Ok bro thanks. Today I go reset everything and then do properly. Just to make sure.
After reset:
1)start up ont. all lights green
2) start up my Asus router. All lights up
3)Connect Asus router Wan port to ont port 1 using lan cable
4) do the basic configuration of router via lan cable which is connected to iMac
5) switch the vlan tagging profile to Singtel MioTV
6) restart both ont and Asus router
7) connect airties mesh A port 1 using lan cable to Asus router port 4
8) connect airties mesh B port 1 using lan cable to singtel mio tv.
Am I right. ? Did I miss any restart/procedure ?
I can confirm this set up works if you want to connect singtel mio tv wirelessly using airties mesh + Asus router.
Big thanks to renfred. So the set up is this for anyone who wants to try.
Tp-> (optic cable) -> singtel ont -> (ethernet cable) -> Asus Router -> (ethernet cable) -> Airties mesh 1 -> (wireless) -> airties mesh 2 -> (ethernet cable) -> singtel mio tv.
1) reset all your devices ( ont, ASUS router, both airties mesh, singtel miotv)
2) turn on ont. wait for all the lights to be green
3) turn on ASUS router. Make sure Wan port is connected to ont. wait for all lights to be stable
4) connect router to computer using ethernet cable. (Can use the wifi also)
5) configure the vlan profile. Select singtel-others. This will block port 4 of ASUS router for miotv. Save settings
5) turn off both router and ont. wait about 30 seconds.
6) turn on ont. all lights to be green
7) turn on ASUS router. All lights stable
8) turn both airties mesh on and wait for both to be linked ( stable light on both device)
9) connect airties mesh 1 to port 4 of ASUS router using ethernet cable
10) wait for 30 seconds
11) connect miotv to airties mesh 2
12) wait 30 second.
13) turn on singtel tv and wait 2 mins
It should work fine. I don’t have any signal problem since last night. It’s working well. Hope it work well for everyone else who wants to do a similar setup.