iRobot Scooba experience

[Jubooo]

Anybody can provide me with the instructions on how to mod my scooba 330 power supply for 240v? Model of th PS is L13143.. Thanks in adv...

The L13143 is slightly more complicated than the 13143 or roomba 17062 PSU.

 

[android]

The L13143 is slightly more complicated than the 13143 or roomba 17062 PSU.

Any advice will be greatly appreciated....

 

[mkaung2000]

Any advice will be greatly appreciated....

This is what I did and my Scooba is working.
1. Changed C1 to 100uF 400V -> Remove C1,C2 and used only one.
2. Changed RV1 to 380V Varistor
3. Changed D11 to 1N400* -> you can use 1N4001-1N4007.
You can buy all these for around $5 at Sim Lim Tower.

 

[Jubooo]

Any advice will be greatly appreciated....

You can refer to mkaung post below. It is what you need but the D11 is a little tricky due to the tight space around it.

 

[Kain999]

I only have a roomba.
But am so keen in getting a scooba but like so ex.....

Why price no drop 1........

 

[mkaung2000]

You can refer to mkaung post below. It is what you need but the D11 is a little tricky due to the tight space around it.

Remove D11 n solder on the back.

 

[mkaung2000]

I only have a roomba.
But am so keen in getting a scooba but like so ex.....

Why price no drop 1........

Check out at ebay.

 

[ashley21]

Check out at ebay.

Check with UNO-bliss or jubooo

-----
This message is sent from HWZ forums iPhone app

 

[mosmos]

I only have a roomba.
But am so keen in getting a scooba but like so ex.....

Why price no drop 1........

woot.com sgd179.99 you no buy~?

 

[Jubooo]

Remove D11 n solder on the back.

Yup, that's the only solution unless you wanna drill the hole? Still the space is still pretty tight. I've done close to 50 already bro

 

[android]

This is what I did and my Scooba is working.
1. Changed C1 to 100uF 400V -> Remove C1,C2 and used only one.
2. Changed RV1 to 380V Varistor
3. Changed D11 to 1N400* -> you can use 1N4001-1N4007.
You can buy all these for around $5 at Sim Lim Tower.

Thanks mkaung... For RV1, I have read that we can omit it? if not, can I used (14D381?) for the varistor?

 

[Jubooo]

Thanks mkaung... For RV1, I have read that we can omit it? if not, can I used (14D381?) for the varistor?

361 or 391 is fine

 

[android]

361 or 391 is fine

Thanks for the advice.....

 

[Kain999]

woot.com sgd179.99 you no buy~?

That day i didn't log in to check woot.


1 question. Even if get the high end scooba 380 it cannot clean 850 sgft without changing tank too rite?

 

[ashley21]

1 question. Even if get the high end scooba 380 it cannot clean 850 sgft without changing tank too rite?[/QUOTE]


oooh I m curious abt this too!

 

[ashley21]

Video on the aerovac bin!
http://www.youtube.com/watch?v=Iq4xTI6HFX4

 

[Jubooo]

That day i didn't log in to check woot.


1 question. Even if get the high end scooba 380 it cannot clean 850 sgft without changing tank too rite?

You are right, it's the battery capacity & the faster speed of 380 that makes it possible to clean 850 sqft. The tank is basically the same and you will need to refill or empty it.

 

[ashley21]

You are right, it's the battery capacity & the faster speed of 380 that makes it possible to clean 850 sqft. The tank is basically the same and you will need to refill or empty it.

which means halfway thru the cleaning I will neeed to refill or empty the tank?

 

[android]

What about the 330 with tge new 4100mah battery? Can it do two wash cycle?

 

[tekster]

What about the 330 with tge new 4100mah battery? Can it do two wash cycle?

i've managed 2 washes with my 330.

filled up the tank twice and ran it twice.