DNS-323 Network Storage

[vannister]

thanks.just pm me.

 

[DaYellowDuckie]

guys, can the DNS323 works in LAN ?


DNS323 > RJ45 > Laptop LAN port.

 

[jittery]

guys, can the DNS323 works in LAN ?


DNS323 > RJ45 > Laptop LAN port.

erm, as long as u assign a static ip address to the DNS 323, and set the network mask correctly, shld be able to work.

 

[DaYellowDuckie]

i set my

NAS323 to 192.168.2.2, mask 255.255.255.0 and gateway 192.168.2.1
Computer LAN same as above,

is it correct ?

 

[cy]

i set my

NAS323 to 192.168.2.2, mask 255.255.255.0 and gateway 192.168.2.1
Computer LAN same as above,

is it correct ?

If you set the NAS323 IP address to 192.168.2.2 , the PC IP cannot set to 192.168.2.2

Example set PC IP:192.168.2.3

 

[GamerZ]

crap after 1 year and 2 months of oninbg 24/7, my 323 shutdown by itself. When I on it, it works for the first time and after a while, it disconnect itself from the network. I have to plug out the power cable to off it as the power button will not respond at all.

Now it keep giving me the blue blinking power of death!

 

[GamerZ]

damn i can't even hard reset it

 

[ctchng]

after operating my NAS 24/7 for about a month plus, i decided to relocate from living room to my study room. I switched it off last night and now when i relocate it to my study room, it refuses to start up...

I'd unplug the power cable, took out both hdds and reinsert it back, put back to my living room, still it won't boot up...any advise?

Kind of getting impatient to my NAS. Feel like jumping ship to other NAS...

 

[halocast]

i think dlink 323 tend to get abit warm... especially with two hdd..

 

[halocast]

after operating my NAS 24/7 for about a month plus, i decided to relocate from living room to my study room. I switched it off last night and now when i relocate it to my study room, it refuses to start up...

I'd unplug the power cable, took out both hdds and reinsert it back, put back to my living room, still it won't boot up...any advise?

Kind of getting impatient to my NAS. Feel like jumping ship to other NAS...

i believe the board inside could be dead? go rma bah

 

[halocast]

damn i can't even hard reset it

time to rma?

 

[ctchng]

i believe the board inside could be dead? go rma bah

can just plug in the same two hdds after rma and works as per normal? or it will reformat the hdds?

 

[GamerZ]

time to rma?

more than 1 year liao still can RMA?

 

[ah_fu]

anyone tried this before..

i have a 500g hdd with data in the NAS... if i add in another 500g and do a raid system, will the NAS format the first 500g hdd with data?

 

[cy]

anyone tried this before..

i have a 500g hdd with data in the NAS... if i add in another 500g and do a raid system, will the NAS format the first 500g hdd with data?

When you insert the new 500GB HDD, the DNS323 will format it. If the previous 500GB HDD is inside the DNS323 when you inserted the new HDD, there's a chance that the original HDD with data "may" be formated as well. It's widely reported and it's a firmware issue.

Instead of taking a chance, backup the infor to somewhere first. Verify the backup is ok. Then insert the new hdd and format and re-configure both hdd to your liking eg Raid1 etc.

 

[vannister]

guys are you able to get the email alerts with Starhub maxonline?Do i have to have iMail subscription to get the alerts working?Kindly share your settings.

 

[vannister]

guys are you able to get the email alerts with Starhub maxonline?Do i have to have iMail subscription to get the alerts working?Kindly share your settings.

 

[cochran]

Hi

Anything i can do to make the NAS auto restart again when there is a powercut and power is back?

 

[ah_fu]

When you insert the new 500GB HDD, the DNS323 will format it. If the previous 500GB HDD is inside the DNS323 when you inserted the new HDD, there's a chance that the original HDD with data "may" be formated as well. It's widely reported and it's a firmware issue.

Instead of taking a chance, backup the infor to somewhere first. Verify the backup is ok. Then insert the new hdd and format and re-configure both hdd to your liking eg Raid1 etc.

thanks for the advice.....

 

[cy]

thanks for the advice.....

No problem. If need other help just PM me