Nintendo Switch thread

[BigMonkey]

Any idea if it is the same way as singtel router?

My wifi is connected via powerline.. and get about 35 D / 18 U

powerline have a lot of factors that will interfere with the speed and stability of data network.

using powerline is not a good way to determine the true speed u r getting.

 

[rockdjlow]

powerline have a lot of factors that will interfere with the speed and stability of data network.

using powerline is not a good way to determine the true speed u r getting.

Ok thanks, if I really wanna to set mtu as per research 1472 or 1492 is the best figure to enter?

 

[Op_Valkyrie]

you have to check your router and network switch RJ45 port, make sure both support 1G instead of 10/100

Also do a network packet trace to see which test server location is the nintendo switch connecting to.

Bro... I'm ccna ccnp trained... lol

Thanks for your advice anyway...

 

[Op_Valkyrie]

Got it to work...lol... no need throw liao...

Weird thing.... need to restart (power on/off) my switch then it works properly...

 

[rockdjlow]

Got it to work...lol... no need throw liao...

Weird thing.... need to restart (power on/off) my switch then it works properly...

What have you done? Just restart nia?

 

[Op_Valkyrie]

What have you done? Just restart nia?

Ya Loh... knn... waste my time...

 

[BigMonkey]

Ok thanks, if I really wanna to set mtu as per research 1472 or 1492 is the best figure to enter?

u r setting mtu on which network device? you need to calculate the overhead that your powerline is using and overhead for wifi data packet as they have extra overhead as compared to wired. u need to do all the calculation then you can know the mtu that you want to set.

 

[halocast]

Standing next to my router I only get 35 down and 9 up.

Wireless

 

[BigMonkey]

Bro... I'm ccna ccnp trained... lol

Thanks for your advice anyway...

glad u r trained. i have colleague who r trained and got the cert but dunno shyt when i told them the logic of tcp/ip, acl, etc

 

[Op_Valkyrie]

Also if u not using jumbo frame throughout ur LAN... please don set any crazy mtu settings... lol

 

[Op_Valkyrie]

glad u r trained. i have colleague who r trained and got the cert but dunno shyt when i told them the logic of tcp/ip, acl, etc

That's y first thing I always check is physical, hardware before checking layer 2-4...

Bo bian... I bao mountain bao sea need to know system, application, network and security....

 

[pegasus21]

glad u r trained. i have colleague who r trained and got the cert but dunno shyt when i told them the logic of tcp/ip, acl, etc

Well some people just cram brain dumps and don't have practical experience. It doesn't take much effort to pass CCNA/CCNP in that way. CCIE is a different story.

That's y first thing I always check is physical, hardware before checking layer 2-4...

Bo bian... I bao mountain bao sea need to know system, application, network and security....

Haha sounds like my job too.

 

[Op_Valkyrie]

Well some people just cram brain dumps and don't have practical experience. It doesn't take much effort to pass CCNA/CCNP in that way. CCIE is a different story.



Haha sounds like my job too.

Like testking ftw.... ccie need to see practical liao mah (and it's expensive).... so bo bian... that's why u don often see it as job requirements. Nearly went to aus to took ccie... heng bo...

Nowadays all SDN and NFV liao.... lol

U also bao everything ah? Power lah bro... ^5

 

[Gametaku]

Poor critic reviews but still managed to hoot physical copy of has been heroes. User reviews on metacritic aren't that bad.. 75/100.

 

[Op_Valkyrie]

Poor critic reviews but still managed to hoot physical copy of has been heroes. User reviews on metacritic aren't that bad.. 75/100.

Mine coming via eBay

 

[XseanX]

Got it to work...lol... no need throw liao...

Weird thing.... need to restart (power on/off) my switch then it works properly...

Universal solution to t/s all IT problem... restarting you device...~~"

 

[Op_Valkyrie]

Universal solution to solve all IT problem... restarting you device...~~"

Lol... that's right bro... that's right...

 

[marc781]

anyone selling n2elite here?

 

[bernier]

Got it to work...lol... no need throw liao...

Weird thing.... need to restart (power on/off) my switch then it works properly...

Sick speed. What router you using?

If anyone wants to hoot cheap usb3 lan adaptor can get here.
https://www.aliexpress.com/item/Ugr...-network-card-for-Windows-10/32400737540.html

 

[pegasus21]

Universal solution to t/s all IT problem... restarting you device...~~"

Haha... Windows Admin way of thinking.

Like testking ftw.... ccie need to see practical liao mah (and it's expensive).... so bo bian... that's why u don often see it as job requirements. Nearly went to aus to took ccie... heng bo...

Nowadays all SDN and NFV liao.... lol

U also bao everything ah? Power lah bro... ^5

Yea SDN and NFV changes things. I don't think it will be universally adopted so soon.