StarHub MaxInfinity Fiber Optic - Experience

[sfsy90]

1. set channel 1-11
2. set 20/40MHz and not 20MHz.
3. set wpa2-aes psk.

since these are not mentioned, I will have to give assumptions.

follow the above.

skip the repeater. it shouldn't even be part of your consideration.

Thanks for the help. But I have been using Channel 1 all the way and don't really find a difference in changing channels.

For the no.3 , do I set to wpa2 only?

 

[Gribber]

Thanks for the help. But I have been using Channel 1 all the way and don't really find a difference in changing channels.

For the no.3 , do I set to wpa2 only?

as mentioned.

please perform 2 and 3 as well.

provide screen capture if possible on your saved config.

 

[sfsy90]

as mentioned.

please perform 2 and 3 as well.

provide screen capture if possible on your saved config.

Did I do it correctly? Like no difference.

 

[Gribber]

Did I do it correctly? Like no difference.

your adapter still showing 72Mbps?

if so, go change your adapter settings to 40MHz as well

 

[carlogambino]

Hi guys, I'm having problems connecting my Asus RT-N66U to the ONT directly. Current config is:

Select ISP: Manual

Internet: VID 1071 PRIO 1
IPTV (LAN 4): VID 1099 PRIO 1
VoIP (LAN 3): VID 1095 PRIO 1

(apparently LAN 4 and LAN 3 doesn't matter)
Authentication: disabled

Host Name: S/N of RG. found on sticker on RG (starts with PX...)
MAC Address: MTA MAC of RG. found on sticker on RG.

Is there anything wrong with this config? I can't seem to get it to work. Currently on bridge mode. Any help will be much appreciated. Thanks!

 

[sfsy90]

your adapter still showing 72Mbps?

if so, go change your adapter settings to 40MHz as well

Yes, still 72Mbps.

Where to change the settings to 40Mhz? Can't find it.

 

[oric1]

Hi guys, I'm having problems connecting my Asus RT-N66U to the ONT directly. Current config is:

Select ISP: Manual

Internet: VID 1071 PRIO 1
IPTV (LAN 4): VID 1099 PRIO 1
VoIP (LAN 3): VID 1095 PRIO 1

(apparently LAN 4 and LAN 3 doesn't matter)
Authentication: disabled

Host Name: S/N of RG. found on sticker on RG (starts with PX...)
MAC Address: MTA MAC of RG. found on sticker on RG.

Is there anything wrong with this config? I can't seem to get it to work. Currently on bridge mode. Any help will be much appreciated. Thanks!

Try this :

LAN > Switch Control > Disable HW Accelerator = Yes

 

[Gribber]

Yes, still 72Mbps.

Where to change the settings to 40Mhz? Can't find it.

properties of your network adapter

 

[carlogambino]

Try this :

LAN > Switch Control > Disable HW Accelerator = Yes

Thanks man this solved it

 

[sfsy90]

properties of your network adapter

Ya. I went to Properties. But still can't seems to find it.

 

[Gribber]

Ya. I went to Properties. But still can't seems to find it.

screen capture please.

update your drivers as well.

btw is your D-Link DWA-160 Xtreme N DualBand USB Adapter showing >72Mbps?

 

[sfsy90]

screen capture please.

update your drivers as well.

btw is your D-Link DWA-160 Xtreme N DualBand USB Adapter showing >72Mbps?

Updated to the latest driver already.

It is DWA-525 showing 72Mbps.
On another computer which is using the DWA- 160 show max of 50+Mbps only.

Will get the screen shot when I get home tonight.

 

[Gribber]

Updated to the latest driver already.

It is DWA-525 showing 72Mbps.
On another computer which is using the DWA- 160 show max of 50+Mbps only.

Will get the screen shot when I get home tonight.

I know we are discussing about the dwa-525.

I just need to know if only dwa-525 is being capped at 20MHz or etc.

can you use the dwa-160 and plug into your computer where the dwa-525 is and screen cap?

somehow I have a feeling that your router is still throwing 20MHz to you might be due to conjested wireless. possible to set to 40MHz alone in your router?

 

[Jacknjill]

Just want to confirm that you cannot stream to watch PP, FS and listen to KW, XM on Starhub?

I installed Win8 and these apps are available but just cannot stream. Wonder if it is due to Starhub?

 

[sfsy90]

I know we are discussing about the dwa-525.

I just need to know if only dwa-525 is being capped at 20MHz or etc.

can you use the dwa-160 and plug into your computer where the dwa-525 is and screen cap?

somehow I have a feeling that your router is still throwing 20MHz to you might be due to conjested wireless. possible to set to 40MHz alone in your router?

This is what I get when I use dwa-160 and plug into the computer where the dwa-525 is on.

Not possible to set router to 40Mhz alone. I only have two options:

 

[Gribber]

Just want to confirm that you cannot stream to watch PP, FS and listen to KW, XM on Starhub?

I installed Win8 and these apps are available but just cannot stream. Wonder if it is due to Starhub?

no. is your system issue. not starhub

 

[Gribber]

This is what I get when I use dwa-160 and plug into the computer where the dwa-525 is on.

Not possible to set router to 40Mhz alone. I only have two options:

your signal doesn't seem strong.

can try 802.11n alone without the g for your router settings.

and download inssider and screencapture?

 

[sfsy90]

your signal doesn't seem strong.

can try 802.11n alone without the g for your router settings.

and download inssider and screencapture?

Tried before. That's why I think the router is lousy. Anyway, the router is in my living room and the rest of the computers are in the room.

 

[Gribber]

Tried before. That's why I think the router is lousy. Anyway, the router is in my living room and the rest of the computers are in the room.

inssider? no download? I need to see what MHz your antenna is picking up.

Anyway, i am a past user of the router, i will say the range is pretty good for your case i have no idea why.

Anyway, i have moved on to ASUS RT-56U and the range is far superior than the D-Link.

I have no complains on the D-Link except web surfing with it that causes issues during intermittent timing hence the switch

 

[Jacknjill]

no. is your system issue. not starhub

I tested using my Andriod phone. Also cannot stream PP, FX, KW, XM, etc. I am using the D-link router provided by Starhub. Could there be some settings on the block that I have to enable?