e-Remote Broadlink RM-Pro

[DinoSnowWolf]

Hi Xenocide, thank you for your reply.
This is really helpful.
My case is toggle on Wall is fine.
I need the remote to be able to send discrete on or off command. Since it can be program separately into RF remote, then should be no issue for me to learn from RM Pro.
May I check further does it easy to learn the function on YooGee remote?
Is there guide included on learning the remote?
Which type of Yoogee remote you will recommend for 2x 3switch and 2x single switch? 8 groups of On and Off. 16buttons or more in a single Yoogee RF remote.

not sure if i understand you correctly.
When u buy the wall switches, the remote is separate purchase.
There are 3 types of remotes. 1 Yoogee wall switch like, 1 normal "TV" RC like and 1 car key fob like.

You can learn 1 button as ON and 1 button as OFF on the remote.
By default, a learned button on remote is press once ON press once OFF.

The scenario you mention may not be a concern. The remote on the RM Pro app has ON and OFF toggles. So on your phone, when you press OFF is OFF (it doesn't care if the light is ON or OFF. If will just send OFF command. So if the lights is ON, it will OFF and if its already OFF, nothing will happen. Vice versa)

Discrete ON and OFF? The wall switch will not have cos its not build for this scenario. If you really wan a panel with 1 button for ON and 1 button for OFF, you are better off with a remote.

 

[lovehina83]

Oh.. damn.. I thought it was the other way round.
So there goes the idea of using yoogee 4gang.
Do you know if it's possible to convert my current 4gang to a 3gang? Of cos will get an electrician...

Correct me if i'm wrong.
单火 - Live wire
零线 - Neutral wire

Hdb default only has live wire unless u previously run an additional neutral wire to the wall switch.

As for the 4gang switch i cant find one without using neutral wire. So the most is only 3 gang for 单火.
For the slave switch no need wiring, just need battery

 

[hAiZzZ86]

Oh.. damn.. I thought it was the other way round.
So there goes the idea of using yoogee 4gang.
Do you know if it's possible to convert my current 4gang to a 3gang? Of cos will get an electrician...

some suggestions
- split into 2 x 2 gang
- combine another lighting point together (means on 1 equals on both)
- conceal the 2 x 2 gang somewhere then use the 4 gang slave switch
- try other brands
- run a neutral wire

I'm also interested in getting the 4 gang switch. If someone with experience with yoogee 4 gang can comment, it would be better.

 

[DinoSnowWolf]

Hi, I have 1 concern.
RF will it easy to interfere or cross control to neighbor unit if using the same brand?
Just worry my light suddenly goes on or off by itself because or neighbors using the same type.
Is there there a limit how many RF buttons control on RM Pro?
Thinking of adding blinds and AC outlet control from RM Pro too.

 

[newlife80]

Bought 2 pcs of TC2 2 gang switch.
Might need to buy more. Haha. Kanna poison Liao.

Which on u bought ?

 

[MaoZeDuo]

Once u start... hard to stopn

Bought 2 pcs of TC2 2 gang switch.
Might need to buy more. Haha. Kanna poison Liao.

 

[xenocide]

Hi Xenocide, thank you for your reply.
This is really helpful.
My case is toggle on Wall is fine.
I need the remote to be able to send discrete on or off command. Since it can be program separately into RF remote, then should be no issue for me to learn from RM Pro.
May I check further does it easy to learn the function on YooGee remote?
Is there guide included on learning the remote?
Which type of Yoogee remote you will recommend for 2x 3switch and 2x single switch? 8 groups of On and Off. 16buttons or more in a single Yoogee RF remote.

if u go taobao the yoogee flagship store, the links for switches will have a video tutorial on how to do it.

yes its easy. press and hold on the switch till you hear beep, then press the button on remote u wan to assign to that switch and repeat.

i have a 4 gang remote that controls living room and 3 bed rooms.
i have another remote which duplicates the same but with addition kitchen and toilet lights.

https://item.taobao.com/item.htm?spm=a1z10.5-c-s.w4002-14491024352.13.47b9d051X0LeVg&id=547734756758

i bought the 15buttons remote and the 4gang 随意贴

 

[xenocide]

Hi, I have 1 concern.
RF will it easy to interfere or cross control to neighbor unit if using the same brand?
Just worry my light suddenly goes on or off by itself because or neighbors using the same type.
Is there there a limit how many RF buttons control on RM Pro?
Thinking of adding blinds and AC outlet control from RM Pro too.

not sure if interference will happen as my neighbours are not doing this (yet).

 

[newlife80]

Hi Guys, I have a qns. All my bedrooms lights are using my ceiling fan light. Can I use TC2 Switch to control both the ceiling fan on/off of lights as well as to on/off the fan?

 

[newlife80]

You bet. Hahaha

Once u start... hard to stopn

 

[S750WP]

Whats a slave switch for?

The Slave switch is use as my 2 way switch located beside my main door so I can on my switch manually when I come home at night. Actually we don't need this switch since I can use my mobile phone to on the switch but for a esthetic purpose I changed all.

 

[S750WP]

For the Yoogee switch I have not receive it can I pair it with my RM pro by long pressing my light switch button. As I did not buy the remote.

 

[S750WP]

【yoogee优阁智能开关无线触摸遥控面板86型单接收二开兼容博联】http://m.tb.cn/h.ZalC2fi 点击链接，再选择浏览器打开；或复制这条信息￥KUFz0kthW6W￥后打开手淘

I watch the video think can just pair with rm pro with long press the button no need to buy a remote

 

[xenocide]

the video you seeing is not pairing with RM Pro. Its just setting up the switch or pairing with another slave switch like u mention.

Correct me if i'm wrong, once you connect the wires, the switch will work as itself a light switch. no need long press or anything. at this point it operates like a normal light switch.

To link to RM Pro, you need to add this switch device to the e-Control app on your phone. once you added the panel, you long press the switch on the panel until u hear a beep. then press the button u wan to configure on the app to link them together to communicate via RM Pro.

the remote is just an add on. its not compulsory

 

[Aditshar]

Haha. Its very normal. But do take note on your LED watts if you are using LED lightings. I start out doing my master bedroom only then now whole hse converted to smart swtich. Then add smart powerpoints lol. Next project will be my roller blinds

Bought 2 pcs of TC2 2 gang switch.
Might need to buy more. Haha. Kanna poison Liao.

 

[MaoZeDuo]

The powerpoint itself is smart or do u mean the smart plugs? Are they all able to monitor electricity consumption and feedback status?

Haha. Its very normal. But do take note on your LED watts if you are using LED lightings. I start out doing my master bedroom only then now whole hse converted to smart swtich. Then add smart powerpoints lol. Next project will be my roller blinds

 

[newlife80]

Need capacitor to connect right if less than certain wattage.

Haha. Its very normal. But do take note on your LED watts if you are using LED lightings. I start out doing my master bedroom only then now whole hse converted to smart swtich. Then add smart powerpoints lol. Next project will be my roller blinds

 

[newlife80]

Anyone can help?

Hi Guys, I have a qns. All my bedrooms lights are using my ceiling fan light. Can I use TC2 Switch to control both the ceiling fan on/off of lights as well as to on/off the fan?

 

[Aditshar]

Yes. Just put the capacitor between the live and neutral wire on the lamp itself

Need capacitor to connect right if less than certain wattage.

 

[Aditshar]

Need to see how ur fan operate. If your fan and light uses 1 gang/2 gang switch with remote, just swap it to the TC2 switch and let the RM PRO or RM mini learn the IR code. If you are are using dial switch(off,1,2,3), then you are out of luck unless you know how to do the conversion.

Hi Guys, I have a qns. All my bedrooms lights are using my ceiling fan light. Can I use TC2 Switch to control both the ceiling fan on/off of lights as well as to on/off the fan?