royfrosty
High Supremacy Member
- Joined
- Jul 23, 2009
- Messages
- 27,727
- Reaction score
- 1,553
Hard to find a perfect case after experiencing s22u damages.
The problem i had was, most of the cases brand do not protect the SPen corner that well. There is only one handful of brands does cover the Spen corner fully.
The problems i had last time was when i accidentally dropped my S22u on normal concrete flooring and hit on the Spen area. The Spen corner are dented. If brand manufacturers were to cover the Spen area with air gaps. It is unlikely the dent will happened and to do so, they have to increase the overall thickness to the corners. Example Ringke Fusion Bumper. Or simply some UAG Monarch level of cases.
Do be careful with Spigen Liquid Air, Hybrid, crystal and thin fit. These few does not have good air cushions. Reason being, the s23u is heavy. With that small air cushion that they fit on each corner (less Spen), the drop on s23u is usually more impactful than the air cushion can handle.
As for the camera protection. It is insane that many chose to cover all the lenses individual cut outs. But they never raised the camera area well enough. A drop on roads is a direct impact to the cameras. Get those overall raised camera cut outs. Those will definitely help (though not 100%) but better survivability.
After factoring, camera bump raised and individual camera cutout raised, a slightly thicker corner bumpers. It is damn hard to find a good case. Haiyo
The problem i had was, most of the cases brand do not protect the SPen corner that well. There is only one handful of brands does cover the Spen corner fully.
The problems i had last time was when i accidentally dropped my S22u on normal concrete flooring and hit on the Spen area. The Spen corner are dented. If brand manufacturers were to cover the Spen area with air gaps. It is unlikely the dent will happened and to do so, they have to increase the overall thickness to the corners. Example Ringke Fusion Bumper. Or simply some UAG Monarch level of cases.
Do be careful with Spigen Liquid Air, Hybrid, crystal and thin fit. These few does not have good air cushions. Reason being, the s23u is heavy. With that small air cushion that they fit on each corner (less Spen), the drop on s23u is usually more impactful than the air cushion can handle.
As for the camera protection. It is insane that many chose to cover all the lenses individual cut outs. But they never raised the camera area well enough. A drop on roads is a direct impact to the cameras. Get those overall raised camera cut outs. Those will definitely help (though not 100%) but better survivability.
After factoring, camera bump raised and individual camera cutout raised, a slightly thicker corner bumpers. It is damn hard to find a good case. Haiyo
