i_got_a_question_to_ask
Supremacy Member
- Joined
- Jun 6, 2007
- Messages
- 7,216
- Reaction score
- 2,224

Thanks for this!When I think about welting / construction choices, and sole choices.... I think about a few things and what my priorities are.
1) Water permeability of the sole.
2) "Strength" of construction / welting process. And it's inherent water resistance.
3) Is there an aesthetic concern?
Now, how are some of the ways one might get their feet wet?
1) Through direct seepage from the outsole, up through the filler, then through the insole, and to your feet.
2) Through the weakest link in the shoe, where the uppers and the outsole meet. This is where welting and construction come into play.
3) Directly through soaking of the uppers.
Now, it is time to discuss:
1) Outsole material:
Rubber will be impermeable to water. Rubber is also immune to mould growth (bigger factor for me). This is probably the best material for our monsoon season. Many options here... Rubber topy, Tomir sole, Dainite (single / double), Victory, Commando. Apart from the first 2, sole profiles get progressively bulkier, but also more capable of taking a beating. Single dainite is fairly sleek IMO, with a side profile hardly discernible from single leather soles. It is also fairly flexible and comfortable to walk in.
Double leather soles while maybe offering more buffer (before being soaked through) in wet weather, is just as permeable to water as single leather soles, and just as vulnerable to mould growth if stored in humid conditions after a soaking. It is also a little stiffer to walk in.
2) Strength of construction / welting:
When you analyse each component of the welting process, you'll actually realise that almost EVERYTHING is permeable to water, EXCEPT the waxed linen thread for inseaming / outsole stitching (for a handwelted shoe). Blake stitched would be most vulnerable, then GYW, then Blake Rapid, then handwelt, then Norwegian, in that order.
Storm welting is just a modified GYW method where there is an additional raised "vertical" rib on the welt, that goes up the edges of the uppers closest to the welt. Nothing fancy. And probably just some additional "protection", probably not a lot, and also a good deal chunkier. Also machine made. I wouldn't exactly say this is more water resistant than a properly done handwelted shoe.
Norwegian is the most water resistant of all. The main difference is that the uppers are turned outwards instead of inwards, with stitching between:
- the uppers and insole
- the outward turned uppers and a midsole
- the midsole and the outsole
Only can be done by hand.
Of significant mention, there's an even tougher construction method (veldtschoen) where there is a welt in addition to a midsole.
Here is my $20 method
Bo bian cuz my walk style always destroy the toe first
Why would you want to install a metal toe-tap? I find them a little noisy. Other than it being aesthetically pleasing. I think rubber toe-taps, or simply slapping on a vibram rubber half soles work well too.
When I think about welting / construction choices, and sole choices.... I think about a few things and what my priorities are.
1) Water permeability of the sole.
2) "Strength" of construction / welting process. And it's inherent water resistance.
3) Is there an aesthetic concern?
Now, how are some of the ways one might get their feet wet?
1) Through direct seepage from the outsole, up through the filler, then through the insole, and to your feet.
2) Through the weakest link in the shoe, where the uppers and the outsole meet. This is where welting and construction come into play.
3) Directly through soaking of the uppers.
Now, it is time to discuss:
1) Outsole material:
Rubber will be impermeable to water. Rubber is also immune to mould growth (bigger factor for me). This is probably the best material for our monsoon season. Many options here... Rubber topy, Tomir sole, Dainite (single / double), Victory, Commando. Apart from the first 2, sole profiles get progressively bulkier, but also more capable of taking a beating. Single dainite is fairly sleek IMO, with a side profile hardly discernible from single leather soles. It is also fairly flexible and comfortable to walk in.
Double leather soles while maybe offering more buffer (before being soaked through) in wet weather, is just as permeable to water as single leather soles, and just as vulnerable to mould growth if stored in humid conditions after a soaking. It is also a little stiffer to walk in.
2) Strength of construction / welting:
When you analyse each component of the welting process, you'll actually realise that almost EVERYTHING is permeable to water, EXCEPT the waxed linen thread for inseaming / outsole stitching (for a handwelted shoe). Blake stitched would be most vulnerable, then GYW, then Blake Rapid, then handwelt, then Norwegian, in that order.
Storm welting is just a modified GYW method where there is an additional raised "vertical" rib on the welt, that goes up the edges of the uppers closest to the welt. Nothing fancy. And probably just some additional "protection", probably not a lot, and also a good deal chunkier. Also machine made. I wouldn't exactly say this is more water resistant than a properly done handwelted shoe.
Norwegian is the most water resistant of all. The main difference is that the uppers are turned outwards instead of inwards, with stitching between:
- the uppers and insole
- the outward turned uppers and a midsole
- the midsole and the outsole
Only can be done by hand.
Of significant mention, there's an even tougher construction method (veldtschoen) where there is a welt in addition to a midsole.
just bought a pair of Loake Hyde from robinson's shoes . any reviews?
Thanks for sharing. This is very informative. How about uppers? Are suede more waterproof?
I tend to favour dainite soles for the lower end GYW shoes with open channeljust got a pair of Carlos santos suede chukka with dainite sole. Works well in the rain. Sole is super hard though... And chukka causes blisters at a different place than other shoes....
I wonder what kind of review you're looking for though.just bought a pair of Loake Hyde from robinson's shoes . any reviews?
Another thing about suede
The flesh side out variant (roughout) is more sturdy than the buffed/split variant.
WWII marine boots you see throughout the Pacific Campaign were made of roughout, which was cheaper as you didnt need to line them.
Aesthetic wise however, the nap is shaggier then the buffed/spilt variety, which may not be so ideal for fine shoes
Not necessarily so.
Most if not all the best bespoke makers use reverse calf for their suede shoes, it's only right.
The nap can be incredibly fine.
Take a look at some of the Jap bespoke guys' suede stuff. Beyond comparison.
Not necessarily so.
Most if not all the best bespoke makers use reverse calf for their suede shoes, it's only right.
The nap can be incredibly fine.
Take a look at some of the Jap bespoke guys' suede stuff. Beyond comparison.
I meant for roughout in its unadulterated form with the fleshside left as it is, which is inherently shaggy
If a fleshside suede is to present an even soft nap, then that means buffing past the flesh layer to the corium strata would be required
On the basis of this directional presentation of fibres, I amongst others (like dwf lol) feel that this is inferior compared to the version been buffed down from the grain side instead (aka nubuck)
But then again only general assumptions can be made as other stuff like hide quality and tannage will play an equally big role as well.
Those jap process their leather before making shoes?
Or their source provide them with good stuff, at jap bespoke price only jap offer such quality? Vass and the likes cannot match?
When u say fine it's not snuffed as stated below?
http://www.rancourtandcompany.com/leathers
Well, the original discussion was between a split suede and reverse calf.
So your earlier post seemed to imply that splits would be more suitable for fine work as compared to reverse calf, which simply isn't correct.