Hi,
May I know the shops selling Yamaha MCR 840?
What are compatible audio cables to replace the default ones?
With Regards,
Lang
Hi I brought a yamaha 401 today. However I faced some problems. I connect my wd tv live to yamaha hdmi input 1 and the output to my 5 year old plasma LCD with arc. However there is no image come out. What could be the problem? I used other method like connect wd tv to the tv and the analog sound to yamaha, it work. Can assist to my problems? Is my tv too old or the hdmi cable?
Hi Yamaha,
I am thinking of upgrading my old amplifier.
May i know in terms of sound and music quality, is there a big difference between these two model?
Regards
James Ho
Hi YamahaSG,
Can you recommend me a 2.1 system with <1k budget. Where I can get audition?
Thanks
thanks you for your reply.
This is new HT setup for living room. Have seek for something better that sound bar but less bulky, yet to within my budget. Now considering these setup
1. MCR-840 + subwoofer
2. AVR + bookshelf speaker + subwoofer
Please advise
Hi eaton1977,
First of all, thank you for your purchase of YHT-S401.
From the way you mentioned your connections should be correct.
But, "my 5 year old plasma LCD with arc" this is impossible. ARC [Audio Return Channel] over HDMI Interface only released last estimated 2 years ago in technology. And if you mentioned that you had "my 5 year old plasma LCD", was it a Plasma or LCD? There isn't any "Plasma LCD".
From this way, i really could not assist in any ways. But i trust 5 years ago TV [be it LCD / Plasma], some are not in Full HD 1080P. Hence i trust your problem should be this, because your resolutions does not supports to Full HD 1080p. Again, this is what i can assume over just what you mentioned in your problem that you have faced.
If you could, please PM me your TV Model and let me know what is your source video signal output resolution. Probably i could understand better from that.
So please PM me so i could try best to assist you.
And also, very sorry for the late reply.
Happy new year my friend.
Cheers!
![]()
Check the soundbar thread... supposedly able to get very good price in KL at a particular Harvey Norman branch. Otherwise, you can try calling Parisilk at Transit Road.
Edit: btw, cheap is a relative term... but u can definitely get it "cheaper" than recommended retail price.
kun1he2, how do u find the YAS 101 sound quality so far? i just recently bought mine at Expo for $419. waiting for my house to be ready then will install. how big is ur TV? how much u paid for the bar?
regards Drak.
Hi,
I am looking for something along this line:
4 x HDMI input
1 x HDMI output
Able to decode DTS HD /Master etc
5.1 speakers
Radio Receiver
Dimensions (height around 15cm)
Sub $500 if possible.
I am going to hook my MIOTV, Starhub and ACRyan to the amp and the amp to the tv.
So if the amp is on standby mode, it should be able to bypass it to the tv directly.
Yamaha A/V Receiver RX-V371 somehow fits it, but any other recommendation?
Hi,
Thanks for the reply. I have my own sub and speakers, so my budget is purely for the amp receiver, thanks. I go online the free delivery is around 570, so was hunting around for a cheaper one and also, like I mentioned, the standby passthrough is it compatible with the MIO and Starhub boxes? Thanks.