Opennet installion - share experience please

[starsandstripes]

Hey guys, can anyone staying in a Maisonette describe their OpenNet installation? I'm having difficulties finding the best spot for the Terminal point.

 

[chaicka]

Improvements on FTP Deployment

It seems the complaints and comments made have yield improvements on deployment of the Fiber Termination Point.

Here is a list of the improvements:

1. Photos taken of the installed FTP,
2. Photos taken of the measurement meter readings,
3. Measurement readings hand written on the "Fibre Installation Service Report" sheet after actual measurement being done (no more pre-printed fake measurement readings).

There are still areas of improvements:

1. Communications - Sufficient advance notice to inform RSP and Customer of appointment schedule. 24 hours or less is NOT acceptable and customer should reserve the rights to reject under such circumstances without being threaten (eg. threaten of extra charges).

 

[benyap90]

1310nm : 0.90dB
1490nm : 0.90dB
1550nm : 0.82dB

is it good? my just installed today

 

[ideatalk]

Got my TP's 2nd Port activated today. Basically Opennet added one more fibre line outside my home and connected it to my home's TP 2nd port.

Anyway, the signal strength reading of the 2nd port is better then the first's.

1310nm : 0.44dB
1490nm : 0.36dB
1550nm : 0.30dB

1st port signal stength below

1310nm : 0.63dB
1490nm : 0.59dB
1550nm : 0.50dB

u mean u got 2 active ports? can plug your own RG to it?

 

[ceecookie]

u mean u got 2 active ports? can plug your own RG to it?

Yes I have 2 active port. The second port is in used by ViewQwest's ONT cum router. The first port is no longer used but still leased to Nucleus Connect for 8 months or so.

Doubt you can plug your own RG to it

 

[Boltersdriveer]

Yes I have 2 active port. The second port is in used by ViewQwest's ONT cum router. The first port is no longer used but still leased to Nucleus Connect for 8 months or so.

Doubt you can plug your own RG to it

Nope, you can't. Don't have the ONT in any case.

 

[ideatalk]

to run both port, each port need to have its own ont rite?

 

[Mach3.2]

to run both port, each port need to have its own ont rite?

Yes.. .

 

[pheliosstar]

1310nm : 0.90dB
1490nm : 0.90dB
1550nm : 0.82dB

is it good? my just installed today

It's a little on the high side...

 

[Xtreme_Funktions]

how many weeks in advice will open net send the letter before they go down for installation?

 

[silverstone]

how many weeks in advice will open net send the letter before they go down for installation?

probably b4 1 mth...?

 

[Xtreme_Funktions]

probably b4 1 mth...?

thanks

website state after june.. if like that.. haiss.. such a long wait..

 

[ideatalk]

June Not too long

 

[BlurKillerEX]

After installation how to know if its activated ah? Mine TP was installed last month 23rd, now over a month alr.

 

[asiafrenz]

After installation how to know if its activated ah? Mine TP was installed last month 23rd, now over a month alr.

mine was installed with termination point few months ago and had also received letter from opennet that i can go ahead to get fibre broadband but just last saturday was supposed to be installed with fibre broadband by isp and guess what? No signal at the termination point! it was not activated at all! and now have to wait for opennet to schedule a date to activate! Isn't that ****ty work done by opennet?

 

[Kiwi8]

After installation how to know if its activated ah? Mine TP was installed last month 23rd, now over a month alr.

Around 6 weeks, but u can check the website by putting in your household address (all the way to the unit number):
OpenNet » Coverage Check

If it's not ready, the message will be:
"OpenNet is in the midst of deploying the Next Gen NBN to your building..."

If it's ready, the message will be:
"Your residential premise is ready for Next Gen NBN services..."

 

[BlurKillerEX]

mine was installed with termination point few months ago and had also received letter from opennet that i can go ahead to get fibre broadband but just last saturday was supposed to be installed with fibre broadband by isp and guess what? No signal at the termination point! it was not activated at all! and now have to wait for opennet to schedule a date to activate! Isn't that ****ty work done by opennet?

Wah suay sia, if not ready why still send you letter, dafuq are they doing. But install few months still not ready, omg, I hope I dun have to wait THAT long...

Around 6 weeks, but u can check the website by putting in your household address (all the way to the unit number):
OpenNet » Coverage Check

If it's not ready, the message will be:
"OpenNet is in the midst of deploying the Next Gen NBN to your building..."

If it's ready, the message will be:
"Your residential premise is ready for Next Gen NBN services..."

Oh, thanks for the info

 

[lifesgood]

Not sure if this is the right place to ask, but is there a service provider that includes free installation of fibre broadband point in my flat? I've recently moved into my HDB flat but the previous owner never take up Opennet's offer on installation

 

[chengsun]

Not sure if this is the right place to ask, but is there a service provider that includes free installation of fibre broadband point in my flat? I've recently moved into my HDB flat but the previous owner never take up Opennet's offer on installation

NO.................

 

[gobbyyy02]

how many weeks in advice will open net send the letter before they go down for installation?

I got mine about 1 month. Staying in condo.