MyRepublic fibre - Part 4

Status
Not open for further replies.

Silkworm

Master Member
Joined
Jun 12, 2000
Messages
4,006
Reaction score
0
one thing I don't quite understand is why Teleport can only work with select streaming settop boxes as well as severely limited contents while using them.

correct me if i'm wrong, but aren't all settop boxes connected to the same router in your home which supplies the same DNS to all devices in your home? And that DNS is dictated by MR so why are you able to watch so many streaming services on PC but not as much on phones/tablets/boxes?

whats the crippling factor here?
 

eriol125

Senior Member
Joined
Aug 19, 2006
Messages
2,090
Reaction score
5
Our installer are working extremely hard, rushing from places to places to get everyone's connection up.

Even machine cannot tahan (Car broken down) =(. So please bare with them if they are late by a little or so.

And going to wrong places for appointment due to the people in the office. Please don't sabo them anymore...
 

imacbie

Supremacy Member
Joined
Jul 3, 2004
Messages
6,405
Reaction score
2
Try manually inputting the DNS into the iPad.

no go also.

one thing I don't quite understand is why Teleport can only work with select streaming settop boxes as well as severely limited contents while using them.

correct me if i'm wrong, but aren't all settop boxes connected to the same router in your home which supplies the same DNS to all devices in your home? And that DNS is dictated by MR so why are you able to watch so many streaming services on PC but not as much on phones/tablets/boxes?

whats the crippling factor here?

some devices have the preferred dns hard coded into the device.
so need extra step to bypass that
 
Last edited:

shingo86

Member
Joined
Mar 19, 2002
Messages
259
Reaction score
11
Hi Representative of MR,

How can i reached anyone of you?

1) I've called hotline for days without anyone picking up.
2) I've sent email to customer service & Solomon Teo without any response.
3) The live chat function seems permanently offline.

Regards,
Customer ID: C1005736
 

creator88

Senior Member
Joined
Nov 16, 2007
Messages
576
Reaction score
37
Hi Representative of MR,

How can i reached anyone of you?

1) I've called hotline for days without anyone picking up.
2) I've sent email to customer service & Solomon Teo without any response.
3) The live chat function seems permanently offline.

Regards,
Customer ID: C1005736

Repost: For the benefit of all the other folks who are in a similar situation (e.g. last minute cancellations, no-shows etc etc), I have created a simple guide as to the possible steps you can take as an irate customer.

(1) Call the MR 24/7 hotline at : 6436 6638
• Expect for calls to be unanswered due to heavy call traffic and insufficient MR manpower
• Should you be lucky to get through, do record your call to avoid any miscommunication or misunderstandings in the future
• If nobody picks up, you can try your luck with their business sales hotline at: 6436 6618

(2) Email MR at myservice@myrepublic.com.sg
• Do remember to record down your ticket number etc

(3) Contact MR via their livechat on their webpage http://www.myrepublic.com.sg

(4) Contact MR management via email or personal visit to their office
• Malcolm Rodrigues: CEO & Co-founder
• KC Lai: Chief Commercial Officer & Co-Founder
• Greg Mittman: V.P. & Co-Founder
• Lawrence Chan: Head of Business Development and Product Management

(5) Contact Opennet directly to verify the cause of delay / cancelled appointment. Hotline number: 6563 4273 or email: info@opennet.com.sg , ask@opennet.com.sg

(6) Complain to Infocomm Development Authority of Singapore (“IDA”) and Ministry of Communication and Information (“MCI”)
• Minister for Communications and Information, YAACOB Ibrahim ( yaacob_ibrahim@mci.gov.sg )
• Senior Minister of State, Lawrence WONG ( lawrence_wong@mci.gov.sg )
• Minister of State, Ms SIM Ann ( sim_ann@moe.gov.sg )
• Permanent Secretary of MCI, Aubeck KAM ( mci_aubeck_kam@mci.gov.sg )
• Executive Deputy Chairman of IDA, Steven Robert LEONARD ( steve_leonard@ida.gov.sg )
• Managing Director of IDA, Ms Jacqueline POH ( jacqueline_poh@ida.gov.sg )
• Senior Director (Next Generation Infrastructure), Philip Heah ( philip_heah@ida.gov.sg )

(7) Contact HWZ user louischin at louischin78@gmail.com who is planning to organize a joint petition / complaint about MR and Opennet to IDA
 

nivleK1985

Senior Member
Joined
Feb 20, 2005
Messages
1,710
Reaction score
0
Hi Representative of MR,

How can i reached anyone of you?

1) I've called hotline for days without anyone picking up.
2) I've sent email to customer service & Solomon Teo without any response.
3) The live chat function seems permanently offline.

Regards,
Customer ID: C1005736

hi so sorry must have miss it. Could you drop me a PM with your situation?
 

WindJammer

Member
Joined
Jul 7, 2006
Messages
481
Reaction score
2
The speed shown in your LAN or WIFI settings is not reflective of the actual speed you will get, because as long as the connection is gigabit/wifi speed it will just reflect it according. Example: u get a lousy router with gigabit, it will show 1Gbps but u sure as hell won't get 1Gbps because its a chui router. This applies to your LAN or wifi card as well. If you computer has gigabit LAN but very old there is a higher chance that it will not support the actual 1Gbps speed. Basically its as useful as only telling you if your stuffs are connected correctly

Since your Realtek RTL8723AU is a wireless N and using 2.4Ghz band, and u are connected at 150Mbps I am sure your windows wifi card settings is connected at 20Mhz (which u should set to 40Mhz or auto) OR that your Asus router 2.4Ghz band is defaulted to 20Mhz only (again set it to 40Mhz). After doing that you will see it jump up to 300Mbps (I assume your wifi card is a normal wireless N card) but that doesn't mean that your actual speed will increase. Basically its the same idea as the LAN speed I've explained earlier on.

What you should do is to connect at the 5Ghz spectrum to hope for any improvements, however u will not see 1Gbps speeds because AC68 max you will get around 200-300Mbps and thats with an wireless AC adaptor. This applies to your USB-N53 as well.

Hi Leh. .
Very much appreciated your advice. I had actually set my window setting to 40Hz and it max at 150mbps.
Will try to monitor the situations these few days. Hope those member which having the same scenerio will also benefit from your advises.
 

SkatyBoy

Member
Joined
Apr 27, 2012
Messages
297
Reaction score
0
MR came down to install my fiber yesterday. End up, OpenNet TP has no signal, so it's OpenNet's fault now. Why is the TP off in the first place? Why MR cannot liase with OpenNet to check the infrastructure first before making a wasted trip?

Will I be bumped to the back of the queue (i.e. be one of the last ones to get wired up)? Any priority? I don't have internet connection in my house now and I am wasting my data plan to surf on my laptop. Oh yeah, waste of leave
 

xRenol

Supremacy Member
Joined
Dec 27, 2011
Messages
7,243
Reaction score
194
Delays in 1Gbps broadband delivery on The Straits Times April 5, 2014

1923093544d56e9613cf00faaf4a903ef6b19482.jpg
 

henrylim1972

Senior Member
Joined
Jul 4, 2011
Messages
1,355
Reaction score
0
Delays in 1Gbps broadband delivery on The Straits Times April 5, 2014

1923093544d56e9613cf00faaf4a903ef6b19482.jpg


I am starting to get this ridiculous speed this morning after all these bad / negative news today:


XRWKqmy.gif


( I have never ever been able to get more than 900)

MR, whatever you are doing wrong ..... keep doing it !! Jokes aside, you guys rock !! I know it's tough in this business .. going up against the 3 colors ... Customer Service is always tough and especially so in Singapore whereby each consumer is demanding ...
 

aptget

Supremacy Member
Joined
May 6, 2001
Messages
8,427
Reaction score
1
MR came down to install my fiber yesterday. End up, OpenNet TP has no signal, so it's OpenNet's fault now. Why is the TP off in the first place? Why MR cannot liase with OpenNet to check the infrastructure first before making a wasted trip?

Will I be bumped to the back of the queue (i.e. be one of the last ones to get wired up)? Any priority? I don't have internet connection in my house now and I am wasting my data plan to surf on my laptop. Oh yeah, waste of leave

Ahh.. OpenNet AGAIN .... Was in same situation yesterday. PM one of the admins here, they'll sort it out within the same day
 

Johnnny

Member
Joined
Apr 22, 2013
Messages
246
Reaction score
0
I am starting to get this ridiculous speed this morning after all these bad / negative news today:


XRWKqmy.gif

I showed one of our engineers this and he laughed... "We didn't even know there was going to be an article on us today!"

Thanks for the encouragement Henry. We have a few suspicions on the reasons for the inconsistent speed tests, but right now our engineers are more concerned about actual performance of the 1Gbps. Speed tests are an indication, but not a reflection of how they might actually perform.

So for now, they're looking more into things like Android uploading issues. Once that is fixed, we'll look into the Speed test inconsisntencies.
 

Johnnny

Member
Joined
Apr 22, 2013
Messages
246
Reaction score
0
MR came down to install my fiber yesterday. End up, OpenNet TP has no signal, so it's OpenNet's fault now. Why is the TP off in the first place? Why MR cannot liase with OpenNet to check the infrastructure first before making a wasted trip?

Will I be bumped to the back of the queue (i.e. be one of the last ones to get wired up)? Any priority? I don't have internet connection in my house now and I am wasting my data plan to surf on my laptop. Oh yeah, waste of leave

Really sorry about the delay SkatyBoy, but I can assure you that all such cases (we call them failed installations) are at the top of the priority queue, not the bottom, and is being looked into by a separate team.

We do check with OpenNet... but when they don't tell us there's an issue, we won't know until we go down also. :(

Can you send DM me your Customer ID or email address? We'll help to track this for you.
 

tmour

Junior Member
Joined
Aug 17, 2001
Messages
25
Reaction score
1
Connection back on...

2nd day come back from work, 1st thing test the MR connection... guess nothing is change, there goes the 1Gbps connection. It really make you happy for just for 1 week and now the bandwidth is been control now.


OK this morning do some experiment to test connect directly to ONT and got this result
ScreenShot2014-04-05at85219am_zpsc6083e72.png


So the problem is from the router I guess. So now to get back the connection I have the first week? Here is what I did.

1) Download the latest FW from ASUS RT-AC68U Firmware version 3.0.0.4.374.5047

Test the connection still same very low ~ 350+ Mbps down and 450+ Mbps Up :(

2) Reset the router to default factory and start from beginning. Setup all the wireless blah blah...

Test the connection and this is what I get :)
ScreenShot2014-04-05at11606pm_zps6fbb1c75.png


I hope this is permanent, cause is annoying if we have to do this every time if we detected our connection did not hit the mark. Indeed 300Mbps for me is already good enough just that we consumers would like to have what we subscribe for right?

Will keep monitor till next week and see how it goes.

Hi nivleK1985, thank for the pointer, I keep you inform if I find any abnormal connection.

Cheer guys
 

Silkworm

Master Member
Joined
Jun 12, 2000
Messages
4,006
Reaction score
0
2nd day come back from work, 1st thing test the MR connection... guess nothing is change, there goes the 1Gbps connection. It really make you happy for just for 1 week and now the bandwidth is been control now.


OK this morning do some experiment to test connect directly to ONT and got this result
ScreenShot2014-04-05at85219am_zpsc6083e72.png


So the problem is from the router I guess. So now to get back the connection I have the first week? Here is what I did.

1) Download the latest FW from ASUS RT-AC68U Firmware version 3.0.0.4.374.5047

Test the connection still same very low ~ 350+ Mbps down and 450+ Mbps Up :(

2) Reset the router to default factory and start from beginning. Setup all the wireless blah blah...

Test the connection and this is what I get :)
ScreenShot2014-04-05at11606pm_zps6fbb1c75.png


I hope this is permanent, cause is annoying if we have to do this every time if we detected our connection did not hit the mark. Indeed 300Mbps for me is already good enough just that we consumers would like to have what we subscribe for right?

Will keep monitor till next week and see how it goes.

Hi nivleK1985, thank for the pointer, I keep you inform if I find any abnormal connection.

Cheer guys


We need to find out what is the root cause on our router (mostly asus class router) that is somehow restricting the bandwidth, only to reach full capacity upon hard reset.

Cannot be always resetting when bandwidth reach below optimum level right? Like that we very busy.
 
Status
Not open for further replies.
Important Forum Advisory Note
This forum is moderated by volunteer moderators who will react only to members' feedback on posts. Moderators are not employees or representatives of HWZ Forums. Forum members and moderators are responsible for their own posts. Please refer to our Community Guidelines and Standards and Terms and Conditions for more information.
Top