Stop stress testing. Go into BIOS and reset to default. (no overclock)
How are you cooling your cpu
Stock cooler. The the monitor isnt receiving signal from the desktoppp
Stop stress testing. Go into BIOS and reset to default. (no overclock)
How are you cooling your cpu
I turned it off and when i turned it on again the monitor is not getting any signal from the desktop. It says no dvi signal or something. Why is this happening omg
Pull out the little battery on the motherboard for about a min , and then place it back.
-update- now the com managee to turn on . Should i not OC anymore? Gosh this is scary as all hell
I suggest not. Go read up via YouTube or website first before attempt. If knowledge is zero and just depends on a thread here is very unproductive.
I did read up on some website. Things were going smoothly until suddenly the test kept saying hardware failure followed by a blackout.
Do you know if the cpu temp i shld be look at is the one classified under mobo cpu temp or ryzen temp?
Ryzen cpu temp.
Is 75c avg and 83max too high then? It was at that temp when it crashed. Or was voltage too low lol
System crash due to stress test is NORMAL! If crash means oc failed. Restart pc go back bios and reset to default. Then lower your frequency lor.
Told you don't oc too high. Your boost clock is 3.6. Getting 3.75 on stock cooler is good enough. Those temps are not even close to failure temp. Cpu normally shut down when hitting above 90 deg. It crashes earlier due to frequency too high and insufficient voltage.
Sent from Overpowered Phone Mark III using GAGT
majority of them in amdk ambient and not using stock cooler...I was didnt go higher than 3.75 mhz though, i actually reverted back to the settings i started with at 3.75mhz n 1.275v then it failed.
I was so ****ing scared lol the monitor couldnt be turned on didnt know i had to let the pc rest forawhile before reboooting
Anyway i am now on 3.7mhz n 1.25v but the avg temo is 79c n 81c max. Isnt that very high? All the other results i seen in reddit etc are like 60+temp mine is insane. Shld i off the oc or am i doing something wrong
Let your pc cool down first before trying again.I was didnt go higher than 3.75 mhz though, i actually reverted back to the settings i started with at 3.75mhz n 1.275v then it failed.
I was so ****ing scared lol the monitor couldnt be turned on didnt know i had to let the pc rest forawhile before reboooting
Anyway i am now on 3.7mhz n 1.25v but the avg temo is 79c n 81c max. Isnt that very high? All the other results i seen in reddit etc are like 60+temp mine is insane. Shld i off the oc or am i doing something wrong
Stock cooler. The the monitor isnt receiving signal from the desktoppp
Is it? AMD Wraith Spire rated at 95W TDP while 1600 is 65W TDP. You can oc for sure. Just not that much. Pay what you get. Free cooler, mediocre oc. Simple as that. Not like ts need that much of speed also.Aiyo. Stock cooler is not meant for overclock.
Get a Cryorig or a CM 212
Let your pc cool down first before trying again.
Nothing to be scared. Best thing about Ryzen, AMD support oc and warranty still applies. Nothing to worry.
Leave it as it is for now. Your silicon lottery not as good as mine lol. Your temps looks okay. Reddit mostly from ang mo country. Either with air cond or their ambience temp not as hot and humid as us. Don't compare. Your result is more accurate comparing to those in this forum.
Sent from Overpowered Phone Mark III using GAGT
But why bother to oc a mere 100mhz?
Correct. Only 1 or 2 cores is boosted while the rest stay at base clock. Manage to oc till 3.7 on all 6 cores using stock cooler.thing is the auto boost only boost one core to 3.6, the other core are lower clocked, cant remember exactly 3.2 on the rest?
vs ownself oc which u can maintain all core at 3.7.