Any NR200p from Coolermaster Users?

[tkdboi]

For vertical mounting, what cpu cooler are you using?

Mine is 240mm AIO - Dreamcore Nebula 240 AIO as my set is from Dreamcore haha
lazy to self assemble nowadays

Posted from PCWX using SM-F916B

 

[tkdboi]

nice, with your gaming x trio in vertical mount, did you still manage to squeeze in 120mm fans at the top? my TUF card just barely clear the fan.

Only manage to squeeze in 1 at the top on the left.

Right side i see the power pins would make it too tight.

Posted from PCWX using SM-F916B

 

[tkdboi]

closer pic in operation

Posted from PCWX using SM-F916B

 

[skrekro]

After adding 2X 120mm noctua fans at the bottom of the case and a 92mm exhaust, cpu and gpu temp dropped summore.

Now cpu on same load 57-59 instead of 60-62 and gpu 58c instead of 65c.

Abit ugly but works well lol

Ps how the heck you guys put pictures? I see a broken image

 

[zleipnir]

This Orientation reminds me of the NZXT H1. Why dun just buy that?

Now experimenting with TG panel with vertical GPU & AIO, but i rotate the case on its side to use it like a tower. Case fan & AIO pump set to silent curve preference, fans under load nv go more than <1300rpm

Cpu
idle 39-45
Load 67-73
Gpu
normal desktop usage 41-47
Gaming Load 78-85

When Using Aircon, temps on avg can be about 5 degrees lower. Cpu under load doesn’t go above 67, and gpu about 75-82

 

[protestmofo]

Finally got my rig setup.

Specs
Mobo: B550I Aorus Elite AX
CPU: 5600x
Cooler: Hyper 212 Black + 1 more fan
GPU: 3070 Aorus Master
PSU: Cosair SF750
Case Fan: Stock intake x2 at top
Using Tempered Glass

Still in the process of maximising my system's OC + Temp, but stable on Cyberpunk 2077:
CPU 4.5Ghz @1.3v 65-68C
GPU Core+160MHz | Mem +1000Mhz @95% power 75-79C

Pretty lucky so far with GPU i think. Should be able to OC it even more

 

[nuahster]

This Orientation reminds me of the NZXT H1. Why dun just buy that?

indeed i was inspired by NZXT H1, liked the small footprint it took up on desk. hence i rotated the NR200P

NZXT H1 hardware compatibility isn't great. Planning to put RTX3000 or RX6000 GPU in the H1 is not ideal due the sandwich style layout that blocks GPU cooler flow through design. Plus the H1 is limited to GPU thickness of 2.5 slot. H1 also limited to low profile cpu coolers should the bundled 140mm AIO fail one day

Reviews about H1 thermal performance isn't fantastic either, its decent, but NR200 on the other hand has great reviews about its thermal performance.

in my use case (pun intended).
- already have a kraken X53 and tower cpu cooler on hand from my previous builds, wanted to try & reuse it.
- want a min. 750W PSU for RTX3000 or RX6000 GPUs. don't want the hassle to buy and then sell the bundled 650W PSU from H1
- need to fit 2x 2.5" SSD.
- need to fit 2.7 - 3 slot thick current gen GPUs that i was considering.

NR200P checks all the boxes for me.

 

[nuahster]

Only manage to squeeze in 1 at the top on the left.

Right side i see the power pins would make it too tight.

Posted from PCWX using SM-F916B

closer pic in operation

Posted from PCWX using SM-F916B

nice, you can try getting 180 degree Power Adapter and route your power cables behind the backplate, Thats what i used. Then you should be able to fit another 120 fan at the top to help with exhaust.

*images from google*

 

[nuahster]

After adding 2X 120mm noctua fans at the bottom of the case and a 92mm exhaust, cpu and gpu temp dropped summore.

Now cpu on same load 57-59 instead of 60-62 and gpu 58c instead of 65c.

Abit ugly but works well lol

Ps how the heck you guys put pictures? I see a broken image

help you embed pic.

 

[nuahster]

Temps while gaming:

CPU - 60-65 degrees
GPU - 60-70 degrees
Idle - both around 40 degrees

Using Scythe Mugen 5 Rev B for CPU cooler
Replaced the free fans (from case & cpu cooler) with Sirius Pure ASP120s

CPU cooler - 1 intake fan
Case - top 2 exhaust fans

Ignore the cable mess, this was taken during initial testing

help embed pic, those are some nice looking fans, you still have room below gpu for more fans

 

[Neathdrawls]

Nice to see other local NR200(P) rigs! It's such a good case.

Can't post pictures or links, unfortunately, below are the specs for my rig.

Updated Specifications
Case: NR200P Black
Processor: AMD Ryzen 7 5800X
Motherboard: MSI B550i MPG
Ram: 32 GB Corsair Vengeance 3600Mhz
PSU: Cooler Master V750 SFX Gold
GPU: MSI 3080 Gaming X Trio
Cooler: Be Quiet! Pure Loop 240mm AIO with 2 Lian Li Uni SL120 fans
Case Fan: 2x Lian Li Uni SL120 fans up top for exhaust
Storage: 1TB Patriot M.2 NVME SSD
Storage: 1TB Patriot M.2 NVME SSD
Storage: 2TB Sanddisk 2.5' SSD
Monitor: Supersolid 34" XG340R Ultimate

I got a post in the sffpc subreddit under the same user name, if anyone wants to take a look at my rig!

Cheers everyone!

 

[dorabee]

After viewing Gamer Nexus video about mounting the AIO at bottom will affect the reliability, I just wanna ask whether there is an easy way to mount it at the top even though the casing does not support?

 

[dorabee]

Saw the release of the STL files from CM. Does that allow the mounting of 240 rad at the top? or need more modding in order to fit?