The NERF Hobby

Nerf Nerd

Member
Joined
Dec 15, 2008
Messages
110
Reaction score
0
Let me share the story of my 1 day old vulcan.

It was fun after I opened it from my box. It was like holding a newborn baby in my arms. 2 hours later, the cocking mechanism jammed, it could not be fired automatically nor manually. It was pronouced dead today at 11am after I failed to open it up.

Farewell Vulcan, it was good to have owned you and made everyone around me awestrucked T_T

oh man, can exchange?
 

Wadafishy

Member
Joined
May 22, 2007
Messages
343
Reaction score
0
Let me share the story of my 1 day old vulcan.

It was fun after I opened it from my box. It was like holding a newborn baby in my arms. 2 hours later, the cocking mechanism jammed, it could not be fired automatically nor manually. It was pronouced dead today at 11am after I failed to open it up.

Farewell Vulcan, it was good to have owned you and made everyone around me awestrucked T_T

I think u should do a circuit check. Im very sure there must be a disconnected point in the circuit. Use a multimeter and check thru all the connection point. Thats what happen to my vulcan, did the check n revived it pronto!

Oh and check the bare wire connection on the motor itself....that is where mine motor was disconnected. :)
 

hiimajerk

Senior Member
Joined
Sep 14, 2008
Messages
1,526
Reaction score
35
Cocking mechanism leh... o.o

Not put battery cant fire...

Still need to do circuit check?

Even the bolt cant be pulled back all the way...
 

ernanist

Junior Member
Joined
Jul 19, 2003
Messages
48
Reaction score
0
they better stop this nonsense of new models if they dont intend to ship to spore and in a timely manner ... or else (buzz bee all the way :s13::s13::s13::s13::s13: ... just kidding).

... and some of them are rumoured to be upcoming new nerf blasters for 2009. :D
.
 

ernanist

Junior Member
Joined
Jul 19, 2003
Messages
48
Reaction score
0
would hasbro like to comment on the inferior vulcans they are sending us?

I think u should do a circuit check. Im very sure there must be a disconnected point in the circuit. Use a multimeter and check thru all the connection point. Thats what happen to my vulcan, did the check n revived it pronto!

Oh and check the bare wire connection on the motor itself....that is where mine motor was disconnected. :)
 

Wadafishy

Member
Joined
May 22, 2007
Messages
343
Reaction score
0
Cocking mechanism leh... o.o

Not put battery cant fire...

Still need to do circuit check?

Even the bolt cant be pulled back all the way...

Then most prolly its gear jam or mis-align..but can the motor still move?
I think your vulcan still be revive, just check the sophisticated gears and see whats causing the jam. Good luck!
 

CheenaMan

Senior Member
Joined
May 17, 2008
Messages
1,544
Reaction score
0
Just painted the scope for longshot...

IMG_0413.jpg
 

Maxxum

Member
Joined
Jul 22, 2000
Messages
388
Reaction score
0
wad the price of the iron man blaster at carre 4?? wad u mean sp= 20$ then cc holder 19$???

Hi, thought my photo already answer the qns? Carrefour selling the iron man nerf at $20 (u.p $69.90). DBS everyday card holder enjoy 5% rebate which means $19 if u factor in the disc.
 

CheenaMan

Senior Member
Joined
May 17, 2008
Messages
1,544
Reaction score
0
metalic blue from tamiya paint...Dun think nippon's metalic will have better effect then model paint...:o
 

SgNerf

Member
Joined
Sep 29, 2008
Messages
160
Reaction score
0
With the increase in people buying nerf blasters, i've been getting queries about how to fix blasters that are faulty right out of the box.

As with all products, there is always a chance you might get a "lemon".

The best solution is to test your blasters for a few days before throwing out the box, wrappings and receipts, at least you can "re-pack" it and return if its faulty. Shops will only accept returns or exchanges if products are still in the box with wires and wrappings intact.

For Iron Man Blasters in particular, you guys have to really watch out for the odd units with air leak faults, especially those of you who bought lots of extra boxes hoping to keep some as gifts or to sell to others. You wouldn't want to give or sell it to someone else a few weeks later and then they discover its faulty.

Iron Man Blasters are zip-tied to the boxes, so the best way to test them without cutting the ties is to just open the side of the box and pump the blaster 10-15 times, put your ear close to the casing and listen a while for any signs of a constant tiny hissing sound (this is different from the brief over-pressure valve release sound when you pump it 20+ times).

If you don't hear the sound, then its okay. Remember to press the trigger to fire off the remaining stored compressed air before keeping it (since its without the clip, just use any object to press the safety catch to release the trigger).

If you do hear a constant tiny hissing sound even when the blaster is idle, immediately pack it back and return or exchange it, that is an air leak fault that is very difficult to trace and fix! :o

My friend bought 5 boxes and tested all of them the above way, 1 of the blasters had this air leak fault so he went back to Carrefour with the box intact and exchanged it for another one.

Now... i got a feeling the carrefour staff just simply put that faulty one back on the display, and there might be a few amongst the stack that are "returns" too, so do test all your Iron Man Blasters first to avoid disappointment. :)
.
 
Last edited:

hiimajerk

Senior Member
Joined
Sep 14, 2008
Messages
1,526
Reaction score
35
Well...

If all else fails, i will do my utlimate move to ressurect my vulcan to a brand new one!
 

destan

Senior Member
Joined
Apr 7, 2003
Messages
1,749
Reaction score
6
Anyone can help to check Iron Man Blasters at carrefour still available cos I'll be going down today. Thanks
 

opolpol

Junior Member
Joined
Dec 3, 2008
Messages
11
Reaction score
0
Anyone can help to check Iron Man Blasters at carrefour still available cos I'll be going down today. Thanks

while you're there can you check for me again coz i'll be going there tomorrow...kinda late buyer..T.T no muneh
 

ernanist

Junior Member
Joined
Jul 19, 2003
Messages
48
Reaction score
0
just give them a call 6333 6868 to check for you.
i called them yesterday.
the nice gentleman told me they still had some on display and in the storeroom so no problem (total over 50pcs). unless someome like me comes along with a van to buy up the whole stock

btw they will not do a check on their inventory system but actually go and search for the product, so you have to say "The Big iron man gun".
if you use the actual name "Iron Man Stark Industries ... Blaster", they cant find it. :s13::s13::s13:

Anyone can help to check Iron Man Blasters at carrefour still available cos I'll be going down today. Thanks
 
Last edited:

ernanist

Junior Member
Joined
Jul 19, 2003
Messages
48
Reaction score
0
...Remember to press the trigger to fire off the remaining stored compressed air before keeping it (since its without the clip, just use any object to press the safety catch to release the trigger).

but be careful not to get hurt by the ratchet.:s13:

My friend bought 5 boxes and tested all of them the above way, 1 of the blasters had this air leak fault so he went back to Carrefour with the box intact and exchanged it for another one.

Now... i got a feeling the carrefour staff just simply put that faulty one back on the display, and there might be a few amongst the stack that are "returns" too, so do test all your Iron Man Blasters first to avoid disappointment. :)
.

Be responsible and tell them that the product is faulty and not to put it back for sale.
i believe that they will place it in the damaged stack. even to get a refund its ok to tell them that it is spoilt.
 
Last edited:
Important Forum Advisory Note
This forum is moderated by volunteer moderators who will react only to members' feedback on posts. Moderators are not employees or representatives of HWZ Forums. Forum members and moderators are responsible for their own posts. Please refer to our Community Guidelines and Standards and Terms and Conditions for more information.
Top