Bieffe
Supremacy Member
- Joined
- Sep 14, 2001
- Messages
- 6,021
- Reaction score
- 50
connect LAN 1 to your laptop direct via a network cable. Access Asus using browser.
connect LAN 1 to your laptop direct via a network cable. Access Asus using browser.
connect LAN 1 to your laptop direct via a network cable. Access Asus using browser.
Connection check.It is wire direct to ONT . ROUTER and ONT are both power on.
Check.ONT port 1 b linking . result no changeConnection check.
-wall to modem by optical cable usually yellow with green plugs
-LAN 1 of modem connect to WAN of router by network cable
-on modem online then on router
-connect LAN 1 of router to LAN of laptop
-access router using browser
What u see so far?
Is ur LINK light on the ONT on? Blinking off?
On the left...there is a light labeled link. Is it on?Port 1 blinking on ONT.
I feel just some hardware issues. I suspect broken optical cable.wah, whole hwz dominated by mryang's experience on starhub.
now i don't know wanna move to starhub or notsingnet stable but expensive.
wah, whole hwz dominated by mryang's experience on starhub.
now i don't know wanna move to starhub or notsingnet stable but expensive.
wah, whole hwz dominated by mryang's experience on starhub.
now i don't know wanna move to starhub or notsingnet stable but expensive.
Avoid ST too, they give a lousy aZtech DSL 7000, is worse than DIR 865l.
Now M1 look the most value for money.
Outside the 3 telcos I got no comment due to most of my friends are with the 3 telcos.
starhub sucks. that's final. i thought singtel also offering 200mbps at like 49.90 only?
plug back the provided router also don't work right? Means not problem of ONT not activated.
No not working.plug back the provided router also don't work right? Means not problem of ONT not activated.
Plug network from laptop to LAN 1 of modem..can work?
mryang, have you tried turning off all your devices for at least a minute? make sure everything is connected (hardware), then turn off all equipment - PC, ONT, router, and anything in between for at least a minute, then turn them on again. See if that works...