StarHub MaxInfinity Fiber Optic - Experience

stilnox

Member
Joined
Aug 16, 2001
Messages
144
Reaction score
0
i know i am flash to padavan already.. but when doing the reset_ss.sh (1st time)
i get this "sh: reset_ss.sh: not found" normal? or the file already flush out le?
 

chuinwl

Member
Joined
Jun 19, 2001
Messages
117
Reaction score
0
Additional Test - Bridge Test





================================================================


Additional Test - Homeplugs

D-Link DHP-306AV Homeplug - Product Info
Firmware version: 1.01
Hardware version: A1

D-Link DHP-W306AV Homeplug - Product Info
Firmware version: 1.01
Hardware version: A1



Aztech HL115EP Homeplug - Product Info
Hardware version: 1.0

Have you tried connecting the Huawei 256s directly to Aztech HL115EP? i was thinking of doing that? not sure what kind of speeds i will get?
 

chercm

Arch-Supremacy Member
Joined
Sep 11, 2002
Messages
12,783
Reaction score
144
did starhub infinity block the incoming ports 8000? i tried to connect to something from the internet not working .

could some one help confirm ?
 
Last edited:

stilnox

Member
Joined
Aug 16, 2001
Messages
144
Reaction score
0
did starhub infinity block the incoming ports 8000? i tried to connect to something from the internet not working .

could some one help confirm ?

not sure if what i do help.. i forward port 8000 to NAS torrent. than access NAS torrent gui by 3G port 8000. ok can access.. not sure help u or not..
 

chercm

Arch-Supremacy Member
Joined
Sep 11, 2002
Messages
12,783
Reaction score
144
i did a dyndns on the RG and DMZ of my time capsule and it is set on a static ip

and the device is on a static ip and port forwarded on the time capsule on port 8000 and it have been always working till this morning

i can access within the lan but not from external getting timed out error
 

stilnox

Member
Joined
Aug 16, 2001
Messages
144
Reaction score
0
i did a dyndns on the RG and DMZ of my time capsule and it is set on a static ip

and the device is on a static ip and port forwarded on the time capsule on port 8000 and it have been always working till this morning

i can access within the lan but not from external getting timed out error

i dun have time capsule.. sorry mate.. but i can be sure is that 3g to home via 8000 is ok wor..
 
Last edited:

stilnox

Member
Joined
Aug 16, 2001
Messages
144
Reaction score
0
i did a dyndns on the RG and DMZ of my time capsule and it is set on a static ip

and the device is on a static ip and port forwarded on the time capsule on port 8000 and it have been always working till this morning

i can access within the lan but not from external getting timed out error

chercm, ask u something, is it must use port 8000?
 

toxicbananna

Member
Joined
Aug 17, 2002
Messages
166
Reaction score
0
hi guys,

i need help for ftp. currently my setup is as below

Termination Point (TP) -> Optical Network Terminal (ONT) -> D-Link DVG-N5402SP -> Linksys WRT320 -> NAS

My NAS has already have DDNS and im able to connect from homenetwork but not from outside.. please help to advice.
 

stilnox

Member
Joined
Aug 16, 2001
Messages
144
Reaction score
0
hi guys,

i need help for ftp. currently my setup is as below

Termination Point (TP) -> Optical Network Terminal (ONT) -> D-Link DVG-N5402SP -> Linksys WRT320 -> NAS

My NAS has already have DDNS and im able to connect from homenetwork but not from outside.. please help to advice.

Did you configure your router DDNS? From your post you mention NAS already have DDNS. but did not mention if router is setup.

Not sure if my comments help. if i have a similar layout, assuming ddns set up. i would port forward from dlink to wrt and wrt to nas. For me i would have just stuck my nas into the dlink instead.
 

shawn_sboi

Arch-Supremacy Member
Joined
Mar 27, 2005
Messages
11,254
Reaction score
4
Current RG D-link dvg-N5402SP is giving me a headache everytime i use the phone line.

phone call between 15min-1hours+ can suddenly go silent and internet also gone.

Called starhub and they haven't get back to me yet.

Termination Point (TP) -> Optical Network Terminal (ONT) -> D-Link DVG-N5402SP -> DIR-825
 
Important Forum Advisory Note
This forum is moderated by volunteer moderators who will react only to members' feedback on posts. Moderators are not employees or representatives of HWZ Forums. Forum members and moderators are responsible for their own posts. Please refer to our Community Guidelines and Standards and Terms and Conditions for more information.
Top