Ask Yamaha / FAQ

mypillowtalks

High Supremacy Member
Joined
May 1, 2008
Messages
32,714
Reaction score
78
Hello

Do you have any Atmos AVR or processor that has preout for every channel?

Basically my speakers are all powered by their respective power amplifiers, i only need the processor function to decode and sort the signal into front, back, rear, sub, ceiling, etc...

How much does it cost roughly?

I remember i've seen yahama with that functions some years back. but it was on a 7.1
 

YamahaSG

Featured Sponsor for Home Theatre & Audiophiles
Joined
May 26, 2011
Messages
1,257
Reaction score
0
Hello

Do you have any Atmos AVR or processor that has preout for every channel?

Basically my speakers are all powered by their respective power amplifiers, i only need the processor function to decode and sort the signal into front, back, rear, sub, ceiling, etc...

How much does it cost roughly?

I remember i've seen yahama with that functions some years back. but it was on a 7.1

Hi Bro,

Please look into RX-A850,1050,2050,3050 and CX-A5100.
Above mention has pre-out jacks to your respective power amp.

Price starting from $1499.00 - $3699.00 inclusive of GST.
Kindly visit our website for more information.
http://sg.yamaha.com/en/products/audio-visual/av-receivers-amps/aventage_a50_series/?mode=series#tab=product_lineup
http://sg.yamaha.com/en/products/audio-visual/av-receivers-amps/a5000_series/?mode=series

Thank you.
 

darrylong

Junior Member
Joined
Nov 29, 2007
Messages
8
Reaction score
0
Hi yamaha,

I have this issue with the eshop where I get this enets error when I try to checkout. I've tried calling in for the past 4 days without success, sent an email enquiry in, sent a Facebook message but NO ONE replies me. I hope this is the avenue in which you can enlighten me.

Anyway, the promo ends at 13 March, and if I don't get to purchase it, well, I think you're not only just losing out a customer, but serious questioning as regards to your customer service.

Please assist!
 

YamahaSG

Featured Sponsor for Home Theatre & Audiophiles
Joined
May 26, 2011
Messages
1,257
Reaction score
0
Hi yamaha,

I have this issue with the eshop where I get this enets error when I try to checkout. I've tried calling in for the past 4 days without success, sent an email enquiry in, sent a Facebook message but NO ONE replies me. I hope this is the avenue in which you can enlighten me.

Anyway, the promo ends at 13 March, and if I don't get to purchase it, well, I think you're not only just losing out a customer, but serious questioning as regards to your customer service.

Please assist!

Hi Darry,

You have reached me well.

Please provide me your email and contacts, i will send you a pm for your contact. I can assist you to get to the eshop department directly.

Sorry for any inconvenience this has caused you.

Thanks!
 

YamahaSG

Featured Sponsor for Home Theatre & Audiophiles
Joined
May 26, 2011
Messages
1,257
Reaction score
0

kkcheng77

Senior Member
Joined
Oct 4, 2001
Messages
1,567
Reaction score
579
Thanks!

After resetting, it does wipe off all stored settings and the problem I had. Have been testing it for a few hours (Tested with FM Radio) without the seeing the issues. But unfortunately once I switch to HDMI with my WD TV Live, the problem comes back with 10 minutes. I am suspecting some HDMI signal interfacing issues.
Is there something can be done?
 

YamahaSG

Featured Sponsor for Home Theatre & Audiophiles
Joined
May 26, 2011
Messages
1,257
Reaction score
0
Thanks!

After resetting, it does wipe off all stored settings and the problem I had. Have been testing it for a few hours (Tested with FM Radio) without the seeing the issues. But unfortunately once I switch to HDMI with my WD TV Live, the problem comes back with 10 minutes. I am suspecting some HDMI signal interfacing issues.
Is there something can be done?

Hi,

Kindly bring your set to our service centre
http://sg.yamaha.com/en/support/technical_services/

Thank you.
 

alnzwah

Junior Member
Joined
Jun 6, 2010
Messages
7
Reaction score
0
need help with home audio setup with YAMAHA YHT 401

hi yamahasg,

i need help to setup/configure my home audio for tv.

current setup: i have starhub tv box, yamaha YHT401 + the woofer, LG 55" smart tv. starhub tv box is connected to the woofer via HDMI, woofer connected to tv via HDMI, woofer connect to sound bar via 6 colored wires. nothing from soundbar to tv.

problem: everytime i want to watch tv, i have to turn on everything including woofer, tv, starhub tv box. sound from the starhub tv channels are coming out from the woofer and soundbar - perfect. however, if i turn off the tv, i can still hear sound from the woofer and soundbar! and if i stream youtube via LG smart tv, i can't get any sound to come out from the woofer and soundbar at all.

ideal setup: i hope to achieve the setup where i am able to hear sound from the soundbar when im watching tv or streaming youtube via LG smart tv, but only when i have the 'feel' then i turn on the woofer to get the booming effect. in short, i can save power but keeping the woofer off most of the time. is this possible?

unfortunately, i am not an audio expert. all i remember is that the LG tv has 3 color holes at the back, a few HDMI ports with 1 marked with 'ARC'.

please advise.

Thanks!
 

YamahaSG

Featured Sponsor for Home Theatre & Audiophiles
Joined
May 26, 2011
Messages
1,257
Reaction score
0
hi yamahasg,

i need help to setup/configure my home audio for tv.

current setup: i have starhub tv box, yamaha YHT401 + the woofer, LG 55" smart tv. starhub tv box is connected to the woofer via HDMI, woofer connected to tv via HDMI, woofer connect to sound bar via 6 colored wires. nothing from soundbar to tv.

problem: everytime i want to watch tv, i have to turn on everything including woofer, tv, starhub tv box. sound from the starhub tv channels are coming out from the woofer and soundbar - perfect. however, if i turn off the tv, i can still hear sound from the woofer and soundbar! and if i stream youtube via LG smart tv, i can't get any sound to come out from the woofer and soundbar at all.

ideal setup: i hope to achieve the setup where i am able to hear sound from the soundbar when im watching tv or streaming youtube via LG smart tv, but only when i have the 'feel' then i turn on the woofer to get the booming effect. in short, i can save power but keeping the woofer off most of the time. is this possible?

unfortunately, i am not an audio expert. all i remember is that the LG tv has 3 color holes at the back, a few HDMI ports with 1 marked with 'ARC'.

please advise.

Thanks!

Hi,

problem: everytime i want to watch tv, i have to turn on everything including woofer, tv, starhub tv box. sound from the starhub tv channels are coming out from the woofer and soundbar - perfect. however, if i turn off the tv, i can still hear sound from the woofer and soundbar! and if i stream youtube via LG smart tv, i can't get any sound to come out from the woofer and soundbar at all.

Turn on the "ARC" on the YHT-S401 setting, make sure the Hdmi output from S401 is connect to ya LG "ARC". And also please check your LG setting is turn on also.

ideal setup: i hope to achieve the setup where i am able to hear sound from the soundbar when im watching tv or streaming youtube via LG smart tv, but only when i have the 'feel' then i turn on the woofer to get the booming effect. in short, i can save power but keeping the woofer off most of the time. is this possible?

Turn on the HDMI control in YHT-S401 setting. Whenever the unit is Off, is still able to pass-through the signal back to your tv.


Hope the manual will help you on the configuration. Please check on the link being provide.
http://download.yamaha.com/api/asset/file/?language=en&site=uk.yamaha.com&asset_id=57748

Thank you.
 

yukita

Supremacy Member
Joined
Jan 1, 2000
Messages
8,518
Reaction score
226
Hi Yamahasg,

for Yamaha YSP 2500 is the subwoofer position must be on side?

what if put it at corner behind?

is it ok to put the subwoofer behind for general brand of sound bar?

thanks.

Edit: for example in position "A" below

2016-04-20_12-14-17_zpsakgvame6.jpg
 

dwenz76

Junior Member
Joined
Jul 16, 2010
Messages
91
Reaction score
0
Hi! Yamahasg, I'm looking for good sound bar and I'm interested in buying the YSP1600 which is currently on sale by yamaha sg. Before I buy this sound bar, I would like to know why is it the Univolume feature omitted from this model? I will use this sound bar mainly for TV and this Univolume feature is very important to me. Do you think this YSP1600 has similar features as Univolume which is not listed in the manual?
 

YamahaSG

Featured Sponsor for Home Theatre & Audiophiles
Joined
May 26, 2011
Messages
1,257
Reaction score
0
Hi Yamahasg,

for Yamaha YSP 2500 is the subwoofer position must be on side?

what if put it at corner behind?

is it ok to put the subwoofer behind for general brand of sound bar?

thanks.

Edit: for example in position "A" below

2016-04-20_12-14-17_zpsakgvame6.jpg

Hi Bro,

To prevent sound reflecting off of walls, angel the subwoofer slightly toward the center of the room.

Thank you.
 

YamahaSG

Featured Sponsor for Home Theatre & Audiophiles
Joined
May 26, 2011
Messages
1,257
Reaction score
0
Hi! Yamahasg, I'm looking for good sound bar and I'm interested in buying the YSP1600 which is currently on sale by yamaha sg. Before I buy this sound bar, I would like to know why is it the Univolume feature omitted from this model? I will use this sound bar mainly for TV and this Univolume feature is very important to me. Do you think this YSP1600 has similar features as Univolume which is not listed in the manual?

Hi Bro,

Yes, totally remove the univolume. You can audition the YSP-1600 if it's still good enough for you.

Thank you.
 
Important Forum Advisory Note
This forum is moderated by volunteer moderators who will react only to members' feedback on posts. Moderators are not employees or representatives of HWZ Forums. Forum members and moderators are responsible for their own posts. Please refer to our Community Guidelines and Standards and Terms and Conditions for more information.
Top