sorry for the unclear title, I was not sure how to phrase my question.

I am currently running off a GA-AB-350 Gaming series motherboard.
https://www.gigabyte.com/Motherboard/GA-AB350-Gaming-rev-1x/sp#sp
For some time, I have been experiencing issues like games suddenly crashing and blue screens. I have 2 x 16 GB sticks installed and REMtest did not indicate any problems even after various runs. So I alternated running on only 1 stick each time. With only either stick, the system seemed to run well. However, after inserting the second stick this time, the crashes started returning so I am inclined to believe I have found the problematic RAM stick (notwithstanding the conflicting prior experience).

Anyway, I am considering getting new sticks. My current ones are rated 2400Mhz. On the mobo's website, it says the mobo supports up to 3200Mhz but states OC in parenthesis. What does this OC refer to? The mobo or my RAM?
If I were to buy replacement RAM of 3000Hz (which is only 10 bucks more), will it work at least as well as my current 2400Mhz ones, plug and play without further config/OC?

Thanks.
 

Koenig168

Arch-Supremacy Member
Joined
Nov 4, 2007
Messages
10,037
Reaction score
1,748
The OC refers to the RAM. The MB chipset officially supports up to 2667 MHz so anything above that is technically considered an OC.

DDR4-3000 will be a bit faster than DDR4-2400 in benchmarks but not noticeable in daily use.

Early AMD MBs tend to be fussy about RAM. It's possible that your RAM is fine. You can try DDR4-2133 with both sticks.

If you have not already done so, you may wish to update the BIOS as there have been multiple BIOS updates to deal with memory stability.
 
Important Forum Advisory Note
This forum is moderated by volunteer moderators who will react only to members' feedback on posts. Moderators are not employees or representatives of HWZ Forums. Forum members and moderators are responsible for their own posts. Please refer to our Community Guidelines and Standards and Terms and Conditions for more information.
Top