Any NR200p from Coolermaster Users?

[protestmofo]

And if you use that case, how is the temps like and what kind of configuration do you go for?

I'm planning to get a NR200p with Tempered Glass as I really want to see RGB, but im worried about the temps.

 

[skrekro]

My GPU temp is great but my cpu temp sucks ass cos i'm using the stock cooler. Changing soon. Idle is 68C which is pretty damn high.
On full stress test load, CPU: 80C @ 4.6Ghz. GPU 71C @ 2020mhz
Both not throttling but the CPU is hotter than I'd like. Using the 2 included stock fans as intake only, no exhaust. Will be adding noctua fans.

 

[protestmofo]

My GPU temp is great but my cpu temp sucks ass cos i'm using the stock cooler. Changing soon.

On full stress test load, CPU: 80C @ 4.6Ghz. GPU 71C @ 2020mhz
Both not throttling but the CPU is hotter than I'd like.

That is great news. What's your fan intake configuration?

 

[skrekro]

That is great news. What's your fan intake configuration?

2 top intake only. When the fans come, I'm adding a 92mm exhaust, 2 side intake, 2 top exhaust. I'll maybe remove the TG all together and leave the side open.

 

[berber]

Recently built one, 8600k/2080ti with 240mm bottom mounted AIO, vertically mounted GPU and top exhaust case fans.

With TG panel on, the CPU was fairly cool but GPU was hot, hitting 80s degrees range during load/gaming as the card is too close to the side panel and barely any intake. However as expected with mesh panel on, the temps dropped to about 60s degrees during load/gaming.

Conclusion: TG only worth for the looks but be prepared to compromise the thermals during high workloads if you are going with AIO cooler. Might experiment with air cooler config one day.

 

[gonnie]

I using nr200p, very nice. idle 43 to 45 degrees, 5600x.

Bottom 2x intake, top 2x exhaust.

Sent from HUAWEI VOG-L29 using GAGT

 

[skrekro]

You guys temp good ah. Mine I think choking due to only intake, summore from top. Maybe I change to exhaust and see if it's better.

 

[lotr2000]

You guys temp good ah. Mine I think choking due to only intake, summore from top. Maybe I change to exhaust and see if it's better.

Exhaust would be better as you force cool air to come from the bottom/side/back directly into the components you want to cool i.e. cpu and gpu

 

[Hyperephania]

Wonder if this case can fit 2 aio, CPU and GPU

Sent from Xiaomi POCO F2 PRO using GAGT

 

[skrekro]

I think 1 240 and 1 120 should be okay but I'm thinking about the tubes... Custom wc should be a better fit

 

[gonnie]

Wonder if this case can fit 2 aio, CPU and GPU

Sent from Xiaomi POCO F2 PRO using GAGT

need use bracket ba, cannot use tg

 

[Humster]

You guys temp good ah. Mine I think choking due to only intake, summore from top. Maybe I change to exhaust and see if it's better.

Brother, hot air raises leh. You want top intake also can, but you need side exhaust. But this only works on those ATX casings like Lian Li 011D or Tecware VXR

 

[mamboberg]

I'm. Not using the tg panel. I got top 2xexhaust, side intake on 240mm rad. Cpu Idle 41 degree to 45 degree on 3% load. Gpu Idle is 32 to 35 degree on Idle.

Brother, hot air raises leh. You want top intake also can, but you need side exhaust. But this only works on those ATX casings like Lian Li 011D or Tecware VXR

 

[gonnie]

i tried the bracket set up b4, added 2x 120mm gentle typoon, improved temp by 5 - 7 degrees on cpu, but switch back to tg for eye candy

 

[nuahster]

Now experimenting with TG panel with vertical GPU & AIO, but i rotate the case on its side to use it like a tower. Case fan & AIO pump set to silent curve preference, fans under load nv go more than <1300rpm

Cpu
idle 39-45
Load 67-73
Gpu
normal desktop usage 41-47
Gaming Load 78-85

When Using Aircon, temps on avg can be about 5 degrees lower. Cpu under load doesn’t go above 67, and gpu about 75-82

 

[damnit]

Using TG with 2 bottom intakes (Corsair QL120) and 2 top exhaust fans. CPU cooler with 2 fans (Corsair QL120) running as intake from back.

Normal usage around 45 degrees and cinebench max out 70 degrees. GPU not yet tested.

 

[skrekro]

Brother, hot air raises leh. You want top intake also can, but you need side exhaust. But this only works on those ATX casings like Lian Li 011D or Tecware VXR

Yeah I know. I was thinking that the intake would have airflow good enough to push out all the hot air to whatever holes the casing has.

Wah didn't know this casing can change orientation. Incredible. Where you get the high skinny feet?

Well no difference ah. Put as exhaust also 80c. Probably need to change the cpu cooler. The Spire/stealth suck ass.

 

[Hyperephania]

I think 1 240 and 1 120 should be okay but I'm thinking about the tubes... Custom wc should be a better fit

Thinking too but no experience and got many questions haha

need use bracket ba, cannot use tg

Tbh I'm fine without tg cos it'll most likely be placed on the left side

Sent from Xiaomi POCO F2 PRO using GAGT

 

[Hyperephania]

Now experimenting with TG panel with vertical GPU & AIO, but i rotate the case on its side to use it like a tower. Case fan & AIO pump set to silent curve preference, fans under load nv go more than <1300rpm

Cpu
idle 39-45
Load 67-73
Gpu
normal desktop usage 41-47
Gaming Load 78-85

When Using Aircon, temps on avg can be about 5 degrees lower. Cpu under load doesn&#146;t go above 67, and gpu about 75-82

That's a very nice orientation!

Sent from Xiaomi POCO F2 PRO using GAGT

 

[nuahster]

Wah didn't know this casing can change orientation. Incredible. Where you get the high skinny feet?

just look for any furniture legs to your liking, i used those super strong double sided sticky tape to paste them on the bottom, no drilling/screws or physical modding.

i got the aluminum legs (8cm height) on taobao, but also came across the exact same furniture legs on lazada too. i would recommend getting on taobao as its much cheaper, just do a reverse image search to find it.