MyRepublic fibre - Part 4

Status
Not open for further replies.

ntec66

Senior Member
Joined
Jan 27, 2010
Messages
1,052
Reaction score
0
Posting my issues again for awareness.
If other users got similar issues, please like/quote/etc so we can know how prevalent it is

"408 Request Time-out Your browser didn't send a complete request in time." - especially for NeoGAF.com

*all these WiFi issues did not occur during PURE + RT-N66U setup

If your old router are still around, just swap them back and test. If old router works then it is not new router fault. AC68U can't be this unstable, when it is already 6 months on the market.

Also are you on static public IP?
 

imacbie

Supremacy Member
Joined
Jul 3, 2004
Messages
6,405
Reaction score
2
I did not do anything.:) think MR backend had some improvement made. Prove that MR is working ..;-)
pffft your backend and my backend different meh ... how come urs solved mine not solved lol.

oh boy, switching out the router is quite a hassle .. :s22:
i'll wait a bit more and see.

oh yah, am on static, but i think currently only bah, we do not have the luxury to switch to dynamic ips to try
 

WindJammer

Member
Joined
Jul 7, 2006
Messages
481
Reaction score
2
pffft your backend and my backend different meh ... how come urs solved mine not solved lol.

oh boy, switching out the router is quite a hassle .. :s22:
i'll wait a bit more and see.

oh yah, am on static, but i think currently only bah, we do not have the luxury to switch to dynamic ips to try


LOL ""your backend and my backend different meh ""


Well it just happened.
Just yesterday night, I tried Niv recommend firmware which is on page 282., Factory reset, tested on ONT, Wifi 2.4Hz, 5GHz, same old crappy issue, note3 speed test upload not working, tower of savior not connected, taobao, Q0010 lag etc... however, when I came back after work just now, everthing seems to be ok for now.


HOWEVER, I still had issue on my router speed.
 

ntec66

Senior Member
Joined
Jan 27, 2010
Messages
1,052
Reaction score
0
oh yah, am on static, but i think currently only bah, we do not have the luxury to switch to dynamic ips to try

Double check your router status homepage, see whats the WAN IP address, if 10.x.x.x, 169.254.x.x, 172.26.x.x or 192.168.x.x then confirm it is dynamic private address.
 

wilflare

Supremacy Member
Joined
Jun 1, 2002
Messages
9,903
Reaction score
25
If your old router are still around, just swap them back and test. If old router works then it is not new router fault. AC68U can't be this unstable, when it is already 6 months on the market.

Also are you on static public IP?

Yes I'm on Static. the thing is two factors changed.
PURE to 1Gbps
EnGenius to AC68U
 

WindJammer

Member
Joined
Jul 7, 2006
Messages
481
Reaction score
2
Hi,


If you look at below pic, The speed is somehow in line with my Ethernet speed of 1Gbps (730Mbps vs 1Gbps). Yes it is a big improvement since last complain. Is it acceptable??



If you look at below second pic, The speed comparing Wifi internet connection is horrible (82Mbps vs 150Mbps).
But wait!! How can I be getting 150Mbps on my Wifi internet connection property where it should be 1Gbps?? I am sure Lenovo Yoga 13 is capable of more than 150Mbp limit. Have I miss out anything on the AC68 router ??? What is it??? How to know if Lenovo Yoga 13 can reach more than that?? My network adapter is Realtek RTL8723AU Wireless LAN 802.11n USB 2.0


If you look at the 3rd pic, The speed comparing Wifi internet coonection is also horrible. (120Mbps vs 300Mbps). I can answer why its limit is 300Mbps because I am using Asus USB N53 Wifi adapter which the limit has capped at 300Mbps, but I am getting not even half of that on this 1Gbps plan. Again I am suspecting Router is the issue here. What did I miss out? Has anything been blocked??? Can the expert here advise??
 

tmour

Junior Member
Joined
Aug 17, 2001
Messages
25
Reaction score
1
2nd day come back from work, 1st thing test the MR connection... guess nothing is change, there goes the 1Gbps connection. It really make you happy for just for 1 week and now the bandwidth is been control now.

1st week:
26_03_2014_2_zps162eadd2.jpg


today:
4_4_2014_zps714d3cde.jpg
 
Last edited:

Johnnny

Member
Joined
Apr 22, 2013
Messages
246
Reaction score
0
2nd day come back from work, 1st thing test the MR connection... guess nothing is change, there goes the 1Gbps connection. It really make you happy for just for 1 week and now the bandwidth is been control now.

1st week:
26_03_2014_2_zps162eadd2.jpg


today:
4_4_2014_zps714d3cde.jpg

To clarify, we don't control bandwidth, pretty much because we have absolutely no reason to.

There are a lot of things that can affect your speedtest results, though we are also looking at the backend to make sure things are okay. Will update if we find anything.
 

ntec66

Senior Member
Joined
Jan 27, 2010
Messages
1,052
Reaction score
0
2nd day come back from work, 1st thing test the MR connection... guess nothing is change, there goes the 1Gbps connection. It really make you happy for just for 1 week and now the bandwidth is been control now.

1st week:
26_03_2014_2_zps162eadd2.jpg


today:
4_4_2014_zps714d3cde.jpg

That's why it is important to test our speed regularly; most folks just test in the beginning and assume it will maintain, a behavior that unfortunately 'smarter' ISPs will take advantage of.
 

Johnnny

Member
Joined
Apr 22, 2013
Messages
246
Reaction score
0
MyRepublic 1Gbps Rollout Big Update

Okay, over the past two days we've been having a number of meetings to review our current status of installations, teething issues and so on. Some figures to share:

Number of successful installations so far: 1000
Current average number of installations per day: 200


Yes, I'm serious. We'll have a another meeting on Monday where I can get a screenshot to show proof of this, but there you go.

Some of you may ask, "Then what about delays?" Delays are complicated to give a figure for, because they can vary from case to case. But here's what we've done to deal with it.

Customer support personnel increase (core team tripling in size)
Social media team personnel increase (core team doubling in size)
2 new lines for specific issues (numbers to announce soon)


We've basically thrown manpower and resources at the company in order to mitigate the issues OpenNet delays have caused our customers and us.

Why didn't we do this sooner? It's actually only been 2+ weeks since our 1Gbps has started rolling out, and frankly we didn't foresee that OpenNet delays would take such a toll on the company's customer service resources (a handful of cases per day is all you need for backlog to accumulate on our CS side).

This growth was done incrementally after the first week we rolled out, and currently our stats are as above.

On the performance side of our network:

China connection and gaming connection improvements
Kindle optimisation
Netflix optimisation


Just a couple of things we threw into the network backend to mitigate some issues people mentioned. Eh, we say first ah - China network infrastructure is still a mess in their country, so we can't promise how long our current optimisation will last, but we'll continue to monitor.

ASUS router firmware issues

We've spoken to ASUS already, who acknowledged the problem and will be updating their firmware soon. They couldn't give us a date yet, but we're keeping an eye on this.

Occasional inconsistent speeds on 1Gbps

We need to troubleshoot this on a case-by-case basis because so far, we found the following causes of such issues:

- old router
- old laptop
- wrong wires
- ASUS router firmware issues
- service DDoS in Europe (this affected Blizzard games)

We're more likely going to put an FAQ together (maybe infographic?) to help people self-troubleshoot first before escalating it.

Okay, and finally, other known issues we're tracking:

- Android connectivity issues (engineers looking into this)
- Some Static IP-related issues (engineers and IT team working on this now, believe they have found the issue)
- MyRepublic Engineers and IT personnel not getting enough sleep (hah).

We'll also be introducing a new member to the MyRepublic HWZ team soon. He's our new communications guy, once his account is up and running we'll introduce him properly.

Hope this gives some transparency and background into what's happening guys.
 
Last edited:

Lehnsherr

Supremacy Member
Joined
Feb 19, 2001
Messages
5,312
Reaction score
49
Confirm china optimization is done and is working at the moment.

because youku works right now without buffering. LOL.

But AFAIK MR has done it before and it's downhill again after a few months. So yes its true that there is a chance that the problem will be back again.
 

jastan

Master Member
Joined
Jan 1, 2000
Messages
4,459
Reaction score
0
Okay, over the past two days we've been having a number of meetings to review our current status of installations, teething issues and so on. Some figures to share:

Number of successful installations so far: 1000
Current average number of installations per day: 200

Yes, I'm serious. We'll have a another meeting on Monday where I can get a screenshot to show proof of this, but there you go.

Some of you may ask, "Then what about delays?" Delays are complicated to give a figure for, because they can vary from case to case. But here's what we've done to deal with it.

Customer support personnel increase (core team tripling in size)
Social media team personnel increase (core team doubling in size)
2 new lines for specific issues (numbers to announce soon)

We've basically thrown manpower and resources at the company in order to mitigate the issues OpenNet delays have caused our customers and us.

Why didn't we do this sooner? It's actually only been 2+ weeks since our 1Gbps has started rolling out, and frankly we didn't foresee that OpenNet delays would take such a toll on the company's customer service resources (a handful of cases per day is all you need for backlog to accumulate on our CS side).

This growth was done incrementally after the first week we rolled out, and currently our stats are as above.

On the performance side of our network:

China connection and gaming connection improvements
Kindle optimisation
Netflix optimisation

Just a couple of things we threw into the network backend to mitigate some issues people mentioned. Eh, we say first ah - China network infrastructure is still a mess in their country, so we can't promise how long our current optimisation will last, but we'll continue to monitor.

ASUS router firmware issues

We've spoken to ASUS already, who acknowledged the problem and will be updating their firmware soon. They couldn't give us a date yet, but we're keeping an eye on this.

Occasional inconsistent speeds on 1Gbps

We need to troubleshoot this on a case-by-case basis because so far, we found the following causes of such issues:

- old router
- old laptop
- wrong wires
- ASUS router firmware issues
- service DDoS in Europe (this affected Blizzard games)

We're more likely going to put an FAQ together (maybe infographic?) to help people self-troubleshoot first before escalating it.

Okay, and finally, other known issues we're tracking:

- Android connectivity issues (engineers looking into this)
- Some Static IP-related issues (engineers and IT team working on this now, believe they have found the issue)
- MyRepublic Engineers and IT personnel not getting enough sleep (hah).

We'll also be introducing a new member to the MyRepublic HWZ team soon. He's our new communications guy, once his account is up and running we'll introduce him properly.

Hope this gives some transparency and background into what's happening guys.


Does that mean that when I call in, your line won't disconnect me after x minutes on hold? Does that mean when your CS staff say give me a call back, you will call me back automatically?
 

imacbie

Supremacy Member
Joined
Jul 3, 2004
Messages
6,405
Reaction score
2
Confirm china optimization is done and is working at the moment.

because youku works right now without buffering. LOL.

But AFAIK MR has done it before and it's downhill again after a few months. So yes its true that there is a chance that the problem will be back again.
Youku not working on ipad tho,
Geoloc deny..
 

nivleK1985

Senior Member
Joined
Feb 20, 2005
Messages
1,710
Reaction score
0
Confirm china optimization is done and is working at the moment.

because youku works right now without buffering. LOL.

But AFAIK MR has done it before and it's downhill again after a few months. So yes its true that there is a chance that the problem will be back again.

If china somehow screw us again, we will optimize it again...=).
 

jastan

Master Member
Joined
Jan 1, 2000
Messages
4,459
Reaction score
0
Confirm china optimization is done and is working at the moment.

because youku works right now without buffering. LOL.

But AFAIK MR has done it before and it's downhill again after a few months. So yes its true that there is a chance that the problem will be back again.

this is just a interim solution. soon, the slowness would come back again. they need to peer with reliable china counterparts. :D
 
Status
Not open for further replies.
Important Forum Advisory Note
This forum is moderated by volunteer moderators who will react only to members' feedback on posts. Moderators are not employees or representatives of HWZ Forums. Forum members and moderators are responsible for their own posts. Please refer to our Community Guidelines and Standards and Terms and Conditions for more information.
Top