[Official] Home Automation Thread

Vulpix

Moderator
Moderator
Joined
Jan 1, 2000
Messages
105,337
Reaction score
3,864
I guess based on the feedback by seniors here, I will go with dumb switch + smart bulb.

With that I won't need to pull neutral wires as well.

Cheers,
P

Before you decide further, please watch this:

 

pajamasguy

Junior Member
Joined
Sep 28, 2007
Messages
83
Reaction score
0
Thanks for the quick replies.

Been watching videos on comparing both products. very close i think.

Overall, leaning towards Philips given its slightly wider product range. Also I found there is actually 3rd party? philips switch adaptors. I don't have to dismantle my existing dumb switches. Just peel out the old switch and use the adaptor with the smart philips switch. Quite neat. Not sure of the fitting of the adaptors for SG market though. Anyone tried that?

Separately, for SG market, which kind of bulb I should be using?

Cheers,
P
Nothing can come close to LIFX
If you choose Hue then can consider Yeelight as well
 

porker997

Junior Member
Joined
Aug 15, 2007
Messages
59
Reaction score
0
excellent video sir! thank you. helps me. think mix and match will work best depending on the room. since my project will be my family room and study...the video discussed that.

Maybe the kitchen, i neutral wire it to be ready
 

GundamG

Arch-Supremacy Member
Joined
May 17, 2004
Messages
23,261
Reaction score
3,469
dun like to automate stuff too much unless living in landed. HDB so small automate for what...
 

pajamasguy

Junior Member
Joined
Sep 28, 2007
Messages
83
Reaction score
0
I have heard complaints that Yeelight not very bright, any comments? You own Yeelights right?
They are all not very bright (at least for me) except Lifx
I dont have real experience with them though but just going by the lumens.
 

porker997

Junior Member
Joined
Aug 15, 2007
Messages
59
Reaction score
0
I was at Centerpoint Orchard earlier today and there was a Jung switch showroom! Got the card and brochure didn’t have time to chat.
 

plustwo

Arch-Supremacy Member
Joined
Dec 28, 2009
Messages
12,689
Reaction score
580
They are all not very bright (at least for me) except Lifx
I dont have real experience with them though but just going by the lumens.
they are very bright. i have the 2nd gen color and tunable. one bulb on max brightness can illuminate one room + hallway at night by itself. the 1st gen is noticeably dimmer and the color not as pretty.
 

squidy

Senior Member
Joined
Oct 26, 2005
Messages
1,444
Reaction score
3
Guys, anyone turn their non smart led strip into a smart led strip using this?
"FIBARO RGBW Controller"
 

waterfoe

Junior Member
Joined
Jan 21, 2002
Messages
71
Reaction score
0
If you get a proper quotation from Jung, the price will give u a shock big time.... But some of their keypads are quite nice...

But still given a choice, i will go with either Lutron or Control4....

I was at Centerpoint Orchard earlier today and there was a Jung switch showroom! Got the card and brochure didn’t have time to chat.
 

waterfoe

Junior Member
Joined
Jan 21, 2002
Messages
71
Reaction score
0
When the first iphone was launch, many people are saying "why need the iphone whereby the normal phone can serve it purpose" fast forward 12 years... Can you live without a smart phone now?

dun like to automate stuff too much unless living in landed. HDB so small automate for what...
 

pustefix

Senior Member
Joined
Feb 6, 2012
Messages
537
Reaction score
10
This is my humble HDB and the automation in it. It is my main tab in Home Assistant interface and provide an overview of the status of my devices.
kWr3kyE.jpg

- Person icons are motion sensor, square icons are door sensor and bulbs are either smart bulb or smart switch.
- Cast icons are my Google home devices, the one in living room is playing some music.
- Temperature and humidity sensors in each room and in the hall.
- The word "Docked" is where my roborock S5 is, it will clean when no one is around (more on this later).
- The snowman and umbrella icons are to indicate if there is holdiay for kids and parents. It is updated by fetching events from Google calendar.
- The bus icon is to show the arrival timings of a particular bus. It is obtained from LTA API.
- The bottom row is to show presence of each occupant, it is obtained from their phone connection to my router. Automation can be based on whether there is someone at home or not.
 

terminater

Member
Joined
Sep 1, 2014
Messages
121
Reaction score
11
Bros, any smart light switch to recommend? Hope it is not too costly. Have been looking at tp link hs200 but can't seem to find in sg? Any advice where to get or any other models? Thanks :)
 

yamashita

Moderator
Moderator
Joined
Dec 23, 2000
Messages
9,676
Reaction score
51
This is my humble HDB and the automation in it. It is my main tab in Home Assistant interface and provide an overview of the status of my devices.
kWr3kyE.jpg

- Person icons are motion sensor, square icons are door sensor and bulbs are either smart bulb or smart switch.
- Cast icons are my Google home devices, the one in living room is playing some music.
- Temperature and humidity sensors in each room and in the hall.
- The word "Docked" is where my roborock S5 is, it will clean when no one is around (more on this later).
- The snowman and umbrella icons are to indicate if there is holdiay for kids and parents. It is updated by fetching events from Google calendar.
- The bus icon is to show the arrival timings of a particular bus. It is obtained from LTA API.
- The bottom row is to show presence of each occupant, it is obtained from their phone connection to my router. Automation can be based on whether there is someone at home or not.

Very comprehensive and impressive! :love:

Which sensor are you using for the temperature reading?

For the family members' presence, do you happen to be using Samsung presence sensor? I'm using one at the moment to automate my car porch lightings (when car arrives home, switch on car porch lightings), but the sensor is hit and miss at times as the zigbee signal isn't that strong.

Looking for an alternate solution if there's one.
 

pustefix

Senior Member
Joined
Feb 6, 2012
Messages
537
Reaction score
10
Which sensor are you using for the temperature reading?

For the family members' presence, do you happen to be using Samsung presence sensor? I'm using one at the moment to automate my car porch lightings (when car arrives home, switch on car porch lightings), but the sensor is hit and miss at times as the zigbee signal isn't that strong.

I'm using Xiaomi Aqara temperature and humidity sensor. The first gen is a round one while gen 2 is a square one. Gen 2 seems to update more frequently than gen 1.

The family members' presence is based on their phone wifi connection to my router. Other method I know of include using bluetooth on Google Home or Raspberry Pi. The wifi method is working fine for me so I've yet to try others.
 

Vulpix

Moderator
Moderator
Joined
Jan 1, 2000
Messages
105,337
Reaction score
3,864
Very comprehensive and impressive! :love:

Which sensor are you using for the temperature reading?

For the family members' presence, do you happen to be using Samsung presence sensor? I'm using one at the moment to automate my car porch lightings (when car arrives home, switch on car porch lightings), but the sensor is hit and miss at times as the zigbee signal isn't that strong.

Looking for an alternate solution if there's one.
You bought a Hubitat right? How is your experience so far?
 

yamashita

Moderator
Moderator
Joined
Dec 23, 2000
Messages
9,676
Reaction score
51
You bought a Hubitat right? How is your experience so far?

The whole ecosystem is being built up by the community and so far I am contented with it for my basic needs.

I am using a mix of zigbee and zwave products and all are supported:

  1. IKEA TRÅDFRI outlets (Zigbee)
  2. Samsung SmartThings outlets (Zigbee)
  3. TKB outlets (Zwave)
  4. Some zwave 2-gang switches (Zwave - cant recall the brand)
  5. Samsung Presence Sensor (Zigbee)
  6. Xiaomi Mijia button (Zigbee)

Drivers are developed either in-house or by the community. For Xiaomi zigbee products, it's community-developed with the core development/updates done for ST first before it's ported over to Hubitat. I have tested Xiaomi smoke sensor and it works fine, but I have yet to deploy it.

On a side note, I notice that Zwave performs better than zigbee, I suspect it's interference from my router.

My dashboard is still lacking, let me spend some time on it before i share it. :)
 
Important Forum Advisory Note
This forum is moderated by volunteer moderators who will react only to members' feedback on posts. Moderators are not employees or representatives of HWZ Forums. Forum members and moderators are responsible for their own posts. Please refer to our Community Guidelines and Standards and Terms and Conditions for more information.
Top