Just want to share that I am on My Republic, purchased an EB810v from carousell, and I am able to update firmware via Aginet software. Didn’t notice what was the original build, new build is 250821.
Yup quite lousyI read the SH site again and it is just HD. Not cheap.
Have been following up with Starhub and TP-Link on future firmware update but the same situation is happening whereby they are just pushing the responsibility on each other.
When I raised to Starhub about the intermittent disconnection, they advised that it might be hardware issue (despite having already switched the unit once) and want to send someone down again but will charge me if there is no hardware issue.
For context, have been on beta firmware shared by TP-Link since Jan. Last time I have signing with Starhub and to use TP-Link routers.
Already switched off the 2.
The disconnections only occur on selected devices like LG OLED TV, PS5, Xbox and selected smart appliances like Nespresso etc. Might be a firmware compatibility issue.
Try to email to feedback to IMDA.Have been following up with Starhub and TP-Link on future firmware update but the same situation is happening whereby they are just pushing the responsibility on each other.
When I raised to Starhub about the intermittent disconnection, they advised that it might be hardware issue (despite having already switched the unit once) and want to send someone down again but will charge me if there is no hardware issue.
For context, have been on beta firmware shared by TP-Link since Jan. Last time I have signing with Starhub and to use TP-Link routers.
Already disabled long ago after i read but still the same. I keep getting call back that keep deferring my case. Starhub poor service.intermittent disconnection on WIFI?
Check:
1) Disable MLO channel.
MLO feature causes issue than making the WIFI better.
Cuz all the channel are merged into one.
2) Disable Band steering.
Check if your router have these two enabled.
Cuz mine is working properly but I disabled these two settings.
Seems like Starhub will replace EB810V soon with HB811 - https://www.tp-link.com/sg/service-provider/wifi-router/hb811/#overview
Very much prefer option for ASUS.TP-Link service provider models kind of become dominant for StarHub (EB810v, HB710 and HB410) and SingTel (HB810 and HB611-SGST). Now they are also at M1 (EB832 and EB210 Pro) and MR (HB710 and EB210 Pro).
Kind of good (usually cheaper than corresponding consumer models) and bad (less firmware features, less frequent firmware updates, less technical support).
Amazon eero is now offered by eight, SIMBA and VQ.
The router look very very basic la. HB811 lacks a lot of things. Processor only 1.8That will be an interesting change. Let's see.
HB811 is very similar to HB810(SGST) for SingTel.
https://www.tp-link.com/sg/service-provider/wifi-router/hb810/
That is the reason why i dare not buy my own router. I hope TP-Link will update the firmware to resolve the issue.Just sharing, currently I am testing my replacement EB810V set from Starhub.
The set I got it directly from service centre not through Starhub.
I will see if the WIFI disconnecting issue is still there.
But a word of advice please do not ownself replace the EB810V.
For whatever reasons after I replace the router, my home internet went
down for about half an hour.
I have to call Starhub for assistance, they did something on the ONT
side than the EB810V was working properly.
Cuz the EB810V wasn't able to detect any IP address on the ONT.
Is very strange issue in the past I have never encounter such issue.
If I want to swap or replace router I can do it without encountering any issue.
Anyone successfully connect HB611 as a satellite router to EB810V with same SSID for a seamless coverage?
HB611 like unable to easymesh with new firmware
Hmm, that will be strange. Maybe you want to provide more details.
https://www.tp-link.com/sg/service-provider/wifi-router/hb611-sgst/
Mesh Technology EasyMesh compatible and supports 802.11k/v/r
It will be shown offline in Archer router even though it's in the easymesh list.
Tried asking TP-Link support and was given this reply
"HB611, were developed in collaboration with Singtel. As part of this partnership, these routers are optimized and configured to work exclusively on Singtel's network and are designed to form an EasyMesh only with routers provided or certified by Singtel. This ensures seamless performance and full compatibility within the Singtel's ecosystem, but it does mean that these models are not compatible with standard retail TP-Link products for EasyMesh purposes.
To help you expand your Mesh network effectively, please contact Singtel to inquire about purchasing an additional router that is fully compatible with your current device for EasyMesh setup. "
i try before HB611 link to BE230 easymesh is fully compatible
The prev firmware can link too. but new one like cannot