Air purifier?

Status
Not open for further replies.

WussRedXLi

Greater Supremacy Member
Joined
Jun 15, 2001
Messages
94,823
Reaction score
11,447
WRX do you know what is the filter size for sharp kc840 since you own one? Am thinking of ordering a custom one from local

370mm x 234mm. Original is 33mm depth, cavity can hold 45mm max.
 
Last edited:

ahtancw

Arch-Supremacy Member
Joined
Jul 15, 2004
Messages
13,306
Reaction score
6
370mm x 234mm. Original is 33mm depth, cavity can hold 45mm max.

Thanks ! Do you buy a generic size and then DIY? Am thinking of getting from TB since the local price is not cheap and its not H13 to begin with
 

dqwong

High Supremacy Member
Joined
Jan 21, 2002
Messages
38,116
Reaction score
11,754
Is there a term for someone who is very concern about air quality?

Airpuriphile?
 

xyz2006

Member
Joined
May 23, 2006
Messages
103
Reaction score
0
Brother WussRedXLi. Can you advise where can I get the replacement Deodorizing (FZ-A50DFE) and Humidifying (FZ-A60MFE) filter for Sharp KC-A50E AP from TB? Thanks.
 

stam

Arch-Supremacy Member
Joined
Jan 1, 2000
Messages
18,895
Reaction score
86
To expand on this, locally there is a car shop selling some sort of car HEPA filter that you can put into the filter holder of your car A/C.

Or you can customise a less restrictive F7 quality filter from TB.

It does help, I have multiple times measured the levels and sometimes the Hyndai Sonata citycab gave me a 8X drop vs external levels. ie good enough for pre-term infants for short duration travels even if external is > 300 ug/m3.

As how much an airflow drop it presents, and whether or not your A/C can take it/freeze or not, that one I leave it to the individual. Coz it really depends on the health and fan blower of the car AC.

Which shop on tb can we buy the car filter?
 

mindgamey

Senior Member
Joined
Aug 25, 2008
Messages
1,208
Reaction score
131
Brother WussRedXLi. Can you advise where can I get the replacement Deodorizing (FZ-A50DFE) and Humidifying (FZ-A60MFE) filter for Sharp KC-A50E AP from TB? Thanks.


you don't need to change deodorzing filter if you primarily use for dust cos the deodorizing filter is not very effecrive
 

Tryg2015

Senior Member
Joined
Sep 28, 2015
Messages
522
Reaction score
0
Already mentioned before, my friend. Do not use any sort of additional pre-filter. I can write a long story on the reasons and my experience and in-room measurements, but seriously......there really is no need. I always read posts about using pre-filter.

It's really just a waste of additional money, somemore filtrete. Even the Taobao filter is like 1.3 dollar a piece, and you throw it away 1 week later nowadays.

Bro wrx
I just received the cheapo commoner hepa from taobao, and they gave the spongy type of filter foc. These are no use too?

And the taobao filterate (not 3M) are what you mentioned in this post right? Waste of money?sob sob
 

WussRedXLi

Greater Supremacy Member
Joined
Jun 15, 2001
Messages
94,823
Reaction score
11,447
Nobody bai ah?

TB2Ze6.bFXXXXaZXXXXXXXXXXXX-10198919.jpg



TB2YD7abFXXXXahXXXXXXXXXXXX-10198919.jpg


TB2wFY1bFXXXXaiXpXXXXXXXXXX-10198919.jpg


TB2hp3dbFXXXXXcXXXXXXXXXXXX-10198919.jpg


TB26L3cbFXXXXXuXXXXXXXXXXXX-10198919.jpg


TB2V0f0bFXXXXa2XpXXXXXXXXXX-10198919.jpg


TB2sgscbFXXXXXqXXXXXXXXXXXX-10198919.jpg
 

WussRedXLi

Greater Supremacy Member
Joined
Jun 15, 2001
Messages
94,823
Reaction score
11,447
Tested in their China standardised 30 cu metre test chamber. Which is like our HDB BTO bedroom.

TB233JtcVXXXXXAXpXXXXXXXXXX_!!52523504.jpg

TB2kORBcVXXXXbKXXXXXXXXXXXX_!!52523504.jpg

TB2EEVtcVXXXXbfXXXXXXXXXXXX_!!52523504.jpg

TB2cexzcVXXXXcgXXXXXXXXXXXX_!!52523504.jpg
 

WussRedXLi

Greater Supremacy Member
Joined
Jun 15, 2001
Messages
94,823
Reaction score
11,447
Bro wrx
I just received the cheapo commoner hepa from taobao, and they gave the spongy type of filter foc. These are no use too?

And the taobao filterate (not 3M) are what you mentioned in this post right? Waste of money?sob sob

Those spongy filter would cut your airflow. Heck, even slicing out the AC filter of the original AX40 would boost the airflow to 350+ m3/hr.

Already have prefilter, relax. Everything is well taken care of.

Use that "PF75" electrostatic filter that you've gotten from Taobao on your fans or something. Loud though. :D

Anyway, I managed to search for the performance of that 蜗牛 electrostatic filter. I did measure once before. It's about half the performance (CADR) of the 3M. And yes, it has quite severe cut in airflow, even more than the 3M Filtrete when I measured with my anemometer.


Here :

160390452.ohKZ2tgE.1.jpg
 
Last edited:

Tryg2015

Senior Member
Joined
Sep 28, 2015
Messages
522
Reaction score
0
Those spongy filter would cut your airflow. Heck, even slicing out the AC filter of the original AX40 would boost the airflow to 350+ m3/hr.

Already have prefilter, relax. Everything is well taken care of.

Ok ok
I use for art and craft haha
 
Status
Not open for further replies.
Important Forum Advisory Note
This forum is moderated by volunteer moderators who will react only to members' feedback on posts. Moderators are not employees or representatives of HWZ Forums. Forum members and moderators are responsible for their own posts. Please refer to our Community Guidelines and Standards and Terms and Conditions for more information.
Top