SATA Cable Experiment - Does Quality Affect SSD Performance

tsteo77

Senior Member
Joined
Oct 28, 2011
Messages
1,542
Reaction score
216
This video prove that quality of sata cable affect ssd performance, assuming hdd and optical drive as well.
Anyone has replace their stock sata cable with after market high quality/performance cable ?
Which one did you get and is there any improvement ? Anyway i'm stll on sata for ssd and optical,
it's good enough for my gaming need.

 

Lynben

Banned
Joined
Jan 3, 2020
Messages
1,460
Reaction score
607
I wouldnt say quality but rather cables that meet specifications. It's just like lan cable. A cat 6 cable is obviously different in construction compared to cat5 and able to need necessary specs.

You can have a very expensive and fancy looking cable but it didn't meet the specs when tested.
 

Yongkit

Supremacy Member
Joined
Oct 9, 2015
Messages
5,904
Reaction score
2,493
This video prove that quality of sata cable affect ssd performance, assuming hdd and optical drive as well.
Anyone has replace their stock sata cable with after market high quality/performance cable ?
Which one did you get and is there any improvement ? Anyway i'm stll on sata for ssd and optical,
it's good enough for my gaming need.


In the video Linus say it have no different which cable he tested and with minimal margin of error as long as it works ?
 

Phen8210

High Supremacy Member
Joined
Jul 29, 2011
Messages
29,030
Reaction score
8,284
as long as it's built decently and works without issue no need to worry

content creators these days running out of content
 

86technie

High Supremacy Member
Joined
Jun 8, 2006
Messages
40,356
Reaction score
5,943
Doubt there are such thing as "high quality" SATA cable.

aisens-sata-3-data-cable-0.5-m.jpg


So long the cable have retention clip than it is a good cable compare with older SATA cable.

1001352-248882-800.jpg


Speed wise, it's not the quality of cable but rather what storage driver you are using.
AMD platform wise have to use the MS standard AHCI driver.
Intel wise depends, if there is Intel Rapid Storage driver/AHCI driver than use it.

I know some Intel build uses the MS standard AHCI driver, you can try the Intel Rapid Storage driver/AHCI
but that is if the PC is modern spec.
Older platform like H81, H87, Z87, H97/Z97 best to use the MS standard AHCI driver.

I did test in the past when I still have these old PCs before moving to Intel 9th gen.
 

tsteo77

Senior Member
Joined
Oct 28, 2011
Messages
1,542
Reaction score
216
In the video Linus say it have no different which cable he tested and with minimal margin of error as long as it works ?

as long as it's built decently and works without issue no need to worry

content creators these days running out of content
I did not on the sound when i watched this video, it's the benchmarking test score that tell me the difference. :)
DDoubt there are such thing as "high quality" SATA cable.

aisens-sata-3-data-cable-0.5-m.jpg


So long the cable have retention clip than it is a good cable compare with older SATA cable.

1001352-248882-800.jpg


Speed wise, it's not the quality of cable but rather what storage driver you are using.
AMD platform wise have to use the MS standard AHCI driver.
Intel wise depends, if there is Intel Rapid Storage driver/AHCI driver than use it.

I know some Intel build uses the MS standard AHCI driver, you can try the Intel Rapid Storage driver/AHCI
but that is if the PC is modern spec.
Older platform like H81, H87, Z87, H97/Z97 best to use the MS standard AHCI driver.

I did test in the past when I still have these old PCs before moving to Intel 9th gen.
During the days of IDE devices with ribbion IDE cables. These cables come in difference quality build and gauges.
I always go for the best quality guild and biggest gauge because i think that make a difference.

You're right, driver make a difference too.
 

86technie

High Supremacy Member
Joined
Jun 8, 2006
Messages
40,356
Reaction score
5,943
I did not on the sound when i watched this video, it's the benchmarking test score that tell me the difference. :)

During the days of IDE devices with ribbion IDE cables. These cables come in difference quality build and gauges.
I always go for the best quality guild and biggest gauge because i think that make a difference.

You're right, driver make a difference too.

IDE days really bring me back memories but IDE cables there are a lot of different types.

IDE_cable_40_pin_%26_80_pin.jpg


Is actually the number of pins on the right is IDE 80 pin cable which is required for over Ultra DMA mode 2 speed.

https://www.rigacci.org/docs/biblio/online/ide_modes/modes_UDMA.htm
The left cable is IDE 40 pin cable and this cable is slower which is commonly used for DVD drives or floppy drives since these drive don't need a fast connection unlike HDD.
When SATA came, it is just one standard cable no more different type of cable as well as need to set jumper settings etc.
 

TanKianW

Supremacy Member
Joined
Apr 21, 2005
Messages
6,899
Reaction score
3,604
Nice cables :D I like but then dont use lol

Really not much reasons to use unless building a custom NAS/storage servers these days. Normally you need a certain amount of storage density (subjected to deploy scenarios/specific use cases) to justify the use of such thin cables, which helps to alleviate the issues on cable mess in tight enclosures (rack or workstations)

Most PCs/laps mainly uses M.2 now.​
 
Last edited:

KleoZy

Supremacy Member
Joined
Jan 1, 2000
Messages
5,793
Reaction score
1,074

Really not much reasons to use unless building a custom NAS/storage servers these days. Really need a certain amount of storage density (deploy scenarios) to justify the use of such thin cables, which cut down on cable mess in tight enclosures.

Most PCs/laps mainly uses M.2 now.​
Yup.. but still those are good cables you've shown. I mean as in not so bulky and can bend accordingly without restriction.. good for super tight areas or small nas build. btw I have no idea what tsteo77 talking about lol.. Sata cables just use what comes with the mobo good enuff..
 

Gymrat76

Supremacy Member
Joined
May 8, 2003
Messages
7,851
Reaction score
80
The only reason I use SATAs are for NAS/storage servers now. The super thin ones I used these days. No problem so far.

2Uywb0X.jpg

xxyH3cM.jpg

Nice cables. Where did you get them? I'm using SATA for 2 SSDs I have on my old rig that are used mainly for storage and games. Stock cables work fine for me, just looking for thinner cables that maybe easier to cable-manage in my ITX build
 

tsteo77

Senior Member
Joined
Oct 28, 2011
Messages
1,542
Reaction score
216
TS is also the one proclaiming PC with fuseless plug perform better than PC with fused plug

And the one advocating messing with your house's fuse box. Clearly someone deprived of attention.
I'm honoured members of this forum still remember knowledge that i shared sometime ago. :giggle:

Anyway it's the right thing to do to use better cable for sata just like peoples would for display/audio/ethernet/usb.
You can't benchmarked the benefit, you have to play/use to benefit from it. I remember back in the days when i owned and play with
car/motobike. Replacing stock ignition spark plug cables clearly make a difference to acceleration.

Here you go for a good sata cable that i found for anyone interested at a good price > https://www.aliexpress.com/item/328...00028129644637!sea&curPageLogUid=KaX3TcO6APk4
 
Important Forum Advisory Note
This forum is moderated by volunteer moderators who will react only to members' feedback on posts. Moderators are not employees or representatives of HWZ Forums. Forum members and moderators are responsible for their own posts. Please refer to our Community Guidelines and Standards and Terms and Conditions for more information.
Top