R/C Hobbyist thread

[TheoDR]

is anyone here into R/C plane one?

R/C plane got what engines available to make it fly huh?

I think gotchs brushless and nitro engines...

 

[TheoDR]

chius is getting more crazier! i intend to get the drift tires... tat should be for better drifting on cement rather then pvc on tarmac...

i try to make more time... since march is ending.... April shall restart the drift meets.... i try to settle down by march i guess...

Chius getting married to which TTSH nurse??

 

[slamdunk7]

I think gotchs brushless and nitro engines...

any website got more infos on that huh..

the propulsion izit only by propellers and no other way?

 

[Matrix23x]

Chius getting married to which TTSH nurse??

hw i wish leh ... the ones working here not as pretty as those vistors... hw ar?

settle my work

 

[zzyzx]

hi bros... just came back from work... going to get my TT01 tomolo.

yeah!!

apart from TT01, i'll be getting the blue alu main shaft, tamiya full set ball bearing, PVC tyre and might get a rally rim, 3700mAh batt, metal motor mount and heatsink.

if a harder coilover is not too ex, might get it too...

oh yah... wondering if the TT01 comes with ESC, steering servo, and receiver...

edit: will be getting the tamiya anti-wear grease to fill my rear gear differential casing

 

[zzyzx]

btw how do you guys hide the antenna huh? i see some of the cars got no ulgy antenna exposing...

 

[TheoDR]

any website got more infos on that huh..

the propulsion izit only by propellers and no other way?

I think some larger scale ones have jet propelled! For planes motors etc, can check out www.castlecreations.com also

 

[TheoDR]

btw how do you guys hide the antenna huh? i see some of the cars got no ulgy antenna exposing...

We ish normally tie it around the rear body posts (for TT01) or use a spare bit of Lexan from the car body to fix to the chassis and then wrap the antenna around it.

 

[TheoDR]

hi bros... just came back from work... going to get my TT01 tomolo.

yeah!!

apart from TT01, i'll be getting the blue alu main shaft, tamiya full set ball bearing, PVC tyre and might get a rally rim, 3700mAh batt, metal motor mount and heatsink.

if a harder coilover is not too ex, might get it too...

oh yah... wondering if the TT01 comes with ESC, steering servo, and receiver...

edit: will be getting the tamiya anti-wear grease to fill my rear gear differential casing

Depending on which kit you get, the TT01 might come with ESC. So far the TT01 kits that come with ESC are the Nismo Skyline Z-Tune, Nismo Coppermix Silvia S15 ones, not sure about the spanking new sibei swee Mazda RX7 FD3S

Steering servo, transmitter n receiver comes seperately, depending which kit you choose. LOL, that sounds like a lot of mods! I changed my gf's car's susp setup to be lower and with hard springs, now the car handles a lot less sluggish

 

[tlkchew]

is anyone here into R/C plane one?

R/C plane got what engines available to make it fly huh?

yeah i fly RC planes.. but they are electric... i do not fly gas goz electric is cleaner.
motors.. plenty... check out.
www.modelmotors.cz
www.hacker.com

great motors!

Check out my plane!

 

[tlkchew]

is anyone here into R/C plane one?

R/C plane got what engines available to make it fly huh?

yeah i fly RC planes.. but they are electric... i do not fly gas goz electric is cleaner.
motors.. plenty... check out.
www.modelmotors.cz
www.hacker.com

great motors!

Check out my plane!

 

[zzyzx]

after one whole day of asseembling and doing up the body shell.....

can't wait to run it and start learning to drift with this babe.

btw when i press the throttle, is it normal to see sparks inside the motor? this is especially when i sudden full throttle it.

and also, where can i get the long type of pin to hold my bodyshell in north area? a bit troublesome to use 4 small pins since i got to open up the shell to connect/ disconnect the batt lead...

 

[zzyzx]

btw this are wat i got today. total damage is $482

ford forcus wrc TT01
fubata MJ
drift tire and speed mind rim
alu main shaft
made in jap full set of ball bearings
a can of white spray
2 x 3700mAh batt
2 x slow charger
metal motor mount
tamiya anti-wear grease

 

[tlkchew]

I think some larger scale ones have jet propelled! For planes motors etc, can check out www.castlecreations.com also

Did someone mentioned somthing about JETS??

check out the videos
http://www.rcuvideos.com/view_video.php?viewkey=d58e781d4f14173d41e5

Enjoy!

 

[tlkchew]

btw this are wat i got today. total damage is $482

ford forcus wrc TT01
fubata MJ
drift tire and speed mind rim
alu main shaft
made in jap full set of ball bearings
a can of white spray
2 x 3700mAh batt
2 x slow charger
metal motor mount
tamiya anti-wear grease

kewl.. gratz on your new car! hopping up as well i see!
i presume you will be using the tamiya ESC...
TT01 is a great car! did you get it from swan model?

 

[zzyzx]

kewl.. gratz on your new car! hopping up as well i see!
i presume you will be using the tamiya ESC...
TT01 is a great car! did you get it from swan model?

thanks bro... kenna poisoned by you guys... hee

ESC is included in the TT01 box. and yup from s'wan models... winnie guide me thru my purchase..

very excited... cannot get to sleep... haha

 

[TheoDR]

after one whole day of asseembling and doing up the body shell.....

can't wait to run it and start learning to drift with this babe.

btw when i press the throttle, is it normal to see sparks inside the motor? this is especially when i sudden full throttle it.

and also, where can i get the long type of pin to hold my bodyshell in north area? a bit troublesome to use 4 small pins since i got to open up the shell to connect/ disconnect the batt lead...

Woooo, congrats on your new baby! That's normal to see sparks. Not sure about where to get the long pins from north area though. What time did you go to Winnie's?

 

[TheoDR]

thanks bro... kenna poisoned by you guys... hee

ESC is included in the TT01 box. and yup from s'wan models... winnie guide me thru my purchase..

very excited... cannot get to sleep... haha

Remember to post peekture hor!

 

[tlkchew]

thanks bro... kenna poisoned by you guys... hee

ESC is included in the TT01 box. and yup from s'wan models... winnie guide me thru my purchase..

very excited... cannot get to sleep... haha

haha she is very good at "guiding" you through purchases
you need this, then how about this, then need this, battery need?

I presume you got the GP 3700 mah batts?
also did you get the battery connectors?
I am not sure how many amps the stock motor will generate underload, you may need to get better battery connectors if you upgrade your motor.

original tamiya connectors sometimes just cMI

enjoy!

 

[OniHibiki]

Emperor Reportings in. doin my rx7 n slivia in awhile post pict when i done.